24 May 2024 in Journal of Applied Physics
We report a kind of coiled-up meta-liners with nonuniform cross sections (CMNC), which can efficiently attenuate low-frequency sound waves under grazing flow with a deep subwavelength thickness (e.g., ∼λ/17 at 500 Hz). At a grazing flow Mach number of 0.26, the average transmission loss of the meta-liner is 12.6 dB at 500–1000 Hz, which is twice as much as that of a double-degree-of-freedom acoustic liner of the same size. Physically, the nonuniform cross-sectional distribution and significant cross-sectional area ratio enhances vortex shedding, thus resulting in severe acoustic energy dissipation. The excellent low-frequency acoustic attenuation performance of CMNC is investigated thoroughly with experimental, theoretical, and numerical methods. This work provides an avenue for low-frequency noise reduction in grazing flow scenarios (e.g., in a high bypass ratio turbofan engine).
14 November 2025 in The Aeronautical Journal
To investigate the stall mechanisms of a multi-stage axial compressor under different rotational speeds and identify the initial stall stages, this study focuses on a high-load nine-stage axial compressor, validated through experimental data. The results reveal that at 100% corrected rotational speed, flow instability is primarily triggered by corner separation in the front four stators (S1–S4). At 80% corrected rotational speed, the instability stems from the interaction between the first rotor (R1) tip leakage vortex and the main flow, coupled with the front four stators’ corner separation. Precise identification of initial stall locations in multi-stage axial compressors is imperative. The study first employs qualitative flow-field analysis to identify initial stall locations by comparing meridional mass flux variation contour maps and axial velocity iso-surfaces. The results show that the stall inception occurs at the S2 root under 100% corrected rotational speed, while at 80% corrected rotational speed, stall initiates simultaneously at both the S2 root and the R1 tip. Furthermore, an innovative three-dimensional flow blockage quantification method was established to systematically evaluate blockage severity within multi-stage blade passages. This approach utilises relative blockage variation metrics to quantitatively identify regions of rapid flow deterioration, achieving remarkable consistency with qualitative flow-field analysis. The qualitative and quantitative analysis results have been mutually corroborated. The proposed blockage quantification approach enables precise evaluation across stages without complex flow fields comparisons, allowing rapid identification of stall-initiating locations and supporting subsequent stability enhancement optimization.