Saud I. Al-Resayes

Saud I. Al-Resayes

Auto-generated profile, based on publicly available information

Saud I. Al-Resayes


Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 February 2022 in Polymers
Verified
Journal Article
Open access
PDF file
MAMohammad Azam
Mohammad Azam
Saikh WabaidurSaikh Wabaidur
Saikh Wabaidur
MKMohammad Rizwan Khan
Mohammad Rizwan Khan
SASaud I. Al-Resayes
Saud I. Al-Resayes
MIMohammad Shahidul Islam
Mohammad Shahidul Islam
In the current study we prepared cost-effective adsorbents based on ajwa date pits to remove Cu(II) ions from aqueous medium. Adsorbents were studied using scanning electron microscopy (SEM), FT-IR, and Brunauer-Emmett-Teller (BET) methods to characterize the surface functionalities, morphology, pore size, and particle size. The concentration of Cu(II) ions in the studied samples was determined by atomic adsorption spectrometry technique (AAS). Adsorption method was performed sequentially in a batch system followed by optimization by studying the numerous conditions, for instance the initial amounts of Cu(II) ions, dosages of the adsorbent, contact time, and pH of the solution. The ideal pH observed for maximum adsorption capacity was ~6.5. Langmuir and Freundlich isotherm models correctly predicted the investigation results, with the maximum monolayer adsorption capacities for Cu(II) ions at 328 K being 1428.57 mg/g (treated ajwa date pits, TADP) and 1111.1 mg/g for as produced ajwa date pits (ADP). It was revealed that TADP possess greater adsorption capability than ADP. Recovery investigations revealed that the saturated adsorbents eluted the maximum metal with 0.1 M HCl. Cu(II) ions adsorption was observed to be reduced by 80–89% after the second regeneration cycle. For the raw and chemically processed ajwa date pits adsorbent, the Langmuir model performed significantly better than the Freundlich model. The results demonstrated that the adsorbent made from ajwa date pits could be an economical and environmentally friendly alternative for removing Cu(II) ion pollutant from aqueous media.

2 April 2018 in Molecules
Verified
Journal Article
Open access
PDF file
MAMohammad Azam
Mohammad Azam
SASaud I. Al-Resayes
Saud I. Al-Resayes
Saikh WabaidurSaikh Wabaidur
Saikh Wabaidur
MAMohammad Altaf
Mohammad Altaf
BCBHASKAR CHAURASIA
BHASKAR CHAURASIA
SPSoonheum Park
Soonheum Park
We are reporting a novel azo-azomethine ligand, HL and its complexes with Cu(II) and Fe(III) ions. The ligand and its complexes are characterized by various physico-chemical techniques using C,H,N analyses, FT-IR, 1H-NMR, ESI-MS and UV-Vis studies. TGA analyses reveal complexes are sufficiently stable and undergo two-step degradation processes. The redox behavior of the complexes was evaluated by cyclic voltammetry. Furthermore, the ligand and its complexes were tested for antimicrobial activity against bacterial and fungal strains by determining inhibition zone, minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC). The complexes showed moderate antimicrobial activity when tested against Gram +ve and Gram −ve bacterial strains. To obtain insights into the structure of ligand, DFT studies are recorded. The results obtained are quite close to the experimental results. In addition, the energy gap, chemical hardness, softness, electronegativity, electrophilic index and chemical potential were calculated using HOMO, LUMO energy value of ligand.

5 February 2021 in Molecules
Verified
Journal Article
Open access
PDF file
PMP. Manimaran
P. Manimaran
SBS Balasubramaniyan
S Balasubramaniyan
MAMohammad Azam
Mohammad Azam
DRD. Rajadurai
D. Rajadurai
SASaud I. Al-Resayes
Saud I. Al-Resayes
IKImran Khan
Imran Khan
2,4-Dinitrophynylhydrazine and two thiocyanate ions in a (M:L1:L2) 1:2:2 molar ratio was synthesized in the complexes of Co(II) and Ni(II). The prepared compounds were identified through a C.H.N.S. analysis, conductivity measurements, powder X-ray diffraction (PXRD), the infrared spectrum, and a UV-visible spectrum analysis, in addition to the magnetic properties being measured. The measurements of the molar conductance implieda nonelectrolytic nature of compounds Co(II) and Ni(II). The magnetic susceptibility, as well as electronic spectra, represented all the metal complexesthroughoctahedral geometry, respectively. The PXRD patterns suggested that all the complexes were an orthorhombic system with unit cell parameters. The in-vitro biological activity of the ligand and the metal complexes were screened against the Gram-positive and negative pathogenic bacteria Staphylococcus aureus, Bacillus subtilis, Pseudomonas, aeruginosa and Escherichia coli, as well as the fungal species of Aspergillusniger and Candida albicans.Thus, the metal complexes showeda high efficiency of antimicrobial activity compared with the ligand. Furthermore, applications of the ligand, as well as the metal complexes, were tested for in-vitro antioxidant potential in aDPPH assay. The results showed that the activity of the metal complexes with the in-vitro antioxidant was more active than that of 2,4-dinitrophenylhydrazine(DNPH).

