Structural health monitoring and fault diagnosis are important scientific issues in mechanical engineering, civil engineering, and other disciplines. The basic premise of structural health work is to be able to accurately diagnose the fault in the structure. Therefore, the accurate fault diagnosis of structure can not only ensure the safe operation of mechanical equipment and the safe use of civil construction, but also ensure the safety of people’s lives and property. In order to improve the accuracy fault diagnosis of frame structure under noise conditions, the existing Convolutional Neural Network with Training Interference (TICNN) model is improved, and a new convolutional neural network model with strong noise resistance is proposed. In order to verify THE superiority of the proposed improved TICNN in anti-noise, comparative experiments are carried out by using TICNN, One Dimensional Convolution Neural Network (1DCNN) and First Layer Wide Convolution Kernel Deep Convolution Neural Network (WDCNN). The experimental results show that the improved TICNN has the best anti-noise ability. Based on the improved TICNN, the fault diagnosis experiment of a four-story steel structure model is carried out. The experimental results show that the improved TICNN can obtain high diagnostic accuracy under strong noise conditions, which verifies the advantages of the improved TICNN.

Accurate damage location diagnosis of frame structures is of great significance to the judgment of damage degree and subsequent maintenance of frame structures. However, the similarity characteristics of vibration data at different damage locations and noise interference bring great challenges. In order to overcome the above problems and realize accurate damage location diagnosis of the frame structure, the existing convolutional neural network with training interference (TICNN) is improved in this paper, and a high-precision neural network model named convolutional neural network based on Inception (BICNN) for fault diagnosis with strong anti-noise ability is proposed by adding the Inception module to TICNN. In order to effectively avoid the overall misjudgment problem caused by using single sensor data for damage location diagnosis, an integrated damage location diagnosis method is proposed. Taking the four-story steel frame model of the University of British Columbia as the research object, the method proposed in this paper is tested and compared with other methods. The experimental results show that the diagnosis accuracy of the proposed method is 97.38%, which is higher than other methods; at the same time, it has greater advantages in noise resistance. Therefore, the method proposed in this paper not only has high accuracy, but also has strong anti-noise ability, which can solve the problem of accurate damage location diagnosis of complex frame structures under a strong noise environment.

In the case of strong noise, when the damage occurs at different locations of the frame structure, the fault vibration signals generated are relatively close. It is difficult to accurately diagnose the specific location of the damage by using the traditional convolution neural network method. In order to solve this problem, this paper proposes a novel convolutional neural network. The method first uses wavelet decomposition and reconstruction to filter out the noise signal in the original vibration signal, then uses CEEMDAN (Complete Ensemble Empirical Mode Decomposition with Adaptive Noise Analysis) to decompose the filtered signal to highlight the feature information in the filtered signal. Finally, a convolution neural network combined with WDCNN (First Layer Wide Convolution Kernel Deep Convolution Neural Network) and LSTM (Long Short-Term Memory Network) is used to achieve the accurate classification of the signal, so as to achieve the accurate diagnosis of the damage location of the frame structure. Taking the four-story steel structure frame of Columbia University as the research object, the fault diagnosis method proposed in this paper is used to carry out experimental research under strong noise conditions. The experimental results show that the accuracy of the fault diagnosis method proposed in this paper can reach 99.97% when the signal-to-noise ratio is −4 dB and the objective function value is reduced to 10⁻⁴. Therefore, the fault diagnosis method proposed in this paper has a high accuracy in the strong noise interference environment; it can realize a high precision diagnosis of the damage location of the frame structure under a strong noise environment. The contribution and innovation of this paper is to propose a novel fault diagnosis method based on the convolutional neural network, which solves the problem of accurate damage location diagnosis of frame structures under strong noise environment.