Carlos Perez-Vidal

Dr. Carlos Perez-Vidal

System Engineering and Automation Department, Universidad Miguel Hernandez, 03202 Elche, Spain
orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 November 2018 in Journal of Manufacturing Science and Engineering
Verified
Journal Article
Closed access
PDF file
J. Ernesto SolanesJ. Ernesto Solanes
J. Ernesto Solanes
Luis GraciaLuis Gracia
Luis Gracia
Pau Muñoz BenaventPau Muñoz Benavent
Pau Muñoz Benavent
Jaime Valls MiroJaime Valls Miro
Jaime Valls Miro
Carlos Perez-VidalCarlos Perez-Vidal
Carlos Perez-Vidal
JTJosep Tornero
Josep Tornero
This work presents a hybrid position-force control of robots for surface polishing using task priority. The robot force control is designed using sliding mode ideas in order to benefit from its inherent robustness and low computational cost. In order to avoid the chattering drawback typically present in sliding mode control, several chattering-free controllers are evaluated and tested. A distinctive feature of the method is that the sliding mode force task is defined using not only equality constraints but also inequality constraints, which are satisfied using conventional and nonconventional sliding mode control, respectively. Moreover, a lower priority tracking controller is defined to follow the desired reference trajectory on the surface being polished. The applicability and the effectiveness of the proposed approach considering the mentioned chattering-free controllers are substantiated by experimental results using a redundant 7R manipulator.

26 April 2012 in Sensors
Verified
Journal Article
Open access
PDF file
RMRicardo Morales
Ricardo Morales
FBFrancisco Javier Badesa
Francisco Javier Badesa
NGNicolas Garcia-Aracil
Nicolas Garcia-Aracil
Carlos Perez-VidalCarlos Perez-Vidal
Carlos Perez-Vidal
Jose Maria Sabater-NavarroJose Maria Sabater-Navarro
Jose Maria Sabater-Navarro
This paper presents a microdevice for monitoring, control and management of electric loads at home. The key idea is to compact the electronic design as much as possible in order to install it inside a Schuko socket. Moreover, the electronic Schuko socket (electronic microdevice + Schuko socket) has the feature of communicating with a central unit and with other microdevices over the existing powerlines. Using the existing power lines, the proposed device can be installed in new buildings or in old ones. The main use of this device is to monitor, control and manage electric loads to save energy and prevent accidents produced by different kind of devices (e.g., iron) used in domestic tasks. The developed smart device is based on a single phase multifunction energy meter manufactured by Analog Devices (ADE7753) to measure the consumption of electrical energy and thento transmit it using a serial interface. To provide current measurement information to the ADE7753, an ultra flat SMD open loop integrated circuit current transducer based on the Hall effect principle manufactured by Lem (FHS-40P/SP600) has been used. Moreover, each smart device has a PL-3120 smart transceiver manufactured by LonWorks to execute the user’s program, to communicate with the ADE7753 via serial interface and to transmit information to the central unit via powerline communication. Experimental results show the exactitude of the measurements made using the developed smart device.

13 January 2024 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
JBJorge Borrell
Jorge Borrell
Carlos Perez-VidalCarlos Perez-Vidal
Carlos Perez-Vidal
JSJosé V. Segura-Heras
José V. Segura-Heras
This paper focuses on optimising pick-and-place tasks performed by a dual-arm collaborative robot in a specific shoe manufacturing industry environment. The robot must identify the pieces of a shoe placed on a tray, pick them up, and place them in a shoe mold for further processing. The shoe pieces arrive on the tray in random positions and angles and can be picked up in a different order. Optimising these tasks could increase the assembly speed of each unit and improve shoe production. To achieve this goal, a mathematical model based on binary integer linear programming (BILP) has been developed. This model determines the optimal sequence for picking and placing the shoe pieces in the mold, thus minimising the time required for picking and decision-making. The effectiveness of this approach has been tested using two 3-piece unit shoe models: one for training and another for validation. These models encompass a total of 500 trays. An analysis of the results reveals that BILP offers advantages for task motion planning in complex environments with multiple trajectories and the potential for collisions between arms. The model’s generalizability to shoes with n assembly pieces further confirms its robustness for various piece counts.

30 August 2017 in International Journal of Computer Integrated Manufacturing
Verified
Journal Article
Closed access
Carlos Perez-VidalCarlos Perez-Vidal
Carlos Perez-Vidal
Luis GraciaLuis Gracia
Luis Gracia
JPJ. M. de Paco
J. M. de Paco
MWMalte Wirkus
Malte Wirkus
Jose M. AzorinJose M. Azorin
Jose M. Azorin
JFJose De Gea Fernandez
Jose De Gea Fernandez
This work presents a robotic-based solution devised to automate the product packaging in industrial environments. Although the proposed approach is illustrated for the case of the shoe industry, it applies to many other products requiring similar packaging processes. The main advantage obtained with the automated task is that productivity could be significantly increased. The key algorithms for the developed robot system are: object detection using a computer vision system; object grasping; trajectory planning with collision avoidance; and operator interaction using a force/torque sensor. All these algorithms have been experimentally tested in the laboratory to show the effectiveness and applicability of the proposed approach.

22 January 2024 in Technologies
Verified
Journal Article
Open access
PDF file
DMDaniel Mateu-Gomez
Daniel Mateu-Gomez
FMFrancisco José Martínez-Peral
Francisco José Martínez-Peral
Carlos Perez-VidalCarlos Perez-Vidal
Carlos Perez-Vidal
This article addresses the problem of automating a multi-arm pick-and-place robotic system. The objective is to optimize the execution time of a task simultaneously performed by multiple robots, sharing the same workspace, and determining the order of operations to be performed. Due to its ability to address decision-making problems of all kinds, the system is modeled under the mathematical framework of the Markov Decision Process (MDP). In this particular work, the model is adjusted to a deterministic, single-agent, and fully observable system, which allows for its comparison with other resolution methods such as graph search algorithms and Planning Domain Definition Language (PDDL). The proposed approach provides three advantages: it plans the trajectory to perform the task in minimum time; it considers how to avoid collisions between robots; and it automatically generates the robot code for any robot manufacturer and any initial objects’ positions in the workspace. The result meets the objectives and is a fast and robust system that can be safely employed in a production line.

10 April 2012 in Sensors
Verified
Journal Article
Open access
PDF file
Gema RomeroGema Romero
Gema Romero
JSJosé Ramón Díaz Sánchez
José Ramón Díaz Sánchez
Jose Maria Sabater-NavarroJose Maria Sabater-Navarro
Jose Maria Sabater-Navarro
Carlos Perez-VidalCarlos Perez-Vidal
Carlos Perez-Vidal
The measurement of the milk electrical conductivity (EC) during mechanical milking has been widely studied for mastitis detection on cows because its improving of welfare and animal health, although research about small ruminants is scarce. The aim of this study was to evaluate the performance of three commercial conductimeters to be used during mechanical milking of small ruminant halves, especially Murciano-Granadina goats. The objective of this research was to integrate the probes on the milking unit and to check the suitability of the probe selected. The results presented in this research have guided authors to discard the commercial probes and to establish the requirements of a new probe design that is briefly outlined in the conclusions of this contribution.