Previous research has shown that the inflow conditions upstream of hydraulic jumps can affect flow aeration, bed pressures and turbulence. However, studies of the effects of inflow conditions on free-surface properties have not been conclusive and have lacked a comparison of partially and fully developed inflow conditions. Detailed measurements of the free-surface features in fully aerated hydraulic jumps with partially and fully developed inflow conditions have been conducted using a LIDAR. The results showed that the free-surface profile, the roller length, the free-surface and jump toe movements are strongly influenced by the inflow conditions. Hydraulic jumps with fully developed inflow conditions were of comparatively shorter length compared to partially developed hydraulic jumps, while they were characterized by stronger fluctuations, jump toe motions and frequencies as well as stronger energy loss across the hydraulic jump. Inflow conditions must be considered in determining the envelope of hydraulic jump motions with consequences for dissipator design.
A hydraulic jump is a complex, rapidly varied flow phenomenon occurring in the transition from supercritical to subcritical flows. Hydraulic jumps are characterized by instationary motions including jump toe oscillations and free-surface fluctuations. A light detection and ranging (LIDAR) instrument was used to continuously record the time-varying free-surface features of fully aerated hydraulic jumps with fully developed inflow conditions and high spatial and temporal resolution. The free-surface features were analyzed with two processing methods considering a freely moving hydraulic jump and a case where each instantaneous hydraulic jump profile was shifted to the mean jump toe position. The results provided detailed dimensionless distributions of the mean profiles, as well as free-surface fluctuations and jump toe oscillations that increased with increasing Froude numbers. The high spatial resolution data provided continuous free-surface time and length scales along the hydraulic jumps. Largest free-surface scales were observed close to the jump toe linked with longitudinal oscillations of the hydraulic jumps, and the dimensionless free-surface scales increased with the Froude number. The present study provides new insights into free-surface turbulent structures, highlighting the strong relationship between jump toe movements and free-surface fluctuations in hydraulic jumps.
Hydraulic jumps are characterized by three-dimensional motions, air entrainment and energy dissipation. While extensive air–water flow research has been conducted for classical hydraulic jumps, the air–water flow properties in hydraulic jumps on slopes remain widely unexplored. New air–water flow experiments were conducted of Type B and D jumps for slopes of 1.25°, 2.5° and 5°. Comparative analyses of the sloped jumps with classical hydraulic jumps for the same Froude and Reynolds numbers showed that hydraulic jumps on slopes were more stable. Close similarities in aeration and energy dissipation performances were found between the classical hydraulic jumps and Type B jumps while Type D jumps showed lower energy dissipation efficiency and aeration. Combining the observations of flow aeration and stability, the present results suggested that a Type B jump may be an optimum hydraulic jump achieving large energy dissipation while providing increased jump toe stability.
Novel air–water flow measurements were conducted in fully aerated hydraulic jumps with partially and fully developed supercritical inflow conditions. Irrespective of the inflow conditions, the hydraulic jumps resembled typical flow patterns with strong aeration and instabilities, albeit hydraulic jumps with fully developed inflow conditions had a more upward directed roller motion and a larger clear water core in the second half of the roller. Hydraulic jumps with fully developed inflow conditions had comparatively larger void fractions in the first half of the jump roller and larger bubble count rates throughout, while a comparatively larger number of smaller bubble sizes suggested a stronger break-up of bubbles. This was consistent with slightly larger interfacial velocities and turbulence intensities in the first half of the jump roller with fully developed inflow conditions. An assessment of the required sampling duration for air–water flow properties indicated the requirement to sample for at least five times longer than applied in previous studies. These results highlighted the need to carefully consider the inflow conditions and sampling parameters for aerated hydraulic jumps.