Erick de Andrade Barboza

Dr. Erick de Andrade Barboza

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 May 2021 in Sensors
Verified
Journal Article
Open access
PDF file
GMGustavo Melo
Gustavo Melo
Igor TorresIgor Torres
Igor Torres
ÍAÍcaro Bezerra Queiroz de Araújo
Ícaro Bezerra Queiroz de Araújo
DBDavi Brito
Davi Brito
EBErick de Andrade Barboza
Erick de Andrade Barboza
Monitoring and data acquisition are essential to recognize the renewable resources available on-site, evaluate electrical conversion efficiency, detect failures, and optimize electrical production. Commercial monitoring systems for the photovoltaic system are generally expensive and closed for modifications. This work proposes a low-cost real-time internet of things system for micro and mini photovoltaic generation systems that can monitor continuous voltage, continuous current, alternating power, and seven meteorological variables. The proposed system measures all relevant meteorological variables and directly acquires photovoltaic generation data from the plant (not from the inverter). The system is implemented using open software, connects to the internet without cables, stores data locally and in the cloud, and uses the network time protocol to synchronize the devices’ clocks. To the best of our knowledge, no work reported in the literature presents these features altogether. Furthermore, experiments carried out with the proposed system showed good effectiveness and reliability. This system enables fog and cloud computing in a photovoltaic system, creating a time series measurements data set, enabling the future use of machine learning to create smart photovoltaic systems.

21 November 2023 in IEEE Journal of Radio Frequency Identification
Verified
Journal Article
Open access
EPEmanuel Adler Medeiros Pereira
Emanuel Adler Medeiros Pereira
ÍAÍcaro Araújo
Ícaro Araújo
LSLuís Felipe Vieira Silva
Luís Felipe Vieira Silva
MBMateus Batista
Mateus Batista
SJSandoval da Silva Almeida Junior
Sandoval da Silva Almeida Junior
JNJobson de Araújo Nascimento
Jobson de Araújo Nascimento
The application of animal tracking holds significant importance across diverse economic domains, encompassing sectors including livestock husbandry, agricultural practices, and the conservation of wildlife populations. It aims to track and understand animal behavior, movement patterns, and health status. The predominant use of RFID technology is observed within the domains of logistics, localization, and the tracking of goods. Notably, the application of this technology in the field of animal tracking has experienced a significant surge in popularity in recent years. This paper conducts a systematic literature review focused on understanding how RFID technology is being applied in the field of animal tracking. We have conducted a state-of-the-art research regarding animal tracking solutions in the scientific literature and patents. We have analyzed these solutions targeting which animals are being tracked, which problems are addressed, operating frequency, and whether other technologies are combined with RFID for animal tracking purposes. Among the categories of problems addressed, livestock management emerged as the main area, followed by animal tracking and traceability. Mammals, especially cattle, are the most common type of animal monitored. Considering RFID technology, passive UHF tags appeared more often. Moreover, many works also employed cameras and GPS together with RFID. Finally, this work can significantly contribute to this field by systematically presenting a state-of-the-art application of RFID for animal tracking.

27 April 2024 in Technologies
Verified
Journal Article
Open access
PDF file
EPEmanuel Adler Medeiros Pereira
Emanuel Adler Medeiros Pereira
SJSandoval da Silva Almeida Junior
Sandoval da Silva Almeida Junior
LSLuis Felipe Vieira Silva
Luis Felipe Vieira Silva
MBMateus Batista
Mateus Batista
ESEliel Santos
Eliel Santos
RDRoger Davanso
Roger Davanso
Radio-frequency identification technology finds extensive use in various industrial applications, including those involving metallic surfaces. The integration of radio-frequency identification systems with metal surfaces, such as those found in the automotive sector, presents distinct challenges that can notably affect system efficacy due to metal’s tendency to reflect electromagnetic waves, thus degrading the functionality of conventional radio-frequency identification tags. This highlights the importance of conducting research into academic publications and patents to grasp the current advancements and challenges in this field, aiming to improve the applications of radio-frequency identification tags technology on metal. Consequently, this research undertakes a concise review of both the literature and patents exploring radio-frequency identification technology’s use for on-metal tags, utilizing resources like Google Scholar and Google Patents. The research categorized crucial aspects such as tag flexibility, operating frequency, and geographic origins of the research. Findings highlight China’s prominent role in contributing to metal-focused radio-frequency identification tag research, with a considerable volume of articles and patents. In particular, flexible tags and the Ultra-High Frequency range are dominant in both scholarly and patent documents, reflecting their significance in radio-frequency identification technology applications. The research underscores a vibrant area of development within radio-frequency identification technology, with continued innovation driven by specific industrial needs. Despite the noted advances, the presence of a significant percentage of no longer valid patents suggests substantial opportunities for further research and innovation in radio-frequency identification technology for on-metal applications, especially considering the demand for flexible tags and for solutions in systems that offer specialized characteristics or are tailored for specific uses.

