With the technological drive for realizing smart cities, work on Autonomous Intersection Management (AIM) protocols opts to replace the traditional traffic light system by using cooperative Vehicle-to-Vehicle (V2V) communication in order to decrease road congestion and increase vehicular throughput. However, these protocols simply ignore pedestrians as road users and do not provision for safe pedestrian crossing. Basically, a road intersection not only could be traffic bottleneck, but also nearly 23% of the total automotive related fatalities and almost 1 million injury-causing crashes occur at or within intersections every year. This article opts to fill such a technical gap. We present a novel system that prioritizes pedestrians crossing and guarantees safety while preserving the efficiency of AIM based approaches. Our system does not require additional infrastructure or pedestrian-carried devices, and works for both self-driving and human-derived vehicles. The simulation results show that our proposed system for Autonomous Pedestrian Crossing (APC) protocol of non-signalized intersections significantly decreases the vehicle’s delay and pedestrian walk duration compared to the conventional traffic light-based systems. The effectiveness of APC is validated for traffic scenarios with (1) self-driving vehicles, and (2) mix of human-based and self-driving vehicles.
Driving simulators are increasingly being incorporated by driving schools into a training process for a variety of vehicles. The motion platform is a major component integrated into simulators to enhance the sense of presence and fidelity of the driving simulator. However, less effort has been devoted to assessing the motion cues feedback on trainee performance in simulators. To address this gap, we thoroughly study the impact of motion cues on braking at a target point as an elementary behavior that reflects the overall driver’s performance. In this paper, we use an eye-tracking device to evaluate driver behavior in addition to evaluating data from a driving simulator and considering participants’ feedback. Furthermore, we compare the effect of different motion levels (“No motion”, “Mild motion”, and “Full motion”) in two road scenarios: with and without the pre-braking warning signs with the speed feedback given by the speedometer. The results showed that a full level of motion cues had a positive effect on braking smoothness and gaze fixation on the track. In particular, the presence of full motion cues helped the participants to gradually decelerate from 5 to 0 ms−1 in the last 240 m before the stop line in both scenarios, without and with warning signs, compared to the hardest braking from 25 to 0 ms−1 produced under the no motion cues conditions. Moreover, the results showed that a combination of the mild motion conditions and warning signs led to an underestimation of the actual speed and a greater fixation of the gaze on the speedometer. Questionnaire data revealed that 95% of the participants did not suffer from motion sickness symptoms, yet participants’ preferences did not indicate that they were aware of the impact of simulator conditions on their driving behavior.
Many technical communities are vigorously pursuing research topics that contribute to the Autonomous Traffic Management (ATM). ATM is a research field of Intelligent Transportation Systems (ITS) that aims to decrease traffic congestion based on autonomous vehicles cooperation and capacities. However, a literature review reveals that many issues related to ATM and autonomous vehicles are up for discussion, and so are the key research challenges lying ahead. We first present the ATM aims and scope to provide a basis for discussing related open research problems. This paper enumerates and discusses six key research topics and research problems within those issues.
The present paper focuses on vehicle simulator fidelity, particularly the effect of motion cues intensity on driver performance. The 6-DOF motion platform was used in the experiment; however, we mainly focused on one characteristic of driving behavior. The braking performance of 24 participants in a car simulator was recorded and analyzed. The experiment scenario was composed of acceleration to 120 km/h followed by smooth deceleration to a stop line with prior warning signs at distances of 240, 160, and 80 m to the finish line. To assess the effect of the motion cues, each driver performed the run three times with different motion platform settings–no motion, moderate motion, and maximal possible response and range. The results from the driving simulator were compared with data acquired in an equivalent driving scenario performed in real conditions on a polygon track and taken as reference data. The driving simulator and real car accelerations were recorded using the Xsens MTi-G sensor. The outcomes confirmed the hypothesis that driving with a higher level of motion cues in the driving simulator brought more natural braking behavior of the experimental drivers, better correlated with the real car driving test data, although exceptions were found.
The major challenges facing Intelligent Transportation Systems (ITS) are how to decrease traffic congestion and increase safety. Recent efforts are focusing on using new technologies such as sensors and vehicular communication to enhance road traffic flaw. However, novel systems based on cooperative driving aim to reduce congestion by decreasing travel delay and avoiding vehicle stopping as much as possible without taking into account other road users such as bicycles. Cyclists are one of the three most vulnerable road users that are usually injured or even killed when they are involved in a collision with a vehicle. To fill this gap, we propose Distant Bicycle Detection and Avoidance (DBDA) protocol for autonomous vehicles that enables distant detection of bicycle using V2V communication for up to 1 km and guarantees a safe avoidance of a bicycle in non-signalized roads.