The effect of the new bioproduct in the form of granulate and liquid concentrate on PLA biodegradation during industrial composting was investigated. The analysis included compost parameters, PLA mass loss, structural changes (SEM) and chemical properties (FTIR-ATR, O/C ratio). The effectiveness of the bioproduct, especially in liquid form, in accelerating PLA degradation and improvingcompost properties was confirmed what matters for sustainable waste management.
In this work, the physicomechanical, chemical and thermal properties of low-density polyethylene (LDPE) modified with a biocide containing metal nanoparticles: nanoAg, nanoCu, and nanoFe2O3 were examined. The presented studies, apart from the previously proven antimicrobial effectiveness, have shown that the application of the biocide in concentrations of 0.5% and 1% has the least influence on the remaining properties. In the remaining concentrations (2–5%), despite the lack of significant influence on the chemical structure, the biocide primarily influenced the strength properties and melt flow rate (MFR). Previous research showed almost 100% antimicrobiological properties against bacteria and fungi of samples with the addition of 4% biocide. For such samples, the presented studies showed a decrease in MFR by approx. 17%, tensile strength at break by approx. 45%, an increase in elongation at breaking by approx. 25%, a decrease in density >2%, no increase in water absorption, and no significant changes in the chemical structure and in thermal properties in relation to LDPE without biocide.
Zanieczyszczenie tworzywami, w tym mikroplastikami, stanowi problem wielu środowisk. W celu opracowania bioproduktu wytypowano mikroorganizmy przyspieszające biodegradację polilaktydu (PLA). Spośród 48 wybrano 6 szczepów bakterii, których aktywność metaboliczna istotnie wzrastała w obecności PLA, powodując zmiany degradacyjne folii. Dodatkowo nie wykazywały one fitotoksyczności wobec rzepaku.