Hanwen Cui

Dr. Hanwen Cui

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 April 2021 in Journal of Hydraulic Research
Verified
Journal Article
Closed access
SFStefan Felder
Stefan Felder
LMLaura Montano
Laura Montano
Hanwen CuiHanwen Cui
Hanwen Cui
WPWilliam Peirson
William Peirson
MKMatthias Kramer
Matthias Kramer
Previous research has shown that the inflow conditions upstream of hydraulic jumps can affect flow aeration, bed pressures and turbulence. However, studies of the effects of inflow conditions on free-surface properties have not been conclusive and have lacked a comparison of partially and fully developed inflow conditions. Detailed measurements of the free-surface features in fully aerated hydraulic jumps with partially and fully developed inflow conditions have been conducted using a LIDAR. The results showed that the free-surface profile, the roller length, the free-surface and jump toe movements are strongly influenced by the inflow conditions. Hydraulic jumps with fully developed inflow conditions were of comparatively shorter length compared to partially developed hydraulic jumps, while they were characterized by stronger fluctuations, jump toe motions and frequencies as well as stronger energy loss across the hydraulic jump. Inflow conditions must be considered in determining the envelope of hydraulic jump motions with consequences for dissipator design.

19 December 2023 in Journal of Environmental Management
Verified
Journal Article
Open access
YXYuekai Xie
Yuekai Xie
Hongxu WangHongxu Wang
Hongxu Wang
YGYingying Guo
Yingying Guo
CWChenman Wang
Chenman Wang
Hanwen CuiHanwen Cui
Hanwen Cui
JXJianfeng Xue
Jianfeng Xue
Microplastic (MP) can significantly affect soil behaviour and the ecosystem. This paper presents an experimental study to investigate the effects of MP contamination and leachate exposure on the desiccation cracks, hydraulic conductivity, and water retention properties of the natural black clay. The leachate was from a landfill in Australia. The black clay was incorporated with up to 2.0% MPs by weight (w/w) with diverse dimensions and mixed with water/leachate. The measured properties include saturated hydraulic conductivity (ksat), soil-water characteristic curves, moisture evaporation rates, and crack intensity factors. The results suggest that the inclusion of MPs significantly increases ksat, and this increase is more obvious for soils with larger dimensions and contents of MPs, e.g., ksat of the black clay with 2.0% of 500 μm MP increases significantly by 206% (p < 0.05). The black clay exposed to leachate exhibits a slight increase in ksat due to the low viscosity of leachate. The existence of MPs decreases the residual moisture contents and air-entry pressures, and so does the water retention capacity (v/v %) of the black clay. The exposure to leachate increases the air-entry pressures by 6.0%-15.8% of the clay. The evaporation rates increase with the dimensions and concentrations of MPs. The highest evaporation rate (0.96 g/h) can be observed in samples exposed to 2.0% 500 μm MP with water addition. For all samples, the crack intensity factors increase when MP content is between 0.2% and 1.0% and decreases slightly after that. After being exposed to leachate, the evaporation rates and crack intensity factors of the black clay are decreased by 2.4%-12.6% and 3.6%-13.7%, respectively.


6 October 2023 in Waste Management
Verified
Journal Article
Open access
YXYuekai Xie
Yuekai Xie
Hongxu WangHongxu Wang
Hongxu Wang
YGYingying Guo
Yingying Guo
CWChenman Wang
Chenman Wang
Hanwen CuiHanwen Cui
Hanwen Cui
JXJianfeng Xue
Jianfeng Xue
The effects of biochar-amended soils as landfill covers have been extensively studied in terms of liquid and gas permeability. However, the influences of biochar-amended soils on the performance of municipal solid wastes (MSWs) in bioreactor landfills have not been well understood. This paper investigates the potential application of biochar-amended soils as final and intermediate covers in landfills. The MSWs with biochar-amended soils as final and intermediate covers were recirculated with mature leachate in laboratory-scale bioreactors. The pH, chemical oxygen demand, ammonia and volatile fatty acids (VFAs) concentrations of leachates, mass reduction rates, settlement, methane, and total gas generations of MSWs were investigated. The results indicate that biochar-amended soils as intermediate landfill covers can provide pH-buffer capacity, increase the pH of leachate and decrease the accumulation of VFAs in the early stage of decomposition. The concentration of ammonia in the leachate with biochar-amended soils as intermediate cover is lower than that with natural soils. The application of biochar-amended soils as intermediate and/or final covers increases the biocompression ratios and settlement of MSWs. The application of biochar-amended soils as final cover slightly decreases the methane generation potential (L0). Biochar-amended soils as intermediate covers increase L0 by 10%, and biochar-amended soils as both intermediate and final covers enhance L0 by 25%. The increase in the ammonia removal, settlement, and methane yield indicates the viability of biochar-amended soils as intermediate landfill covers. Further studies can focus on the long-term behaviour of MSWs with soil covers with different biochar amendment rates and particle sizes.

