Ícaro Bezerra Queiroz de Araújo

Prof. Dr. Ícaro Bezerra Queiroz de Araújo

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 May 2021 in Sensors
Verified
Journal Article
Open access
PDF file
GMGustavo Melo
Gustavo Melo
Igor TorresIgor Torres
Igor Torres
ÍAÍcaro Bezerra Queiroz de Araújo
Ícaro Bezerra Queiroz de Araújo
DBDavi Brito
Davi Brito
EBErick de Andrade Barboza
Erick de Andrade Barboza
Monitoring and data acquisition are essential to recognize the renewable resources available on-site, evaluate electrical conversion efficiency, detect failures, and optimize electrical production. Commercial monitoring systems for the photovoltaic system are generally expensive and closed for modifications. This work proposes a low-cost real-time internet of things system for micro and mini photovoltaic generation systems that can monitor continuous voltage, continuous current, alternating power, and seven meteorological variables. The proposed system measures all relevant meteorological variables and directly acquires photovoltaic generation data from the plant (not from the inverter). The system is implemented using open software, connects to the internet without cables, stores data locally and in the cloud, and uses the network time protocol to synchronize the devices’ clocks. To the best of our knowledge, no work reported in the literature presents these features altogether. Furthermore, experiments carried out with the proposed system showed good effectiveness and reliability. This system enables fog and cloud computing in a photovoltaic system, creating a time series measurements data set, enabling the future use of machine learning to create smart photovoltaic systems.

29 May 2019 in Journal of Control, Automation and Electrical Systems
Verified
Journal Article
Closed access
PDF file
ÍAÍcaro Bezerra Queiroz de Araújo
Ícaro Bezerra Queiroz de Araújo
JGJoão Paulo Ferreira Guimarães
João Paulo Ferreira Guimarães
AFAluisio Fontes
Aluisio Fontes
LLLeandro L. S. Linhares
Leandro L. S. Linhares
AMallan martins
allan martins
FAFábio M. U. de Araújo
Fábio M. U. de Araújo

27 April 2024 in Technologies
Verified
Journal Article
Open access
PDF file
EPEmanuel Adler Medeiros Pereira
Emanuel Adler Medeiros Pereira
SJSandoval da Silva Almeida Junior
Sandoval da Silva Almeida Junior
LSLuis Felipe Vieira Silva
Luis Felipe Vieira Silva
MBMateus Batista
Mateus Batista
ESEliel Santos
Eliel Santos
RDRoger Davanso
Roger Davanso
Radio-frequency identification technology finds extensive use in various industrial applications, including those involving metallic surfaces. The integration of radio-frequency identification systems with metal surfaces, such as those found in the automotive sector, presents distinct challenges that can notably affect system efficacy due to metal’s tendency to reflect electromagnetic waves, thus degrading the functionality of conventional radio-frequency identification tags. This highlights the importance of conducting research into academic publications and patents to grasp the current advancements and challenges in this field, aiming to improve the applications of radio-frequency identification tags technology on metal. Consequently, this research undertakes a concise review of both the literature and patents exploring radio-frequency identification technology’s use for on-metal tags, utilizing resources like Google Scholar and Google Patents. The research categorized crucial aspects such as tag flexibility, operating frequency, and geographic origins of the research. Findings highlight China’s prominent role in contributing to metal-focused radio-frequency identification tag research, with a considerable volume of articles and patents. In particular, flexible tags and the Ultra-High Frequency range are dominant in both scholarly and patent documents, reflecting their significance in radio-frequency identification technology applications. The research underscores a vibrant area of development within radio-frequency identification technology, with continued innovation driven by specific industrial needs. Despite the noted advances, the presence of a significant percentage of no longer valid patents suggests substantial opportunities for further research and innovation in radio-frequency identification technology for on-metal applications, especially considering the demand for flexible tags and for solutions in systems that offer specialized characteristics or are tailored for specific uses.

