AC induction motors and permanent magnet synchronous drives became very popular for motion control applications due to their simple and reliable construction. Sensorless drive control is required in many applications to reduce drive production costs. While many approaches to magnetic flux, rotor speed, or other quantities needed to control electrical machine were proposed, conditions under which these quantities can be estimated are not often sufficiently investigated. In this paper, induction machine and permanent-magnet-synchronous-machine drive state observability analysis is presented, together with conditions allowing reliable rotor speed and position estimation. A method based on the nonlinear dynamical system state observability theory is proposed, resulting in a unified approach to the ac drive observability analysis.
25 February 2020 in IEEE Transactions on Industrial Electronics
The synchronous reluctance motor is becoming a very attractive alternative to the AC induction machine. This is due to the lack of rare-earth metals in their construction and a higher efficiency, which was brought about by recent progress in rotor design. However, in order to achieve an efficient and low-cost operation of the synchronous reluctance motor drive, an adaptive sensorless algorithm should be utilized to cope with machine non-linearities. This paper describes an adaptive observer, which can provide an estimation of rotor position and speed, as well as core loss and inductance parameters. A modified PWM switching scheme and a current derivative measurement method are proposed, together with an extended Kalman Filter design. Experimental results are shown to demonstrate method performance and feasibility.
6 February 2006 in IEEE Transactions on Industrial Electronics
AC induction motors have become very popular for motion-control applications due to their simple and reliable construction. Control of drives based on ac induction motors is a quite complex task. Provided the vector-control algorithm is used, not only the rotor speed but also the position of the magnetic flux inside the motor during the control process should be known. In most applications, the flux sensors are omitted and the magnetic-flux phasor position has to be calculated. However, there are also applications in which even speed sensors should be omitted. In such a situation, the task of state reconstruction can be solved only from voltage and current measurements. In the current paper, a method based on deterministic evaluation of measurement using the state observer based on the Lyapunov function is presented. The method has been proven in testing on a real ac induction machine.
The paper deals with the analytical solution of the maximum torque per flux strategy for interior permanent magnet synchronous machine. The paper describes in detail, how to compute proper values of stator current components to be able to control the drive in a wide speed range. The developed flux weakening algorithm can be easily adapted to the controlled drive using its actual identified parameters. The algorithm was proved in simulation using a real PMSM control system.
Drives based on permanent magnet synchronous machines become more and more popular in many industrial applications. In most high-performance applications classical vector control is currently used. While this control method is usually reliable it has some limitations especially in controllers tuning and constraints handling. New control methods like Model Predictive Control become feasible in connection with increasing computational power of controller hardware. The paper deals with enhanced discrete time PMSM model which can be used for efficient predictive control implementation. The other objective of the paper is discussion of prediction horizon length impact on the drive control performance.