Iron pyrite (FeS2) is a semiconductor comprised of earth-abundant elements and has the potential to be a low cost photovoltaic material with comparatively low toxicity. The properties of transition metal doped iron pyrite thin films (MxFe1−xS2 where M = Co, Ni, Cu, or Zn) deposited by aerosol-assisted chemical vapour deposition (AACVD) on various substrates including glass, (100) silicon and indium tin oxide (ITO) have been studied. Changes in the cubic lattice parameter as well as peak broadening on doping were observed by powder X-ray diffraction (p-XRD) measurements. The structural properties of the transition metal doped pyrite (MxFe1−xS2) depend strongly on the transition metal dopant used and preferred orientation in all films was found to be along the (200) plane. The influence of transition metal doping on the structure and phase transformation was significant in copper doped pyrite thin films. The height-profiling of MxFe1−xS2 films with atomic force microscopy (AFM) displayed smooth surfaces with uniform distribution of particles. Optical studies revealed that there is increment in the bandgap of MxFe1−xS2 thin films which is supported by previous work. There may be contribution from oxidation of the doped pyrite surface in band gap enhancement observed by X-ray photoelectron spectroscopy (XPS). These findings may be important to improve doped pyrite layers for photovoltaic devices.
The results of experimental and theoretical study on structural, optical, magnetic and half-metallic properties of cobalt doped ZnS thin films deposited via chemical bath deposition are presented. Phase pure deposition of cubic ZnS with a slight variation in the lattice constant due to the incorporation of cobalt into the ZnS lattice is observed. It is shown that the crystallite size calculated by the Scherrer equation has an average value of 12 nm. The agglomeration of nanocrystallites leads to the formation of spherical clusters having an average diameter of 170 nm on the substrate surface. Room temperature ferromagnetism in cobalt doped ZnS thin films depending on cobalt concentrations is observed. Such behavior corresponds to the dopant-induced magnetism in the host semiconductor and agrees well with the theoretical predictions in addition to the observation of half metallicity. The variation in the band gap as a function of cobalt concentration is attributed to the structural modification after cobalt doping and occurrence of the quantum confinement phenomenon. Photoluminescence emission characteristics of the samples show the formation of luminescence centers of cobalt ions causing the radiative recombination processes. The increased intensity of PL emissions indicated that the concentration quenching effect did not appear up to the doping concentration of 12 at%.
The complexes [Ni{(SePiPr2)2N}2] (1), [Ni(Se2PiPr2)2] (2), and [Co(Se2PiPr2)2] (4) were synthesised and the X-ray single crystal structures of (1) and (2) were determined. Thin films of nickel selenide, cobalt selenide and cobalt phosphide have been deposited by the chemical vapour deposition method using imidodiselenophosphinato-nickel(II) (1), -cobalt(II) [Co{(SePiPr2)2N}2] (3), diselenophosphinato-nickel(II) (2), -cobalt(II) (4) and diselenocarbamato-nickel(II) [Ni(Se2CNEt2)2] (5), and -cobalt(III) [Co(Se2CNEt2)3] (6) precursors.
Films of Cu2FeSn(SxSe1−x)4 (CFTSSe) have been deposited by aerosol assisted chemical vapour deposition (AACVD) using mixtures of [Fe(S2CNEt2)3], [Bu2Sn(S2CNEt2)2] and [Cu(S2CNEt2)2] as precursors for the end member CFTS and of [Cu(PPh3)(Ph2P(Se)NP(Se)Ph2)], [Sn(OAc)4] and [Fe(acac)3] for CFTSe. CFTSSe thin films were deposited from [Fe(S2CNEt2)3], [Bu2Sn(S2CNEt2)2] and [Cu(PPh3)(Ph2P(Se)NP(Se)Ph2)]. The structures, morphologies, compositions, electrical and optical properties of these materials were studied by SEM, XRD, EDX, Raman spectroscopy, electron spectroscopy, UV-Vis measurement and using a four probe conductivity meter.
Iron selenide nanocrystals (NCs) were synthesised by the thermolysis of single molecular precursors, bis(tetraisopropyldiselenoimidodiphosphinato)iron(II) (3) and bis(tetraphenyldiselenoimidodiphosphinato)iron(II) (4) in oleylamine and hexadecylamine at different growth temperatures. TEM images of the NCs showed the rod and plate-like crystallites. Both complexes were also used for the deposition of thin films by Aerosol Assisted Chemical Vapour Deposition (AACVD) onto silicon substrates. SEM images of thin films deposited from complex (3) and (4) showed significantly different morphologies under similar conditions. X-ray single crystal structures of complexes [Fe{(SePPh2)2N}2] (4) and [(SePPh2)2N)–O–(SePPh2)2N)] (5) were also determined.