This work focuses on the adsorptive removal of patent blue V (PBV) dye from aqueous solution by Zn/Al layered double hydroxide in fresh (LDH) and calcined (CLDH) forms. The material was synthesized via coprecipitation and samples were characterized by XRD, FTIR and TGA-DTA. Dye retention was evaluated under different experimental conditions of contact time, pH, adsorbent dosage, temperature and initial dye concentration. Experimental results show that highest adsorption capacity occurred at acidic medium. Kinetics data were properly fitted with the pseudo-second-order model. Equilibrium data were best correlated to Langmuir model with maximum monolayer adsorption capacities of 185.40 and 344.37 mg/g, respectively, for LDH and CLDH. The process was endothermic and spontaneous in nature. Based on the preliminary study, full factorial experimental design (24) was used for the optimization of the effect of solution pH, adsorbent dose, initial dye concentration and the calcination. Thus, the optimal conditions to reach high equilibrium adsorption capacity were achieved at pH of 5, adsorbent dosage of 0.1 g/L, and initial dye concentration of 15 mg/L by CLDH.
Green synthesis represents a sustainable, reliable, and eco-friendly approach for producing various materials and nanomaterials, including metal and metal oxide nanoparticles. This environmentally conscious method has garnered significant attention from materials scientists. In recent years, interest in plant-mediated nanoparticle synthesis has grown markedly, owing to advantages such as enhanced product stability, low synthesis costs, and the use of non-toxic, renewable resources. This review specifically focuses on the green synthesis of metal oxide nanoparticles using plant extracts, highlighting five key oxides: TiO2, ZnO, WO3, CuO, and Fe2O3, which are prepared through various plant-based methods. The release of toxic effluents like synthetic dyes into the environment poses serious threats to aquatic ecosystems and human health. Therefore, the application of biosynthesized nanoparticles in removing such pollutants from industrial wastewater is critically examined. This paper discusses the synthesis routes, characterization techniques, green synthesis methodologies, and evaluates the photocatalytic performance and dye degradation mechanisms of these plant-derived nanoparticles.
15 July 2025 in Euro-Mediterranean Journal for Environmental Integration