In this paper, a multidisciplinary optimization design method and its verification of low-noise aircraft propellers considering aerodynamics, noise, and structural strength were carried out to further reduce the aerodynamic noise of the aircraft propellers. The Vortex Lattice Method-based Lift Surface Method and the Frequency-Domain-based Hanson Method were deployed to evaluate the aerodynamic performance and far-field noise of the propeller with validation by benchmark test result comparison, respectively. Integrating both of the aforementioned methods, the constraints, and a genetic algorithm with coding, a joint program was successfully proposed so that the aircraft propeller performance could be optimized comprehensively. In this program, the design variables contain blade structural strength-constrained distribution patterns of the chord length, twist angle, and dihedral angle along the blade radius. A maximum amount of noise reduction was settled as an optimization target. Meanwhile, it ensured no penalty for aerodynamic thrust and efficiency. The optimized propeller was successfully delivered by performing the developed program. Its structure examined strength tests such as static load and dynamic response, and its aerodynamic and aeroacoustic performances were tested at an aeroacoustic wind tunnel. As a result, the optimized propeller reduced its far-field noise emission peak by 2.7 dB at the first BPF under typical conditions and performed a maximum noise reduction of 4 dB for lower-thrust operations compared with the baseline propeller. For the latter operation, noise reduction at the second BPF was also obviously observed.

We report a kind of coiled-up meta-liners with nonuniform cross sections (CMNC), which can efficiently attenuate low-frequency sound waves under grazing flow with a deep subwavelength thickness (e.g., ∼λ/17 at 500 Hz). At a grazing flow Mach number of 0.26, the average transmission loss of the meta-liner is 12.6 dB at 500–1000 Hz, which is twice as much as that of a double-degree-of-freedom acoustic liner of the same size. Physically, the nonuniform cross-sectional distribution and significant cross-sectional area ratio enhances vortex shedding, thus resulting in severe acoustic energy dissipation. The excellent low-frequency acoustic attenuation performance of CMNC is investigated thoroughly with experimental, theoretical, and numerical methods. This work provides an avenue for low-frequency noise reduction in grazing flow scenarios (e.g., in a high bypass ratio turbofan engine).

An aircraft nacelle acoustic liner is a key mean of aircraft noise reduction. The success of its design depends strongly on the development of experimental technology, which is generally divided into two stages: impedance eduction and the modal verification of acoustic performance. The comparative study summarizes the impedance eduction technology based on the in-situ method and the straight forward method, and the acoustic modal measurement and control technology, as well as their applications in the design of the acoustic liner of an engine intake and exhaust ducts. The results show that the in-situ method has higher accuracy at low frequencies, and the accuracies of both methods are decreased in the high frequency range. Both methods show an acceptable accuracy and good applicability in the mid-frequency range. A modal generator was designed and used to emit separate and pure acoustic modes in sequence, and a comparative test was carried out on the two types of acoustic liner. Compared with the seamed acoustic liner, the seamless acoustic liner significantly improved its noise reduction effect at the multi-acoustic modes and target frequencies, which further increases the overall reduction up to 5.2 dB. Through research, reliable and validated technologies of acoustic performance tests for a nacelle acoustic liner were established.

The International Civil Aviation Organization (ICAO) sets strict limits for aircraft ramp noise, a key source of which is Auxiliary Power Unit (APU) inlet noise. This paper presents a systematic and computationally efficient design methodology for APU inlet mufflers. The high-frequency noise necessitates validating a single-degree-of-freedom liner impedance model up to 10,000 Hz. The core innovation overcomes prohibitive full-passage simulation costs (days) by optimally selecting attenuation center frequencies from the source spectrum and implementing an axially segmented design. This approach enables efficient, targeted optimization (minutes per case) and leverages acoustic mode scattering at segment interfaces to enhance overall attenuation. The design is verified via high-fidelity, full-flow-path simulation. Experimental validation under various operating conditions shows good agreement with predictions, achieving approximately 9 dB reduction in overall A-weighted Sound Power Level (OASPL) with consistent performance. The results demonstrate the feasibility and effectiveness of the proposed rapid, precise, and efficient design framework.