The consideration of millimeter wave (mmWave) bands and ultra-dense deployment have emerged as essential enabling solutions in Fifth Generation (5G) networks. However, these solutions result in a significant surge in the number of handovers (HOs), leading to an increased occurrence of unnecessary handovers and a higher likelihood of dropped connectivity. Hence, designing a robust mobility technique that facilitates seamless connections to the user equipment (UE) has become crucial and challenging. One of the essential HO optimisation techniques is referred to as Mobility Robustness Optimisation (MRO), which focuses on adapting HO Control Parameters (HCPs) such as Hysteresis Margin (HM) and Time-to-Trigger (TTT). While it was originally designed for 4G and subsequently enhanced for 5G, the effectiveness of this functionality requires further refinement to meet the demands of future mobile networks. Existing MROs approaches primarily focus on UE mobility and heavily rely on metrics such as Received Signal Reference Power (RSRP) and Received Signal Reference Quality (RSRQ). However, these approaches tend to overlook critical handover challenges, including the widespread deployment of small cells, which is crucial in 5G mmWave networks, as well as issues related to interference and channel intermittency. This research proposes a Smart Handover Strategy (SHS) mechanism to autonomously fine-tune handover control parameters, including HM and TTT, by utilising real-time channel conditions assessed through the Signal-to-Interference-Noise Ratio (SINR), thereby ensuring precise parameter adjustments. The utilisation of SINR in this proposed mechanism aims to address handover challenges arising from interference, high intermittent, and unpredictable behaviours encountered in 5G mmWave wireless channels. The primary goal of this mechanism is to facilitate seamless handovers as UE transitions from one Base Station (BS) to another in a dual connectivity multi-radio network. The developed algorithm underwent testing using a 5G mmWave statistical channel model that emulates a dynamic channel matrix, including fading and the Doppler effect. The Network Simulator 3 (NS3) software was utilised to analyse and evaluate the performance of the SHS mechanism, specifically in terms of latency and throughput. The simulation results demonstrate the remarkable effectiveness of the SHS mechanism, showcasing a substantial improvement. In comparison to other handover enhancement techniques, the SHS mechanism achieves a notable increase of over 7% (38 Mbps) in PDCP throughput and a significant reduction of more than 56% (1.87 ms) in latency. Notably, when compared to fixed or traditional handover techniques in digital beamforming configurations, the SHS mechanism exhibits an impressive enhancement, with over 15% (80 Mbps) increase in PDCP throughput and a substantial reduction of more than 77% (4.85 ms) in latency.
Fifth Generation (5G) signals using the millimeter wave (mmWave) spectrums are highly vulnerable to blockage due to rapid variations in channel link quality. This can cause the devices or User Equipment (UE) to suffer from connection failure. In a dual connectivity (DC) network, the channel’s intermittency issues were partially solved by maintaining the UE’s connectivity to primary (LTE advanced stations) and secondary (5G mmWave stations) simultaneously. Even though the dual-connected network performs excellently in maintaining connectivity, its performance drops significantly due to the inefficient handover from one 5G mmWave station to another. The situation worsens when UE travels a long distance in a highly dense obstacle environment, which requires multiple ineffective handovers that eventually lead to performance degradation. This research aimed to propose an Adaptive TTT Handover (ATH) mechanism that deals with unpredictable 5G mmWave wireless channel behaviors that are highly intermittent. An adaptive algorithm was developed to automatically adjust the handover control parameters, such as Time-to-Trigger (TTT), based on the current state of channel condition measured by the Signal-to-Interference-Noise Ratio (SINR). The developed algorithm was tested under a 5G mmWave statistical channel model to represent a time-varying channel matrix that includes fading and the Doppler effect. The performance of the proposed handover mechanism was analyzed and evaluated in terms of handover probability, latency, and throughput by using the Network Simulator 3 tool. The comparative simulation result shows that the proposed adaptive handover mechanism performs excellently compared to conventional handovers and other enhancement techniques.
7 June 2023 in International Journal of Interactive Mobile Technologies (iJIM)
The guard tour system helps companies and organizations to monitor their security activities such as protecting people, buildings, assets, or equipment. According to the existing system, the patrolling at each checkpoint is being executed by using RFID-based digital data loggers that records and save all patrolling entries internally. The data will be transferred manually by the guard once the patrolling is completed. In some cases, when there is a problem with the device, the system unable to retrieve the patrolling data that has been already stored in the device. In addition, the current system also not be able to track the guard’s movement, patrolling information, and incidents in real-time basis. The developed Security Guard Patrolling, Monitoring and Reporting (eSmartGuard) system is able incorporates many unique and intelligent technologies such as NFC, GPS and IoT to records and save the patrolling data automatically on the cloud/server in real-time basis. An important value-added feature of the system is real-time incidents notification that able to notify any risk of the guards instantly to the in-charged security officer. Furthermore, through the eSmartGuard, the patrolling information such as time, date, GPS coordinate, guard ID can be monitored and retrieved remotely via proposed Mobile Apps and Web at a convenient time. The eSmartGuard patrolling system is proposed to improve the safety of the people and assets by assisting the security guards to perform their patrolling duty efficiently.
12 March 2026 in Advance Sustainable Science Engineering and Technology
The safety and efficiency of oil and gas pipelines remain critical due to the high risks associated with leaks, pressure surges, and undetected structural damage. WSNs provide an effective solution for real-time monitoring by deploying sensor nodes along the pipeline. However, existing routing protocols such as DSDV and AODV face challenges with congestion, packet loss, and uneven energy consumption in long linear topologies. This study proposes DSDVTRI, a triple-interleaving extension of the DSDV protocol designed to improve data delivery and energy efficiency in linear pipeline networks. Simulations were performed using NS2.35 version across node counts ranging from 20 to 200. The results show that at number of nodes 100, DSDVTRI improves throughput by 14.2% and delivery ratio by 3.05% compared to DSDV, while reducing energy consumption per packet by 6.3%. These findings demonstrate that DSDVTRI enhances performance stability, making it suitable for real-time and energy-efficient pipeline monitoring applications.
In this work, we propose fog-based energy-delay optimization (F-EDO) approach and benchmark its performance against the cloud-based energydelay optimization (C-EDO) method, focusing on energy consumption and delay. Unlike previous studies that optimize energy or delay separately, FEDO minimizes both metrics simultaneously, achieving up to 52.2% energy savings with near-zero delay. Additionally, increasing the number of users also leads to energy savings. This is due to the optimized placement of fog servers at the access layer which reduces network energy consumption compared to C-EDO. F-EDO also significantly reduces delay, with negligible delay compared to C-EDO due to fog servers are placed closer to the users which minimized the transmission distances. Besides, the results also show that the energy saving in F-EDO compared to the C-EDO increased as the processing capacity of the processing server increased while maintaining its minimal delay. Overall, F-EDO proves to be a more energyefficient and lower-delay solution for IoT networks, offering a better alternative to cloud-based offloading.