This paper proposes a scheme and design of a cryogenic multiplexing control chip (MCC), which enables one microwave cable to control many superconducting qubits. Designed based on an adjustable inductor, the MCC is a nonreciprocal device that generates microwave signals between 4 and 8 GHz and constructs a control circuit to operate qubits. The effects of filters, isolators, power splitters, qubits, and load impedance on the MCC are analyzed in the frequency-domain simulation. And in the time-domain simulation, the response time, Gaussian pulses, single sideband, amplitude, and frequency compensation of the MCC are examined. The MCC can be integrated with the superconducting qubits on the same package at the 20-mK temperature stage with insertion loss of dB and isolation of dB. The time-domain simulation has revealed that the output specific microwave pulses of the MCC can be used for driving the superconducting qubits with crosstalk of about dB. This is much less than dB of the physical requirements on crosstalk, which can meet fidelity on single-qubit (99.92%) and two-qubit gates (99.40%). The power dissipation for each qubit control is less than 1 pW. The MCC can greatly reduce the number of microwave control lines and is beneficial to the development of a large-scale superconducting quantum processor.
10 January 2022 in Journal of Superconductivity and Novel Magnetism
This work presents an analysis of a flux-pumped Josephson parametric amplifier (JPA) with a detailed superconducting quantum interference device (SQUID) model, using the harmonic balance (HB) method in Keysight’s Advanced Design System. The model is built using the generalized resistively shunted junction model of a Josephson junction and the quantization condition of a SQUID, incorporating the effects of the geometric inductance and parasitic parameters. This approach is used to simulate the behavior of an unmatched lumped element JPA and an impedance-matched JPA, showing the necessity of the detailed SQUID model for the simulation of a broadband JPA by comparison with the results based on a widely used, simplified model. Gain profiles obtained from the approach are consistent with existing experiments in the literature, with reasonable accuracy. Due to the HB method, the simulation is of high efficiency, making it feasible to sweep and optimize parameters. This provides a useful method for the analysis of Josephson parametric amplification and the design of a JPA.
22 November 2022 in Quantum Information Processing
This work generalizes Shor’s algorithm into quasi-Shor algorithms by replacing the modular exponentiation with alternative unitary operations. By using the quantum circuits to generate Bell states as the unitary operations, a specific example called the Bell–Shor algorithm was constructed. The system density matrices in the quantum circuits with four distinct input states were calculated in ideal conditions and illustrated through chromatic graphs to witness the evolution of quantum states in the quantum circuits. For the real part of the density matrices, it was revealed that the number of zero elements dramatically declined to only a few points after the operation of the inverse quantum Fourier transformation. Based on this property, a protocol constituting a pair of error metrics and is proposed for the global benchmarking of universal quantum processors by looking at the locations of the zero entries and normalized average values of non-zero entries. The protocol has polynomial resource requirements with the scale of the quantum processor. The Bell–Shor algorithm is capable of being a feasible setting for the global benchmarking of universal quantum processors.
Superconducting circuit quantum electrodynamics is the main architecture for implementation of quantum processors. This work presents a proposal to miniaturize quantum memory devices by combining the quantum memory qubits encoded directly in the first two Fock states and the bus channel in the same specially designed multimode cavity. One key feature of the resonant modes used for quantum memory is that the microwave current is localized, which facilitates the storage and retrieval of information in superconducting qubits while preventing crosstalk from other resonant modes. Frequency design and distinct coupling strengths in this kind of device are analyzed with electromagnetic simulations and numerical calculations. The quantum memory properties, e.g., storage speed, fidelity, and stability, are examined in four cases: (1) memory operation of single-qubit state, (2) disturbing effects, (3) coupling operation, and (4) entangled states storage. Decoherence time of the quantum processor can be extended to more than one order of magnitude longer than that without the memory. By integrating transmons with optimally designed coplanar waveguide multimode quantum memories, the present study could provide an optimistic perspective for the development of large-scale superconducting quantum processors.