In this study, the effects of polyimide (PI) content and postcuring on thermal and mechanical properties in PI and epoxy (EP) blending systems were investigated. EP/PI (EPI) blending reduced the crosslinking density and improved the flexural and impact strength due to ductility. On the other hand, in the postcuring of EPI, the thermal resistance improved due to the increased crosslinking density and the flexural strength increased by up to 57.89% due to the enhanced stiffness, but the impact strength decreased by up to 59.54%. EPI blending induced the improvement in the mechanical properties of EP, and the postcuring process of EPI was shown to be an effective method to improve heat resistance. It was confirmed that EPI blending induces improvement in the mechanical properties of EP, and the postcuring process of EPI is an effective method for improving heat resistance.
Globally, the demand for carbon fiber-reinforced thermosetting plastics for various applications is increasing. As a result, the amount of waste from CFRPs is increasing every year, and the EU Council recommends recycling and reuse of CFRPs. Epoxy resin (EP) is used as a matrix for CFRPs, and amine hardeners are mainly used. However, no research has been conducted on recycling EP/4,4’-diaminodiphenyl sulfone (DDS)-based CFRP. In this study, the effect of steam and air pyrolysis conditions on the mechanical properties of re-cycled carbon fiber (r-CF) recovered from carbon fiber-reinforced thermosetting (epoxy/4,4′-diaminodiphenyl sulfone) plastics (CFRPs) was investigated. Steam pyrolysis enhanced resin degradation relative to N2. The tensile strength of the recovered r-CF was reduced by up to 35.12% due to oxidation by steam or air. However, the interfacial shear strength (IFSS) tended to increase by 9.18%, which is considered to be due to the increase in functional groups containing oxygen atoms and the roughness of the surface due to oxidation. The recycling of CFRP in both a steam and an air atmosphere caused a decrease in the tensile strength of r-CF. However, they were effective methods to recover r-CF that had a clean surface and increased IFSS.