Reducing the continuously growing cooling energy demand of buildings is an important part of achieving global emission targets. Here, we present an innovative scenario of how the integration of a programmable material into a climate-adaptive building envelope (CABE) can create an energy-efficient thermal management system inherent to the material. This novel concept is based on a thermoresponsive shape memory polymer foam (SMP) and is designed to regulate the flow of ambient air through the building envelope in order to enable natural cooling of the structure. Hygrothermal simulation data obtained by the software WUFI^® Plus indicate that significant cooling energy saving potential may be accessible with this type of concept. As a possible material basis for a corresponding adaptive element, a reactive foamed polyurethane-based SMP foam is proposed, which is capable of executing a thermoreversible shape change of more than 20% while having a suitable switching temperature range. Finally, the ecological impact of such a functional foam element is evaluated in detail as well as its influence on the overall balance of a façade construction by means of a life cycle assessment (LCA).

The consumption of construction materials and the pollution caused by their production can be reduced by the use of reliable adaptive load-bearing structures. Adaptive load-bearing structures are able to adapt to different load cases by specifically manipulating internal stresses using actuators installed in the structure. One main aspect of quality is reliability. A verification of reliability, and thus the safety of conventional structures, was a design issue. When it comes to adaptive load-bearing structures, the material savings reduce the stiffness of the structure, whereby integrated actuators with sensors and a control take over the stiffening. This article explains why the conventional design process is not sufficient for adaptive load-bearing structures and proposes a method for demonstrating improved reliability and environmental sustainability. For this purpose, an exemplary adaptive load-bearing structure is introduced. A linear elastic model, simulating tension in the elements of the adaptive load-bearing structure, supports the analysis. By means of a representative local load-spectrum, the operating life is estimated based on Woehler curves given by the Eurocode for the critical notches. Environmental sustainability is increased by including reliability and sustainability in design. For an exemplary high-rise adaptive load-bearing structure, this increase is more than 50%.

Due to the high consumption of resources and energy in the construction sector, the development of resource-efficient and sustainable construction solutions is gaining increasing attention. The awareness of sustainability and resource conservation results in the interest of using natural and renewable materials in contemporary architecture. Timber construction methods offer both constructive and ecological potential for sustainable solutions. From a building physics perspective, the acoustic performance of lightweight buildings, such as those made of timber, presents a challenge. Even if standard requirements are met, the increased low-frequency sound transmission typical for light-weight construction can cause discomfort and is already the subject of questions in building physics, which are currently increasingly extending to timber construction. Within the framework of a holistic approach, this paper compares the problem of acoustic properties, design optimizations and the ecological properties of timber-frame and solid timber construction components. The comparison with heavy materials, such as concrete, shows the relation of acoustic optimization with the change of the environmental profile. In order to establish the interaction between acoustic quality of wooden ceiling constructions and their ecological characteristics, this article aims to demonstrate the potential of materials used in the building sector under ecological aspects considering a life cycle analysis.

The importance of visualisations in context of life cycle assessment has been widely discussed and acknowledged in the literature. Especially with the increasing ability to process and create large-scale LCA results, visualisations are vital tools to not only analyse and interpret but also check and validate underlying datasets. Based on a dataset containing 1.25 million LCA results for all potential configurations within a defined parameter space, different visualisations and analysis methods were applied to identify hotspots, assess parameter sensitivity, gain insights to optimise environmental sustainability, and provide benchmarks for an adaptive, multilayer membrane façade. Box plots for the identification of hotspots, parameter sensitivity, and benchmarking, as well as colour-coded scatter plots, have proven to be incredibly versatile and effective for understanding the results and providing multiple perspectives to gain further insight. The ability to interact directly with interactive visualisation in order to identify and isolate specific areas of interest allows for a very efficient analysis of the relevant aspects of data. However, the usefulness of the proposed visualisations is not only dependant on the quality and characteristic of the underlying data but also on the objectives and scope of the study, as well as the intended medium illustrating the results.