11 June 2023 in Environmental Fluid Mechanics
Verified
Journal Article
Open access
PDF file
Hanwen CuiHanwen Cui
Hanwen Cui
SFStefan Felder
Stefan Felder
MKMatthias Kramer
Matthias Kramer
In vegetated flows, hydrodynamic parameters, such as drag coefficient, frontal area and deflected canopy height, influence velocity distributions, mean velocity and flow resistance. Previous studies have focused on flow–structure interaction in sparse vegetation, dense vegetation or transitional canopies, respectively. To date, a unifying approach to estimate hydrodynamic properties of submerged vegetated flows across the full vegetation density spectrum is missing. Herein, published data sets across a wide range of vegetation conditions were re-analysed using a previously proposed four-layer velocity superposition model. For the investigated vegetation conditions, the velocity model was able to match measured velocity distributions and depth-averaged mean velocity. The contribution of each velocity layer to the mean velocity was analyzed, showing that the mixing layer is dominant in transitional canopies with shallow submergence, and that the log-law layer is dominant in denser canopies with deeper submergence. Based upon velocity distributions, an explicit equation for the Darcy–Weisbach friction factors was deduced that is able to predict flow resistance as function of relative submergence. While each velocity distribution could be well described with the four-layer model across the range of vegetation conditions, some data scatter in model parameters was observed. To improve predictive capabilities of the model, future research should focus on detailed velocity measurements with high spatial resolution.

27 August 2024 in Waste Management
Verified
Journal Article
Open access
YXYuekai Xie
Yuekai Xie
CWChenman Wang
Chenman Wang
Hongxu WangHongxu Wang
Hongxu Wang
YGYingying Guo
Yingying Guo
Hanwen CuiHanwen Cui
Hanwen Cui
JXJianfeng Xue
Jianfeng Xue
The accumulation of microplastics (MPs) has been a major threat to the natural environment and human health. However, incineration and landfilling may not be appropriate for the management of MPs. This paper evaluated the feasibility of incorporating MPs with diverse dimensions (50 to 500 μm) and contents (2.5 % to 10 %) into geopolymer cured under different temperatures (40 and 80 °C). The compressive (fc) and flexural strength (ff) after curing and thermal exposure (200 to 600 °C) were determined. When cured at 40 °C, fc and ff decreased with percentages of MPs incorporated. By contrast, when cured at 80 °C, the addition of 2.5 % MPs increased fc and ff by up to 33 % (from 52.2 to 69.4 MPa) and 18 % (from 8.2 to 9.7 MPa), depending on MPs' sizes. The XRD and TGA results suggested that the observed increases in mechanical properties can be attributed to the formation of more calcium alumino (silicate) hydrates (C-(A)-S-H gels) induced by the incorporation of a small quantity of MPs (2.5 %). The SEM images also showed better adhesion between MPs and geopolymeric products when cured under 80 °C, potentially inhibiting crack development. After being exposed to evaluated temperatures (200 and 400 °C), fc of the specimens with 2.5 % MPs and cured at 80 °C was higher than that without MPs. The fc dropped dramatically due to the degradation of MPs between 400 and 600 °C. The increase in strength and heat resistance (up to 400 °C) of MPs-incorporated geopolymer cured under 80 °C indicated the potential recycling and reuse of MPs for geopolymer materials.