The oxygen evolution reaction is the bottleneck to energy-efficient water-based electrolysis for the production of hydrogen and other solar fuels. In proton exchange membrane water electrolysis (PEMWE), precious metals have generally been necessary for the stable catalysis of this reaction. In this work, we report that delamination of cobalt tungstate enables high activity and durability through the stabilization of oxide and water-hydroxide networks of the lattice defects in acid. The resulting catalysts achieve lower overpotentials, a current density of 1.8 amperes per square centimeter at 2 volts, and stable operation up to 1 ampere per square centimeter in a PEMWE system at industrial conditions (80°C) at 1.77 volts; a threefold improvement in activity; and stable operation at 1 ampere per square centimeter over the course of 600 hours.
In this review we highlight the recent progress in 2DM growth on LMCat, which in combination with in situ characterization presents a viable and large-scale sustainable direction that has the prospect of achieving defect-free 2D materials.
29 July 2025 in Journal of the American Chemical Society
CO2 electroreduction (CO2R) in acidic media offers a path to high carbon utilization via local carbonate regeneration. However, this proton-rich environment challenges achieving a combined selectivity and rate toward multicarbon (C2+) products due to proton and intermediate competition. Here, we demonstrate a strategy to modulate local protons and intermediates, at these settings, using a polyionomer coating over benchmark copper gas diffusion electrodes. The polyionomer integrates amine (-NHx) function from branched polyethylenimine (PEI) with sulfonate (-SO3-) and amphiphilic functions from PFSA. We show that their chemical structure enables H-bonding interaction, leading to a stereochemical assembly that retains a structure-property relationship through a wide pH range (2-14). PFSA domains modulate *CO intermediates and local [CO2]/[H2O] and K+ environment, while partially protonated amines provide further control over proton availability and intermediate stabilization, which in combination enhance C-C coupling. When implemented in a flow cell (0.5 M K2/H2SO4, pH = 2), the optimized polyionomer coating enables a C2+ Faradaic efficiency of 61% at a single-pass CO2 utilization of 84%, including a conversion efficiency of 64% toward C2+, at a current density of at 0.3 A cm-2─an improvement of almost 30% in C2+ selectivity and 35% in carbon utilization compared to monofunctional coatings. These findings expand the toolbox of strategies to modulate CO2R microenvironments toward improved performance.
Graphene and other two-dimensional materials (2DMs) have been shown to be promising candidates for the development of flexible and highly-sensitive strain sensors. However, the successful implementation of 2DMs in practical applications is slowed down by complex processing and still low sensitivity. Here, we report on a novel development of strain sensors based on Marangoni self-assemblies of graphene and of its hybrids with other 2DMs that can both withstand very large deformation and exhibit highly sensitive piezoresistive behaviour. By exploiting the Marangoni effect, reference films of self-assembled reduced graphene oxide (RGO) are first optimized, and the electromechanical behaviour has been assessed after deposition onto different elastomers demonstrating the potential of producing strain sensors suitable for different fields of application. Hybrid networks have been then prepared by adding hexagonal boron nitride (hBN) and fluorinated graphene (FGr) to the RGO dispersion. The hybrid integration of 2D materials is demonstrated to become a potential solution to increase substantially the sensitivity of the produced resistive strain sensors without compromising the mechanical integrity of the film. In fact, for large quasi-static deformations, a range of gauge factor values up to 2000 were demonstrated, while retaining a stable performance under cyclic deformations.
The combination of two-dimensional materials (2D) into heterostructures enables their integration in tunable ultrathin devices. For applications in electronics and optoelectronics, direct growth of wafer-scale and vertically stacked graphene/hexagonal boron nitride (h-BN) heterostructures is vital. The fundamental problem, however, is the catalytically inert nature of h-BN substrates, which typically provide a low rate of carbon precursor breakdown and consequently a poor rate of graphene synthesis. Furthermore, out-of-plane deformations such as wrinkles are commonly seen in 2D materials grown by chemical vapor deposition (CVD). Herein, a wrinkle-facilitated route is developed for the fast growth of graphene/h-BN vertical heterostructures on Cu foils. The key advantage of this synthetic pathway is the exploitation of the increased reactivity from inevitable line defects arising from the CVD process, which can act as active sites for graphene nucleation. The resulted heterostructures are found to exhibit superlubric properties with increased bending stiffness, as well as directional electronic properties, as revealed from atomic force microscopy measurements. This work offers a brand-new route for the fast growth of Gr/h-BN heterostructures with practical scalability, thus propelling applications in electronics and nanomechanical systems.
CO2 electroreduction (CO2E) in acidic media enables high carbon utilization but is often limited by enhanced hydrogen evolution (HER). Cation-exchange ionomer coatings can suppress HER by enriching alkali cations at the catalyst surface, yet in situ SERS reveals that they also cause excessive *OH adsorption, hindering CO2 access and suppressing C–C coupling. To address this, we introduce ion management channels (IMCs), a spatially distributed ionomer architecture combining cation- and anion-exchange domains to modulate nanoscale ion transport. Applied to PTFE-Cu gas diffusion electrodes, IMCs facilitate the removal of excess *OH by restructuring interfacial water, increasing *CO coverage, and enhancing multicarbon (C2+) selectivity. IMC-functionalized electrodes achieve ∼80% Faradaic efficiency for C2+ products at 0.5 A·cm–2, with ∼90% single-pass carbon utilization sustained over 70 h of pulsed operation. This represents a 39% improvement in peak C2+ partial current density over monopolar cation-exchange ionomers and a ∼3.4-fold enhancement relative to bare Cu, highlighting the importance of ion-transport engineering for efficient CO2E.