This paper concerns the selectivity tuning of graphene oxide based gas sensor devices, where the role of oxygen functional groups like, carboxyl, carbonyl, hydroxyl (sp2), epoxy, and hydroxyl (sp3) were investigated for physisorption of NO2, NH3, CO, and H2O using first principle calculation (density functional theory) incorporating Atomistix Toolkit (v2015.1). Among the five functional groups under consideration, carboxyl, carbonyl, and hydroxyl (sp2) were considered at the edges on the basal plane, while epoxy and hydroxyl (sp3) groups were considered in the plane perpendicular to that. For all the species, the optimum positions for adsorption, adsorption energy and charge transfer efficiency were investigated for the above two planes. It was found that edge carboxyl group is the most favorable in terms of adsorption energy and charge transfer efficiency targeting NH3, CO, and H2O. On the contrary, for NO2, hydroxyl functionalization was found to be the most efficient one.
The present study concerns the enhancement of methanol selectivity of three dimensional (3D) nanoflowers (NFs) of ZnO by dispersing nickel oxide (NiO) and palladium oxide (PdO) nanoparticles on the surface of the nanoflowers to form localized hybrid nano-junctions. The nanoflowers were fabricated through a liquid phase deposition technique and the modification was achieved by addition of NiCl and PdCl2 solutions. In addition to the detailed structural (like X-ray diffraction (XRD), electron dispersive spectroscopy (EDS), X-ray mapping, XPS) and morphological characterization (by field emission scanning electron microscopy (FESEM)), the existence of different defect states (viz. oxygen vacancy) was also confirmed by photoluminescence (PL) spectroscopy. The sensing properties of the pristine and metal oxide nanoparticle (NiO/PdO)–ZnO NF hybrid sensor structures, towards different alcohol vapors (methanol, ethanol, 2-propanol) were investigated in the concentration range of 0.5–700 ppm at 100–350 °C. Methanol selectivity study against other interfering species, viz. ethanol, 2-propanol, acetone, benzene, xylene and toluene was also investigated. It was found that the PdO–ZnO NF hybrid system offered enhanced selectivity towards methanol at low temperature (150 °C) compared to the NiO–ZnO NF and pristine ZnO NF counterparts. The underlying mechanism for such improvement has been discussed with respective energy band diagram and preferential dissociation of target species on such 3D hybrid structures. The corresponding improvement in transient characteristics has also been co-related with the proposed model.
In this letter, a highly efficient room-temperature gas-sensor device based on the hybrid structure of TiO 2 nanotubes and reduced graphene oxide (RGO) is reported. TiO 2 NTs were grown by the electrochemical anodization technique followed by the electro-deposition of RGO layer in the form of discrete islands. The synergistic hybridization of the two different sensing elements was found to be superior to the performance of the individual ones. Room temperature (~27°C) gas-sensing performance, with methanol as a test species, was carried out and the fastest response and recovery times, reported so far, were achieved due to high carrier mobility of RGO. On the other hand, appreciably high response magnitude (96.93% at 800 ppm) was obtained due to the increased number of gas-interaction sites and availability of free surface energy provided by titania nanotubes and RGO. A comparative discussion elucidating the role of TiO 2 NTs-RGO junctions has also been presented co-relating the experimental findings.
29 June 2018 in IEEE Transactions on Electron Devices
This paper concerns a comparative study on the improved alcohol sensing performance of ZnO nanotubes (NTs) based devices via two means: 1) by widely explored catalytic noble metal (Pd) surface modification (Type 1 device) and 2) relatively less explored technique of surface decoration by reduced graphene oxide (rGO) (Type 2 device). Three types of alcohols viz., methanol, ethanol, and 2-propanol, in the concentration range of 1-800 ppm were considered as the test species for the above-mentioned two types of sensor devices and the results were compared with those of the pristine ZnO NTs based device also. It was found that the sensing performance of the modified devices (both Type 1 and Type 2) was remarkably improved compared to that of its pristine counterpart in terms of response magnitude, response time, and recovery time. The Pd-ZnO NTs hybrid structure offered better sensing performance toward methanol, while the rGO-ZnO NTs hybrid structure offered the same toward ethanol. The underlying sensing mechanism for such improvement of the modified devices toward a specific alcohol species was also elucidated correlating the molecular size of the target species, respective dissociative electron attachment (DEA), and associated band diagram of the hybrid structures.
As 2D materials are aggressively penetrating the arena of conventional metal oxides-based gas sensors, tungsten disulfide (WS2) as a ‘beyond graphene and beyond MoS2 layered material’ is appearing with shining visibility owing to its exquisite electronic, surface, optical, physicochemical and thermal properties. Micromechanically exfoliated or homogeneously/ heterogeneously synthesized mono/few-layer(s) of this transition metal di-chalcogenide (TMD), with excellent tunability of almost all the properties, have intrigued worldwide gas sensor researchers to demonstrate various device configurations using WS2 leading to ultrahigh sensitivity with ppb level detection capacity even at room temperature. This review article presents a holistic overview of the WS2 based gas sensors encompassing the impact(s) of the different device architectures (viz. planar, Schottky, heterojunctions, field-effect and heterojunction bipolar transistors etc.) on the gas sensing performance indices (like sensitivi ty, selectivity, response/recovery time, humidity effect and baseline drift). Starting with the brief overview of the sensing mechanism of WS2, followed by elaborate discussions on the unique features/advantages and bottlenecks of each of the innovative device architecture investigated, this review concludes by focusing the possible direction to circumvent the most common challenges (like slow and incomplete recovery, vulnerability to humidity and oxidation), that slacken the commercial viability of such devices.
6 May 2016 in IEEE Transactions on Device and Materials Reliability
In this paper, highly repeatable aromatic hydrocarbon [such as benzene (B), toluene (T) and xylene (X) (BTX)] sensing performance of Ti/TiO 2 nanotube (NT) array/Ti sandwiched device structure, in the capacitive mode, is reported. The sensing layer was synthesized via electrochemical route and the capacitive performance of the device, toward organic vapors having low dielectric constant (e.g. BTX), was investigated. For a detection range of 10-200 ppm (at 150 °C), the sensor offered a highly promising performance. TiO 2 NT array, being a highly oriented and freestanding nanostructure, offered sufficient intertubular and intratubular free space, which can be easily filled up by the target gas/vapor species, causing a significant change in the effective dielectric constant and therefore in the resultant capacitance of the sensor device. An equivalent circuit model was developed to demonstrate the underlying mechanistic framework of the capacitive type gas/vapor sensor considering the effects of the external factors, viz., temperature and target vapor concentrations.