The current work presents a novel microfluidic approach, allowing a full separation of blood cells. The approach relies on using a polydimethylsiloxane serpentine microchannel equipped with a series of electrodes, providing two separation zones. The proposed design exploits the unique configuration of the channel along with the inherent difference in dielectric properties of the three kinds of blood cells to achieve a size-based sorting. The platelets (PLTs) are subjected to a larger dielectrophoretic force than red blood cells (RBCs) and white blood cells (WBCs), forcing them to be separated in the first zone. This leaves RBCs and WBCs to be separated in the second zone. The model developed in this work has been used intensively to examine the feasibility of the proposed approach. The model results showed a full separation of blood content can be achieved over a range of phase flow rates and AC frequencies.

A MATLAB program was developed to simulate urethane-forming reactions by solving over a dozen differential equations, energy balance, mass balance, and constitutive equations simultaneously. The simulation program was developed for half a decade to simulate the basic kinetics of polyurethane reactions and more complex phenomena that cannot be obtained in laboratories. In the current investigation, the simulation is applied to determine the limits of the performance of polyurethane foam formation. n-pentane, cyclohexane, and methyl formate were used as physical blowing agents, and water was used as a chemical blowing agent. The simulation code increases the accuracy of the results and makes the foam performance process less time- and money-consuming. Specifically, the MATLAB code was developed to study the impact of physical and chemical blowing agents at different loadings on the performance of rigid polyurethane foams. Experimental data were used to validate the simulation results, including temperature profiles, height profiles, and the tack-free time of urethane foam reactions. The simulation results provide a window for the proper type and the optimum amount range of different physical and chemical blowing agents.