Composite core-shell nanoparticles may have morpho-structural, magnetic, and optical (photoluminescence (PL)) properties different from each of the components considered separately. The properties of Fe₃O₄–TiO₂ nanoparticles can be controlled by adjusting the titania amount (shell thinness). Core–shell nanoparticles were prepared by seed mediated growth of semiconductor (TiO₂) through a modified sol-gel process onto preformed magnetite (Fe₃O₄) cores resulted from the co-precipitation method. The structure and morphology of samples were characterized by X-ray diffraction, transmission electron microscopy (TEM), and high resolution-TEM respectively. X-ray photoelectron spectroscopy was correlated with ICP-AES. Magnetic measurements, optical absorption spectra, as well as PL spectroscopy indicate the presence of a charge/spin transfer from the conduction band of magnetite into the band gap of titania nanocrystals. The process modifies both Fe₃O₄ and TiO₂ magnetic and optical properties, respectively.

Interest in measuring major and trace elements in plants has increased in recent years because of growing concerns about the elements’ contribution to daily intakes or the health risks posed by ingesting vegetables contaminated by potentially toxic elements. The recent advances in using inductively coupled plasma atomic emission spectrometry (ICP-OES) to measure major and trace elements in plant samples are reviewed in the present work. The sample preparation before instrumental determination and the main advantages and limitations of ICP-OES are described. New trends in element extraction in liquid solutions using fewer toxic solvents and microextractions are observed in recently published literature. Even though ICP-OES is a well-established and routine technique, recent innovations to increase its performance have been found. Validated methods are needed to ensure the obtaining of reliable results. Much research has focused on assessing principal figures of merit, such as limits of detection, quantification, selectivity, working ranges, precision in terms of repeatability and reproducibility, and accuracy through spiked samples or certified reference materials analysis. According to the published literature, the ICP-OES technique, 50 years after the release of the first commercially available equipment, remains a powerful and highly recommended tool for element determination on a wide range of concentrations.

Life cycle assessment of a technology is the key to technological development in the context of sustainable development. Orchard waste has been identified as a potential source of bioplastics. The objective of this study was to conduct a life cycle assessment of two specific bioplastic materials, namely, L-polylactic acid (PLA) and poly(3-hydroxybutyrate) (PHB). Bioplastics, such as PLA acid and PHB, can be used as alternatives to conventional plastics due to their biodegradability and non-toxicity, both of which have the potential to replace conventional petroleum-based plastics. Polylactic acid was synthesized from orchard waste in a series of stages, including biomass processing, pretreatment for carbohydrate extraction, simultaneous saccharification and fermentation (SSF), and microwave polymerization. PHB, another biodegradable polymer, is produced by microorganisms through the fermentation of sugars obtained from the same biomass. Applied LCAs show that for PLA production, the stages having the greatest environmental impact are biomass processing, pretreatment, and the SSF process, and for PHB production, very energy-intensive stages significantly contributing to the environmental impacts are biomass processing and pretreatment stages. For both PLA and PHB, the initial stages of biomass processing and pretreatment are the most energy-intensive and significant contributors to CO₂ emissions.

Two types of magnetite (Fe₃O₄) nanoparticles were investigated as adsorbents for the simultaneous removal of Pb(II), Cd(II), and As(III) metal ions from aqueous solution. Magnetite nanoparticles were prepared by two synthesis procedures, both using water as solvent, and are referred to as conventional Fe₃O₄ nanoparticles and green Fe₃O₄ nanoparticles. The latter used Citrus limon (lemon) aqueous peel extract as the surfactant. Box–Behnken experimental design was used to investigate the effects of parameters such as initial concentration (20–150 mg L⁻¹), pH (2–9), and biomass dosage (1–5 g L⁻¹) on the removal of Pb(II), Cd(II), and As(III) ions. The optimum parameters for removal of the studied metal ions from aqueous solutions, including the initial ion concentration (20 mg L⁻¹), pH (5.5) and adsorbent dose (5 g L⁻¹), were determined. The pseudosecond-order model exhibited the best fit for the kinetic studies, while adsorption equilibrium isotherms were best described by Langmuir and Freundlich models. The optimum conditions were applied for the treatment wastewater. The removal efficiencies of Pb(II), Cd(II), and As(III) using the conventional and green synthesized Fe₃O₄ nanoparticles were 59.4 ± 4.3, 18.7 ± 1.9 and 17.5 ± 1.6, and 98.8 ± 5.6, 46.0 ± 1.3, and 48.2 ± 2.6%, respectively. These results demonstrate the potential of magnetite nanoparticles synthesized using C. limon peel extract as highly efficient adsorbents for the removal of Pb(II), Cd(II), and As(III) ions from aqueous solution.

The paper presents the development, validation, and evaluation of measurement uncertainty of a method for quantitative determination of essential and nonessential elements in medicinal plants and their aqueous extracts by using inductively coupled plasma optical emission spectrometry.