In this paper, we present a software-based approach for collision avoidance that can be applied in human–robot collaboration scenarios. One of the contributions is a method for converting clustered 3D sensor data into computationally efficient convex hull representations used for robot-obstacle distance computation. Based on the computed distance vectors, we generate collision avoidance motions using a potential field approach and integrate them with other simultaneously running robot tasks in a constraint-based control framework. In order to improve control performance, we apply evolutionary techniques for parameter optimization within this framework based on selected quality criteria. Experiments are performed on a dual-arm robotic system equipped with several depth cameras. The approach is able to generate task-compliant avoidance motions in dynamic environments with high performance.
Regardless of recent advances, humanoid robots still face significant difficulties in performing locomotion tasks. Among the key challenges that must be addressed to achieve robust bipedal locomotion are dynamically consistent motion planning, feedback control, and state estimation of such complex systems. In this paper, we investigate the use of an external motion capture system to provide state feedback to an online whole-body controller. We present experimental results with the humanoid robot RH5 performing two different whole-body motions: squatting with both feet in contact with the ground and balancing on one leg. We compare the execution of these motions using state feedback from (i) an external motion tracking system and (ii) an internal state estimator based on inertial measurement unit (IMU), forward kinematics, and contact sensing. It is shown that state-of-the-art motion capture systems can be successfully used in the high-frequency feedback control loop of humanoid robots, providing an alternative in cases where state estimation is not reliable.
ARC-OPT (Adaptive Robot Control using OPTimization) is a C++ library for Whole-Body Control (WBC) (Sentis & Khatib, 2006) of complex robotic systems, such as humanoids, quadrupedal robots, or mobile manipulators. In general, WBC describes a robot control problem in terms of costs and constraints of a quadratic program (QP). The cost function thereby minimizes the residuals of multiple feedback controllers, each dedicated to a specific robot task, along with further objectives. In each control cycle, the QP is solved and the solution, which should fulfill all objectives if possible, is sent to the robot's actuators. WBC is a reactive control approach, which targets redundant robots and is able to control multiple tasks simultaneously, like, e.g., grasping and balancing on a humanoid robot.