Driving simulators are increasingly being incorporated by driving schools into a training process for a variety of vehicles. The motion platform is a major component integrated into simulators to enhance the sense of presence and fidelity of the driving simulator. However, less effort has been devoted to assessing the motion cues feedback on trainee performance in simulators. To address this gap, we thoroughly study the impact of motion cues on braking at a target point as an elementary behavior that reflects the overall driver’s performance. In this paper, we use an eye-tracking device to evaluate driver behavior in addition to evaluating data from a driving simulator and considering participants’ feedback. Furthermore, we compare the effect of different motion levels (“No motion”, “Mild motion”, and “Full motion”) in two road scenarios: with and without the pre-braking warning signs with the speed feedback given by the speedometer. The results showed that a full level of motion cues had a positive effect on braking smoothness and gaze fixation on the track. In particular, the presence of full motion cues helped the participants to gradually decelerate from 5 to 0 ms−1 in the last 240 m before the stop line in both scenarios, without and with warning signs, compared to the hardest braking from 25 to 0 ms−1 produced under the no motion cues conditions. Moreover, the results showed that a combination of the mild motion conditions and warning signs led to an underestimation of the actual speed and a greater fixation of the gaze on the speedometer. Questionnaire data revealed that 95% of the participants did not suffer from motion sickness symptoms, yet participants’ preferences did not indicate that they were aware of the impact of simulator conditions on their driving behavior.
This article deals with a Human Machine Interface of Electric vehicles starting from the history of Electric Vehicles HMI, describes currently used system elements and provide evaluation of their advantages and disadvantages. A new concept of Dynamic HMI for Electric Vehicles is introduced to improve EV efficiency in terms of energy consumption and range distance, and consequently increase their popularity among users. This interface is capable to adapt itself to user or system needs and changes dynamically based on EV battery State of Charge or reachability of desired destination. Such implementation of HMI address one of the main reason why users still prefer conventional vehicles with internal combustion engine to EV - range anxiety phenomena. This article aims to be a guideline for a design of new concept of HMI for EV, studies user requirements and propose a methodology of system development including concept definition and user acceptance validation methodology on vehicle driving simulator.
The paper presents the innovative approach to a high-fidelity motorcycle riding simulator based on VR (Virtual Reality)-visualization, equipped with a Gough-Stewart 6-DOF (Degrees of Freedom) motion platform. Such a solution integrates a real-time tension sensor system as a source for highly realistic motion cueing control as well as the servomotor integrated into the steering system. Tension forces are measured at four points on the mock-up chassis, allowing a comprehensive analysis of rider interaction during various maneuvers. The simulator is developed to simulate realistic riding scenarios with immersive motion and visual feedback, enhanced with the simulation of external influences—headwind. This paper presents results of a validation study—pilot experiments conducted to evaluate selected riding scenarios and validate the innovative simulator setup, focusing on force distribution and system responsiveness to support further research in motorcycle HMI (Human–Machine Interaction), rider behavior, and training.
The world is gradually moving towards green solutions in all industries. This is the case in the automotive industry as well and it is logical that vehicle simulators must follow this trend and functionally approach the increasingly widespread battery electric vehicles (BEVs). The differences in the parameters of vehicle simulators with alternative powertrains have already been covered. This paper deals with the modification of both the simulator hardware and software to improve the behavior of the physical vehicle model, representing all functions through a programmable human machine interface (HMI) and providing an approximation of the driving experience of a real vehicle. The topic of this paper first describes the functional scheme and physical model of the simulator adapted for HMI simulations of BEVs and hybrid electric vehicles (HEVs). A prototype design of the virtual cockpit is also described. Then, the design of the experiment is explained to validate the displayed and recorded values through a qualitative study by pilot testing on a vehicle simulator. A discussion of the measured results is concluded.
Urban comfort and safety go along with travel and traffic management for the cities. Facing automatization of transport brings necessity for the ITS solutions to provide efficient communication between vehicles, infrastructure and other traffic participants. Parking in the cities is a daily travel related task. Efficient automated parking solutions can contribute to individual time management as well as to reduction of traffic flow that is connected with parking spot search – especially in big cities. User acceptance of new technologies that arise with automated driving depends on their usability and interface. This paper presents a pilot demonstration of automated parking function with a mobile app interface. Observation of visual behavior (eye tracking) provide analyses of automated parking function and mobile app of modified electric prototype of e-vehicle "Skoda Rapid".