This work presents an analysis of a flux-pumped Josephson parametric amplifier (JPA) with a detailed superconducting quantum interference device (SQUID) model, using the harmonic balance (HB) method in Keysight’s Advanced Design System. The model is built using the generalized resistively shunted junction model of a Josephson junction and the quantization condition of a SQUID, incorporating the effects of the geometric inductance and parasitic parameters. This approach is used to simulate the behavior of an unmatched lumped element JPA and an impedance-matched JPA, showing the necessity of the detailed SQUID model for the simulation of a broadband JPA by comparison with the results based on a widely used, simplified model. Gain profiles obtained from the approach are consistent with existing experiments in the literature, with reasonable accuracy. Due to the HB method, the simulation is of high efficiency, making it feasible to sweep and optimize parameters. This provides a useful method for the analysis of Josephson parametric amplification and the design of a JPA.
This work proposes a graphical impedance-matching method for superconducting parametric amplifiers with quantum-limited noise performance using a modified Smith chart. It enables one to quickly apply the impedance-matching methods in microwave engineering to the design of parametric amplifiers. When the matching networks are composed of resonators and their equivalents, the matching of a parametric amplifier can be reduced to that of a negative-resistance amplifier, which is generally invalid due to the connection between the signal-frequency and idler-frequency networks introduced by the parametrically modulated component. Several examples are presented to demonstrate the effective and efficient matching of parametric amplifiers using this method, circumventing the need for complex calculations. This method also offers intuitive insight into how variations in pump strength and bias affect the amplification behavior of the circuit, which is useful in characterizing the parametric amplifier and finding the optimal operating state.
22 November 2022 in Quantum Information Processing
Superconducting circuit quantum electrodynamics is the main architecture for implementation of quantum processors. This work presents a proposal to miniaturize quantum memory devices by combining the quantum memory qubits encoded directly in the first two Fock states and the bus channel in the same specially designed multimode cavity. One key feature of the resonant modes used for quantum memory is that the microwave current is localized, which facilitates the storage and retrieval of information in superconducting qubits while preventing crosstalk from other resonant modes. Frequency design and distinct coupling strengths in this kind of device are analyzed with electromagnetic simulations and numerical calculations. The quantum memory properties, e.g., storage speed, fidelity, and stability, are examined in four cases: (1) memory operation of single-qubit state, (2) disturbing effects, (3) coupling operation, and (4) entangled states storage. Decoherence time of the quantum processor can be extended to more than one order of magnitude longer than that without the memory. By integrating transmons with optimally designed coplanar waveguide multimode quantum memories, the present study could provide an optimistic perspective for the development of large-scale superconducting quantum processors.
This work generalizes Shor’s algorithm into quasi-Shor algorithms by replacing the modular exponentiation with alternative unitary operations. By using the quantum circuits to generate Bell states as the unitary operations, a specific example called the Bell–Shor algorithm was constructed. The system density matrices in the quantum circuits with four distinct input states were calculated in ideal conditions and illustrated through chromatic graphs to witness the evolution of quantum states in the quantum circuits. For the real part of the density matrices, it was revealed that the number of zero elements dramatically declined to only a few points after the operation of the inverse quantum Fourier transformation. Based on this property, a protocol constituting a pair of error metrics and is proposed for the global benchmarking of universal quantum processors by looking at the locations of the zero entries and normalized average values of non-zero entries. The protocol has polynomial resource requirements with the scale of the quantum processor. The Bell–Shor algorithm is capable of being a feasible setting for the global benchmarking of universal quantum processors.
In this work, a parity-time -symmetric system is investigated based on superconducting circuits, which allows the tunability of atom-atom coupling using superconducting qubits. The calculation results demonstrate that the interaction between artificial atoms significantly impacts the transmission spectrum and the conditions of the phase transition in the system. When introducing a weak probe signal into the -symmetric system, several findings are observed. (1) The symmetry and intensity of both the linear and nonlinear outputs can be fine-tuned by adjusting the coupling strength between artificial atoms or manipulating the gauge-invariant phase in the system. (2) Nonreciprocal transmission can be achieved by driving different cavity modes. (3) The exceptional point (EP) of the phase transition can be adjusted within a certain range by modifying the gauge-invariant phase or adjusting the coupling strength in the system. One feasible experimental setup is also described and analyzed based on existing experimental techniques. These findings may inspire further research into modulating quantum phase transitions based on superconducting circuits.