The anaerobic digestion, AD, process presents a solution for sustainable waste management, greenhouse gas mitigation and energy production for growing population needs and requirements. Adopting a biorefinery approach that utilises different feedstock may enhance energy production and support optimisation of the anaerobic digestion process. Algae is a promising feedstock that could be used for energy production via the anaerobic digestion process. Microalgal biomass is rich in carbohydrates and lipids; however, many species of algae exhibit tough cell walls that could also be difficult to digest and may influence or inhibit the efficiency of the AD process. This study concentrated on the comparison of AD remediation of two marine algal biomass species, Tetraselmis suecica and Nannochloropsis oceanica. The two species were pre-treated with an ultrasound technique and compared for their methane production using biochemical methane potential tests. For Tetraselmis, a specific methane production of 0.165 LCH4/KgVS was observed; however, for Nannochloropsis, a value of 0.101 LCH4/KgVS was observed for the samples treated with ultrasound. The BMP results from this study show that among the two micro-algae species tested, Tetraselmis suecica is found to be a better substrate for methane production potential. Contrary to increasing the specific methane production, ultrasound cavitation caused a slight decrease in the specific methane production values for both Nannochloropsis oceanica and Tetraselmis suecica biomass residues. The pre-treatment of the biomass using ultrasound techniques provided comparable results and can be recommended for effective bioenergy production. However, further research is required for the optimisation of the pre-treatment of microalgae and for the integration of microalgal biorefineries for circular economy.
Indonesia has abundant oil palm empty fruit bunches (OPEFBs). However, high lignin content in OPEFBs may hinder their valorisation to bioenergy resources, as its degradation by microorganisms is rate-limiting. This paper aims to review OPEFB as feedstock in anaerobic digestion (AD) systems and sustainable strategies to enhance methane yield. This paper provides a comprehensive review of the availability of OPEFB, the prospective of AD technology, and compares various biological pre-treatment and co-digestion strategies for superior AD process. Improving the value-added benefits from OPEFBs and simultaneously making pre-treatment processes more sustainable is critical to wider application. Several scenarios were proposed by combining multi-stage pre-treatment of physical and mushroom cultivation pre-treatment prior to AD. This paper presents an original approach to establishing a commercially viable and sustainable AD of OPEFBs in Indonesia by integrating multi-product biorefinery and a circular economy. Further investigation is required to ensure cost-effective and eco-friendly configurations. Abbreviations: ABR: Anaerobic Baffled Reactor; AD: Anaerobic Digestion; AF: Anaerobic Filter; AFEX: Ammonia Fibre Expansion; AI: Artificial Intelligence; AnMBR: Anaerobic Membrane Bioreactor; ANN: Artificial Neural Network; ASP: Activated Sludge Process; CMM: Cattle Manure and Maize Silage; COD: Chemical Oxygen Demand; CPO: Crude Palm Oil; CPW: Cocoa Pods Waste; CSTR: Continuous Stirred-Tank Reactor; DH: Dry Husk; DM: Dry Matter; DMF: 2,5-dimethylfuran; EM: Effective Microorganisms; EGSB: Expanded Granular Sludge Bed; FBR: Fluidised Bed Reactors; FFB: Fresh Fruit Bunch; FTIR: Fourier-Transform Infrared Spectroscopy; GHG: Greenhouse Gasses; HRT: Hydraulic Retention Time; IC: Internal Circulation Reactor; IoT: Internet of Things; Lac: Laccase Enzyme; L-AD: Liquid-AD; LiP: Lignin Peroxidase; LRAD: Low-Rate AD; MARS: Multivariate Adaptive Regression Splines; MCC: Microcrystalline Cellulose; MDF: Medium-Density Fibreboard; MEMR: Ministry of Energy and Mineral Resources, Republic of Indonesia; ML: Machine Learning; MnP: Manganese Peroxidase; MPA: Marine Predators Algorithm; MSW: Municipal Solid Waste; OFMSW: Organic Fraction of Municipal Solid Waste; OLR: Organic Loading Rates; OPEFBs: Oil Palm Empty Fruit Bunches; OPF: Oil Palm Fibre; OPKS: Oil Palm Kernel Shell; OPMF: Oil Palm Mesocarp Fibre; OPT: Oil Palm Trunk; P(3HB): Poly(3-Hydroxybutyrate); PHA: Polyhydroxyalkanoate; PLTBg: Biogas Power Plants; POM: Palm Oil Mill; POME: Palm Oil Mill Effluent; SCG: Spent Coffee Grounds; SRF: Solid Refused Fuel; SRT: Solids Retention Time; SS-AD: Solid-State AD; TS: Total Solid; TSI: Torrefaction Severity Index; UASB: Up-flow Anaerobic Sludge Blanket; VFA: Volatile Fatty Acids; VP: Versatile Peroxide; VS: Volatile Solid; W2E: Waste-to-Energy.
1 January 2016 in International Journal of Environmental Science and Development
Customer lifetime value is a trustworthy customer metric, more so than revenue, as it institutionalizes customer spending over time, aiding in customer retention. Artificial intelligence (AI) stands as the linchpin of every sector today, with its methods yielding exorbitant levels of impact within organizations, catalyzing a paradigm shift in its operations. Despite the concept of AI gaining traction in all other sectors, there still seems to be a gap in its usage in the identification of touchpoints in the customer journey. So, this research aims to address this existing gap and to benefit businesses across various sectors by shedding light on how AI can be effectively used to detect and forecast the key touchpoints that affect customer lifetime value. It will help organizations enrich customer experience, retention, and ultimately their bottom line.