In this paper, a new method for the wireless detection of liquid level is proposed by integrating a capacitive IDC-sensing element with a passive three-port RFID-sensing architecture. The sensing element transduces changes in the liquid level to corresponding fringe-capacitance variations, which alters the phase of the RFID backscattered signal. Variation in capacitance also changes the resonance magnitude of the sensing element, which is associated with a high phase transition. This change in the reactive phase is used as a sensing parameter by the RFID architecture for liquid-level detection. Practical measurements were conducted in a real-world scenario by placing the sensor at a distance of approximately 2 m (with a maximum range of about 7 m) from the RFID reader. The results show that the sensor node offers a high sensitivity of 2.15°/mm to the liquid-level variation. Additionally, the sensor can be used within or outside the container for the accurate measurement of conductive- or non-conductive-type liquids due to the use of polyethylene coating on the sensitive element. The proposed sensor increases the reliability of the current level sensors by eliminating the internal power source as well as complex signal-processing circuits, and it offers real-time response, linearity, high sensitivity, and excellent repeatability, which are suitable for widespread deployment of sensor node applications.
13 February 2022 in Transactions on Emerging Telecommunications Technologies
The produced electric and magnetic fields due to lightning strikes to mountainous ground are determined in this paper. For the sake of simplicity a cone-shaped ground with finite conductivity is assumed to represent a natural nonflat ground. By this assumption, we deal with an axillary symmetrical structure so we use the cylindrical 2D-FDTD to save the simulation memory and time, dramatically. The return stroke channel is modeled using the antenna theory model with fixed inductive loading (ATIL-F) which is appropriately incorporated into the FDTD algorithm. We have derived the updating equations of 2D-FDTD for distributed resistance and inductance in ATIL-F model. Both the first and the subsequent return strokes are considered and their related radiated electromagnetic fields are determined and compared with each other. The fields are calculated at an intermediate horizontal distance from the cone-axis. The calculated results show that the presence of the cone-shape ground introduces an enhancement in electric and magnetic fields, for both first and subsequent return strokes. Since sharper lossy cone means larger current density in the ground, the increment in the amplitude of the fields is inversely proportional to the cone-angle. A hump is observed in electromagnetic field waveforms because of the current reflection form joint point of the cone-shape ground and the flat ground beneath it. It is more specific in the subsequent-stroke fields. simulation results for different cone-height are presented. It shows that for small values of height, the results approaches to those of the flat ground.
Reliable, low-latency wireless links for mobile Internet of Things (IoT) in complex indoor environments are critical for digital twins and augmented reality, where motion and blockage rapidly change line-of-sight and reflected path quality. High-fidelity ray tracing accurately evaluates such paths but is too costly to run online, while reinforcement learning (RL) enables fast sequential path selection yet requires a physically meaningful, transfer-capable representation. In addition, practical mobility-aware operation should optimize not only received power but also propagation delay. To address these needs, this paper proposes a mobility-aware physics-guided surrogate framework for dual-objective wireless path optimization under mobility, together with controller benchmarking and hardware validation. We extend a static surrogate-guided path-optimization pipeline into a mobility-aware framework that combines deployment-aligned state design, controller benchmarking, and competence-based training under receiver motion. Crucially, we integrate a Zad-off–Chu (ZC) correlation-based Time-of-Arrival (ToA) tracker for deployment-time measurement and hardware validation of received power and propagation delay under mobility. Hardware validation confirms that the proposed framework preserves strong agreement between surrogate predictions and measured received power / propagation delay under static and mobile conditions. Experiments show strong agreement between surrogate predictions and measurements, with coefficient of determination for both predicted received power (R2 = 0.9907) and propagation delay (R2 = 0.9848). Combined with initial zero-shot transfer to a held-out environment, the results demonstrate a practical framework that substantially narrows the sim-to-real gap for mobility-aware digital-twin and IoT systems.