Time-domain back projection (BP) is a widely known method used in Synthetic Aperture Radar (SAR) image formation. Despite its advantages over other image formation algorithms, the BP method is hindered due to its computational complexity and its requirement of higher number of operations and processing power. Recently, Field Programmable Gate Array (FPGA) devices have been used for BP acceleration mainly due to their parallel processing capabilities, reconfigurability, scalability, and low power requirement. This paper presents a new Fixed-point based BP (FxBP) design for FPGA devices and a Floating-point based BP (FlBP) design to compare performance. Both designs are developed with N-Dimensional Range (NDR) structure and Single Work Item (SWI) structure using OpenCL. The FPGA performance is evaluated using a FPGA performance metric (FPM). It is shown that FxBP-NDR and FxBP-SWI designs generate high quality back projected images compared to FlBP designs, while saving 16.87% and 42.54% on logic resources and gaining 17.90% and 91.62% on FPGA performance in NDR and SWI, respectively. Obtained results clearly indicate that FPGA devices perform significantly better with FxBP designs compared to FlBP designs, even with hardened FPUs.
Distributed Coherent Radar (DCR) is a distributed MIMO radar concept which holds the potential to significantly improve SNR over single aperture and statistical MIMO systems. DCR achieves coherence in one of two modes: Cohere-On-Transmit which yields an N 3 improvement in SNR (N is the number of radars) but requires ideal coherence parameter (CP) information before transmission, and Cohere-On-Receive (COR) which yields an N 2 improvement in SNR but can generally estimate CPs adaptively on reception. System concepts generally make a binary choice between COR and COT operation based on error level. This has lead to multiple studies of coherence parameter error and its impact on performance of each mode. In this work, CP error analysis has been extended to include all three principle coherence parameters (delay, phase, and frequency), as well as simultaneous consideration for the number of radars in the constituent system. This novel analysis reveals significant relationships between number of elements in a system and the resulting error tolerance. A novel DCR operating mode, Mixed Mode DCR (MM-DCR), is introduced which exploits this relationship and achieves N 2+logN(M) SNR gain, where M is the number of elements used for each sub-aperture. MM-DCR is shown to yield better performance than COR and COT under a broad set of error conditions, yielding overall system error tolerance improvements. Moreover, as error varies during system operation, MM-DCR facilitates a graceful performance degradation by varying the size of the sub-apertures.
16 April 2013 in Journal of Real-Time Image Processing
This paper presents a novel implementation of the JPEG2000 standard as a system on a chip (SoC). While most of the research in this field centers on acceleration of the EBCOT Tier I encoder, this work focuses on an embedded solution for EBCOT Tier II. Specifically, this paper proposes using an embedded softcore processor to perform Tier II processing as the back end of an encoding pipeline. The Altera NIOS II processor is chosen for the implementation and is coupled with existing embedded processing modules to realize a fully embedded JPEG2000 encoder. The design is synthesized on a Stratix IV FPGA and is shown to out perform other comparable SoC implementations by 39% in computation time.
In this paper, a new technique called B-plane compression is presented. This technique is used to compress LAS files, producing slightly better overall compression gain than the popular LAZ compression engine. Furthermore, the B-plane compression technique has other advantages. B-plane compression processes each of the ten attributes within the LAS files independently, allowing for parallel processing of LAS files, unlike LAZ which uses the return number and number of return attributes to provide context for compression of X, Y, and intensity attributes. Additionally, B-plane compression processes each attribute in a similar manner, with only minor adjustments to the compression technique for the intensity and return attributes as they are compressed as unsigned integers. All other attributes are compressed with the exact same algorithm. Overall, B-plane compression produces on average 1.48% increased compression gain when compared to LAZ compression for lossless compression of LAS files. Additionally, we introduce a quantization step in the compression of X, Y, Z, and intensity attributes, allowing for lossy compression and large compression gain.
15 November 2019 in EURASIP Journal on Image and Video Processing
In this paper, a synthetic aperture radar (SAR) image formation simulator is used to objectively evaluate the parameter selection within the digital spotlighting process. Specifically, recommendations for the filter type and filter order of the low-pass filters used in the range and azimuth decimation processes within the digital spotlighting algorithm are determined to maximize image quality and minimize computational cost. Results show that a finite impulse response low-pass filter with a Taylor $(\overline {n}=5)$ window applied provides the highest image quality over a wide range of filter orders and decimation factors. Additionally, a linear relationship between filter length and decimation factor is found.