Screw-type expanders offer excellent prospects for energy conversion in lower and medium power ranges, for instance as expansion engines in Rankine cycles with regard to either waste or geothermal heat recovery. With the aim of identifying the potential in organic Rankine cycle (ORC) power systems, an oil-flooded twin-screw expander without timing gears was designed and experimentally investigated in an ORC with R245fa as working fluid. Here, the scope for the experimental determination of the expander characteristic map was limited by the test rig specifications. Based on the experimental results, a multi-chamber model of the test twin-screw expander was calibrated and theoretical approaches according to mechanical and hydraulic loss calculation were applied. Consequently, the expander’s complete characteristic map could be calculated. Furthermore, relevant mechanisms influencing the operational behaviour of oil-flooded twin-screw expanders were identified and analysed in-depth.
Tribology, as the science and technology of interacting surfaces, typically relies on liquid lubricants which reduce friction and wear. For environmentally friendly tribological purposes and applications requiring a liquid-free performance, solid lubricants, such as MoS2 coatings, play an essential role. It is crucial to understand the interplay between the parameters of the coating synthesis and the characteristics of the coating. The impact of the deposition parameters on the structural, mechanical and frictional properties of MoSx thin films, which are synthesized by high-power impulse magnetron sputtering, are studied. The morphology, topography and stoichiometry (2.02 < x < 2.22) of the films are controlled by, in particular, the bias-voltage and heating power applied during the sputtering process. In combination with a low pulse frequency the hardness and elastic stiffness of the MoSx films are enhanced up to 2 and 90 GPa, respectively. This enhancement is assigned to a shortening of the Mo-S bonding lengths and a strengthening in the interatomic coupling as well as to a formation of small-sized crystallites at the surface. The friction coefficient reduces to µ = 0.10 for films with an initial (100) orientation and the mean roughness of the MoSx films decreases below 15 nm by shortening the cathode pulses.
9 November 2018 in IOP Conference Series: Materials Science and Engineering