25 April 2016 in IEEE Transactions on Industrial Electronics
Permanent-magnet synchronous machine (PMSM) drives have become popular for motion control applications due to their performance and high torque-to-weight ratio. The complex task of PMSM control in high-performance applications is currently usually resolved with classical vector control. Modern control techniques such as model predictive control (MPC) can provide significant benefits over field-oriented control, especially with straightforward controller tuning and constraints handling. Unfortunately, these new algorithms usually suffer from problems with their computational complexity. In this paper, we present a PMSM control method based on an explicit MPC with a novel linearization and constraints handling method, allowing natural field weakening. The algorithm was designed with respect to computationally feasible implementation in the control hardware. The proposed control algorithm has been proved and successfully verified in both simulation and implementation on a real motor.
8 June 2012 in IEEE Transactions on Industrial Electronics
AC induction motors and permanent magnet synchronous drives became very popular for motion control applications due to their simple and reliable construction. Sensorless drive control is required in many applications to reduce drive production costs. While many approaches to magnetic flux, rotor speed, or other quantities needed to control electrical machine were proposed, conditions under which these quantities can be estimated are not often sufficiently investigated. In this paper, induction machine and permanent-magnet-synchronous-machine drive state observability analysis is presented, together with conditions allowing reliable rotor speed and position estimation. A method based on the nonlinear dynamical system state observability theory is proposed, resulting in a unified approach to the ac drive observability analysis.
25 February 2020 in IEEE Transactions on Industrial Electronics
The synchronous reluctance motor is becoming a very attractive alternative to the AC induction machine. This is due to the lack of rare-earth metals in their construction and a higher efficiency, which was brought about by recent progress in rotor design. However, in order to achieve an efficient and low-cost operation of the synchronous reluctance motor drive, an adaptive sensorless algorithm should be utilized to cope with machine non-linearities. This paper describes an adaptive observer, which can provide an estimation of rotor position and speed, as well as core loss and inductance parameters. A modified PWM switching scheme and a current derivative measurement method are proposed, together with an extended Kalman Filter design. Experimental results are shown to demonstrate method performance and feasibility.
6 February 2006 in IEEE Transactions on Industrial Electronics
AC induction motors have become very popular for motion-control applications due to their simple and reliable construction. Control of drives based on ac induction motors is a quite complex task. Provided the vector-control algorithm is used, not only the rotor speed but also the position of the magnetic flux inside the motor during the control process should be known. In most applications, the flux sensors are omitted and the magnetic-flux phasor position has to be calculated. However, there are also applications in which even speed sensors should be omitted. In such a situation, the task of state reconstruction can be solved only from voltage and current measurements. In the current paper, a method based on deterministic evaluation of measurement using the state observer based on the Lyapunov function is presented. The method has been proven in testing on a real ac induction machine.
25 January 2021 in IEEE Transactions on Vehicular Technology
This article describes an application of Non-linear Model Predictive Control algorithms on energy efficient control of fully electric vehicle cabin temperature and air quality. Since fully electric vehicles can not utilize waste heat from a powertrain (or there is not enough waste heat) as ICE vehicles do, it is necessary to employ advanced control approaches (especially for cabin heating) due to the possible mileage lost by using energy from the batteries for cabin conditioning. The basic idea behind this is to avoid the heat losses caused by excessive air exchange and to ensure a satisfactory air quality in combination with a user defined temperature. The Non-linear Model Predictive control algorithms were successfully implemented into an Infineon AURIX Tricore microcontroller and tested within a Processor in the Loop simulation.