12 November 2021 in Catalysts
Verified
Journal Article
Open access
PDF file
SASirine Ben Ayed
Sirine Ben Ayed
MAMohammad Azam
Mohammad Azam
SASaud I. Al-Resayes
Saud I. Al-Resayes
AFAyari Fadhila
Ayari Fadhila
Luigi RizzoLuigi Rizzo
Luigi Rizzo
A photo-Fenton process using a local iron oxide as a natural catalyst was compared to Fenton and UV/H2O2 advanced oxidation processes for degrading crystal violet (CV) dye in aqueous solutions. The catalyst was characterized by transmission electron microscopy (TEM), energy dispersive X-ray microanalysis (EDX), Fourier transform infrared spectroscopy (FT-IR), Raman spectrum, X-ray diffraction (XRD), UV-vis spectroscopy, and Brunauer–Emmett–Teller (BET) analysis. The optical properties proved that the catalyst represents a good candidate for photocatalytic activity. The impact of different parameters (catalyst dose, initial CV concentration, initial H2O2 concentration, pH) on the photo-Fenton efficiency was evaluated. A photo-Fenton process operated under UVC light irradiation, at spontaneous pH, with 1.0 g/L of catalyst and 30 mg/L of H2O2 was the most effective process, resulting in 98% CV dye removal within 3 h. LC-MS and ion-chromatography techniques were used to identify demethylated organic intermediates during the process. Furthermore, a regeneration study of the catalyst showed its stability and reusability (after three treatment cycles, CV dye degradation decreased from 94% to 83%). Finally, the photo-Fenton process was tested in the treatment of real textile wastewater, and the effluent was found to be in compliance with standards for industrial wastewater disposal into sewerage.

18 June 2021 in Molecules
Verified
Journal Article
Open access
PDF file
MAMohammad Azam
Mohammad Azam
Saikh WabaidurSaikh Wabaidur
Saikh Wabaidur
MKMohammad Rizwan Khan
Mohammad Rizwan Khan
SASaud I. Al-Resayes
Saud I. Al-Resayes
MIMohammad Shahidul Islam
Mohammad Shahidul Islam
The aim of the research was to prepare low-cost adsorbents, including raw date pits and chemically treated date pits, and to apply these materials to investigate the adsorption behavior of Cr(III) and Cd(II) ions from wastewater. The prepared materials were characterized using SEM, FT-IR and BET surface analysis techniques for investigating the surface morphology, particle size, pore size and surface functionalities of the materials. A series of adsorption processes was conducted in a batch system and optimized by investigating various parameters such as solution pH, contact time, initial metal concentrations and adsorbent dosage. The optimum pH for achieving maximum adsorption capacity was found to be approximately 7.8. The determination of metal ions was conducted using atomic adsorption spectrometry. The experimental results were fitted using isotherm Langmuir and Freundlich equations, and maximum monolayer adsorption capacities for Cr(III) and Cd(II) at 323 K were 1428.5 and 1302.0 mg/g (treated majdool date pits adsorbent) and 1228.5 and 1182.0 mg/g (treated sagai date pits adsorbent), respectively. It was found that the adsorption capacity of H2O2-treated date pits was higher than that of untreated DP. Recovery studies showed maximal metal elution with 0.1 M HCl for all the adsorbents. An 83.3–88.2% and 81.8–86.8% drop in Cr(III) and Cd(II) adsorption, respectively, were found after the five regeneration cycles. The results showed that the Langmuir model gave slightly better results than the Freundlich model for the untreated and treated date pits. Hence, the results demonstrated that the prepared materials could be a low-cost and eco-friendly choice for the remediation of Cr(III) and Cd(II) contaminants from an aqueous solution.

11 March 2022 in Crystals
Verified
Journal Article
Open access
PDF file
MPMehtab Parveen
Mehtab Parveen
MAMohammad Azeem
Mohammad Azeem
AAAfroz Aslam
Afroz Aslam
MAMohammad Azam
Mohammad Azam
SSSharmin Siddiqui
Sharmin Siddiqui
Mahboob AlamMahboob Alam
Mahboob Alam
4,6-Diacetylresorcinol (1) and 3-O-methylellagic acid dihydrate (2), both biologically significant compounds, were extracted from Bixa orellana and studied using IR, 1H, and 13C NMR, and UV-vis spectroscopic techniques. X-ray crystallographic techniques were also used to establish the molecular structure of the isolated compounds 1 and 2. Geometric parameters, vibrational frequencies, and gauge including atomic orbital (GIAO) 1H and 13C NMR of 1 and 2 in the ground state were computed by the density functional theory (DFT) using B3LYP/6-311G(d,p) basis set backing up experimental studies and established the correct structure of isolated compounds. The parameters obtained from the combined DFT, and X-ray diffraction studies are mutually agreed to establish correct structures of 1 and 2. In addition, an electrostatic potential map and HOMO−LUMO energy gap were made using the DFT calculation to determine the distribution of energy and the chemical reactivity region of the isolated compounds. The current study also provides further insights into the interaction of compound 2 with ct-DNA using numerous biophysical and in silico techniques. Moreover, in silico studies indicate that compound 2 binds to the DNA in the minor groove. Lipinski’s rule of five revealed a higher tendency of compound 2 towards drug-likeness. The bioavailability and synthetic accessibility score for compound 2 was found to be 0.55 and 3.21, suggesting that compound 2 could serve as an effective therapeutic candidate.