25 January 2023 in Sensors
Verified
Journal Article
Open access
PDF file
CACarlos Torres Andrade
Carlos Torres Andrade
GMGustavo Melo
Gustavo Melo
TVTiago Vieira
Tiago Vieira
ÍAÍcaro Bezerra Queiroz de Araújo
Ícaro Bezerra Queiroz de Araújo
AMallan martins
allan martins
ASAlana Kelly Xavier Santos
Alana Kelly Xavier Santos
The use of models capable of forecasting the production of photovoltaic (PV) energy is essential to guarantee the best possible integration of this energy source into traditional distribution grids. Long Short-Term Memory networks (LSTMs) are commonly used for this purpose, but their use may not be the better option due to their great computational complexity and slower inference and training time. Thus, in this work, we seek to evaluate the use of neural networks MLPs (Multilayer Perceptron), Recurrent Neural Networks (RNNs), and LSTMs, for the forecast of 5 min of photovoltaic energy production. Each iteration of the predictions uses the last 120 min of data collected from the PV system (power, irradiation, and PV cell temperature), measured from 2019 to mid-2022 in Maceió (Brazil). In addition, Bayesian hyperparameters optimization was used to obtain the best of each model and compare them on an equal footing. Results showed that the MLP performs satisfactorily, requiring much less time to train and forecast, indicating that they can be a better option when dealing with a very short-term forecast in specific contexts, for example, in systems with little computational resources.

10 April 2024 in Sensors
Verified
Journal Article
Open access
PDF file
WTWinnie de Lima Torres
Winnie de Lima Torres
LSLilian Giselly Pereira Santos
Lilian Giselly Pereira Santos
GMGustavo Melo
Gustavo Melo
AOAndressa Martins Oliveira
Andressa Martins Oliveira
PNPedro Henrique de Brito Nascimento
Pedro Henrique de Brito Nascimento
ÍAÍcaro Bezerra Queiroz de Araújo
Ícaro Bezerra Queiroz de Araújo
In recent decades, technological advancements have transformed the industry, highlighting the efficiency of automation and safety. The integration of augmented reality (AR) and gesture recognition has emerged as an innovative approach to create interactive environments for industrial equipment. Gesture recognition enhances AR applications by allowing intuitive interactions. This study presents a web-based architecture for the integration of AR and gesture recognition, designed to interact with industrial equipment. Emphasizing hardware-agnostic compatibility, the proposed structure offers an intuitive interaction with equipment control systems through natural gestures. Experimental validation, conducted using Google Glass, demonstrated the practical viability and potential of this approach in industrial operations. The development focused on optimizing the system’s software and implementing techniques such as normalization, clamping, conversion, and filtering to achieve accurate and reliable gesture recognition under different usage conditions. The proposed approach promotes safer and more efficient industrial operations, contributing to research in AR and gesture recognition. Future work will include improving the gesture recognition accuracy, exploring alternative gestures, and expanding the platform integration to improve the user experience.

17 October 2023 in Sensors
Verified
Journal Article
Open access
PDF file
GLGlauber Rodrigues Leite
Glauber Rodrigues Leite
ÍAÍcaro Bezerra Queiroz de Araújo
Ícaro Bezerra Queiroz de Araújo
AMallan martins
allan martins
Some advantages of using cameras as sensor devices on feedback systems are the flexibility of the data it represents, the possibility to extract real-time information, and the fact that it does not require contact to operate. However, in unstructured scenarios, Image-Based Visual Servoing (IBVS) robot tasks are challenging. Camera calibration and robot kinematics can approximate a jacobian that maps the image features space to the robot actuation space, but they can become error-prone or require online changes. Uncalibrated visual servoing (UVS) aims at executing visual servoing tasks without previous camera calibration or through camera model uncertainties. One way to accomplish that is through jacobian identification using environment information in an estimator, such as the Kalman filter. The Kalman filter is optimal with Gaussian noise, but unstructured environments may present target occlusion, reflection, and other characteristics that confuse feature extraction algorithms, generating outliers. This work proposes RMCKF, a correntropy-induced estimator based on the Kalman Filter and the Maximum Correntropy Criterion that can handle non-Gaussian feature extraction noise. Unlike other approaches, we designed RMCKF for particularities in UVS, to deal with independent features, the IBVS control action, and simulated annealing. We designed Monte Carlo experiments to test RMCKF with non-Gaussian Kalman Filter-based techniques. The results showed that the proposed technique could outperform its relatives, especially in impulsive noise scenarios and various starting configurations.