4 April 2019 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
EBErick de Andrade Barboza
Erick de Andrade Barboza
Carmelo José Albanez Bastos-FilhoCarmelo José Albanez Bastos-Filho
Carmelo José Albanez Bastos-Filho
JFJoaquim F. Martins Filho
Joaquim F. Martins Filho
One of the challenges concerning dynamic optical networks is to increase the level of network automation to allow capabilities devoid of any human intervention. The adaptive control of optical amplifiers operating point (ACOP) is an effort to enable the network control and management to have “plug-and-play” capabilities. ACOP approaches aim to autonomously define the gain of the amplifier after changes in the amplifier input power. The straight-forward implementation of ACOP approaches is as an application running above a software-defined network controller. Some ACOP approaches were recently proposed, and the latest approaches can define the gains minimizing both the linear and nonlinear interference in the optical signal. Nevertheless, these proposed approaches only use the information concerning the individual amplifier conditions to select its gain. In this paper, we propose a novel approach to minimize the nonlinear interference (NLI) impact in ACOP approaches by considering the use of a VOA in the output of each amplifier deployed in an optical link. Moreover, we propose a new global ACOP approach based on multi-objective optimization that can define both the gains of the amplifiers and the losses of the VOAs, aiming to maximize the OSNR and minimize the OSNR ripple of the entire link considering the NLI. The results showed that the proper deployment of the VOA increases the number of solutions with good quality of transmission and that this consideration is more beneficial in the cases where the amplifiers in the link are operating in points with high noise figure. The results showed that the proposed global ACOP approach returns better solutions than the state-of-the-art ACOP approaches considering two commercial amplifier models.

16 February 2018 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
EBErick de Andrade Barboza
Erick de Andrade Barboza
MSMarcionilo J. da Silva
Marcionilo J. da Silva
LCLeonardo D. Coelho
Leonardo D. Coelho
Carmelo José Albanez Bastos-FilhoCarmelo José Albanez Bastos-Filho
Carmelo José Albanez Bastos-Filho
JFJoaquim F. Martins Filho
Joaquim F. Martins Filho
The adaptive control of operating point (ACOP) of optical amplifiers is a significant challenge in the dynamic optical networks. The ACOP approaches aim to autonomously define the gain of the amplifier after the occurrence of changes in the input power of these devices. These changes are frequent and unpredictable in dynamic optical networks, and they can drive the amplifier to operate adding more noise and increasing the signal distortion. Many approaches have been recently proposed, but they have been assessed in simplified scenarios, e.g., disregarding non-linearities. In this letter, we present a more accurate evaluation of the ACOP approaches by using a Gaussian-noise model for the non-linear interference (NLI). Moreover, we propose modifications in some ACOP approaches to consider NLI in the adaptation process. The results show that approaches which can achieve good results in a more straightforward amplifier noise-based model are very impacted concerning performance issues.

22 September 2020 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
EBErick de Andrade Barboza
Erick de Andrade Barboza
ASAllan Amaro Bezerra da Silva
Allan Amaro Bezerra da Silva
JFJosé Carlos Pinheiro Filho
José Carlos Pinheiro Filho
MSMarcionilo José da Silva
Marcionilo José da Silva
Carmelo José Albanez Bastos-FilhoCarmelo José Albanez Bastos-Filho
Carmelo José Albanez Bastos-Filho
JMJoaquim Ferreira Martins-Filho
Joaquim Ferreira Martins-Filho
Optical communication systems are facing the challenge to become robust to dynamic operating conditions. One of the major requirements for this regards the ability of optical devices to become autonomous. Another critical issue regards the development of accurate models for the devices to be appropriately used during the planning phase. Optical amplifiers are essential devices for establishing optical communication systems with good quality of transmission. However, Optical amplifiers often include noise and present a non-flat spectral response. As a consequence, simple regression methods are not suitable for modeling amplifier response. The amplifier output signal estimation has been studied in other works. However, all the previous works only use characterization data with a flat input signal power spectrum, which can decrease the accuracy of the previous estimators when the amplifiers are under real-world conditions. In this work, we proposed models based on an artificial neural network to estimate the optical amplifier output signal considering characterization data with non-flat signals. The results show that the previous models, proposed for flat characterization, do not perform well with non-flat data. The results obtained by the new models are promising since they returned a smaller estimation error than the previous models. We observed an error reduction of 12 dB when compared with the previous models under certain circumstances. Moreover, the proposed models are robust even when we use limited non-flat data in the training process.