Visible-blind ultraviolet-selective photodetection and ultraviolet-visible broad spectral photodetection are two essential functions eagerly pursued in each application area. However, they usually cannot be realized simultaneously in a bare photodetector because their different underlying photoexcitation processes would interfere with each other. In this work, a photodetector integrating the two distinct photodetector characteristics is presented. The device is prepared based on the heterojunction of a large-scale aluminum nitride bulk crystal and monolayer graphene. The visible-blind ultraviolet-selective photodetection and the ultraviolet-visible broad spectral photodetection are separately manifested in the device depending on the bias polarity. Under a negative bias, the device is a visible-blind deep-ultraviolet photodetector, demonstrating a 193/785 nm rejection ratio of over 106 for the photocurrent and a 193/405 nm rejection ratio of over 103 for the signal/noise ratio. Under a positive bias, the device performs as a broad spectral photodetector responding to light from 193 to 785 nm. Systematical characterization reveals that different photodetection manners are the synergistical results of the different photon energies of the incident light, wavelength-dependent penetration depths in AlN, and the different working modes of the device under different bias conditions. This work provides a particular dual-functional photodetector, which is of great significance in terms of both application and device physics.
High-quality aluminum nitride (AlN) crystals are the key material for the development of high-performance solid-state solar-blind vacuum-ultraviolet (VUV) photodetectors. However, the commonly used epitaxial method to grow AlN crystals would limit this development due to the existence of indispensable substrates. This study addresses this issue using free-standing lamellar AlN single crystals that are grown using the physical vapor transport method. The large lateral dimension of the crystal enables the construction of an Au-AlN-graphene van der Waals heterojunction, which can function as a vertical VUV photodetector with the graphene serving as the light window. The asymmetric junctions formed on the two sides of the crystal and the limited penetration of the VUV endow the device with a bias polarity-dependent photoresponse feature arising from different photoelectric processes. Furthermore, the device demonstrates a high responsivity of 5.77 A W−1 and a high specific detectivity of 1.71 × 1013 cm Hz1/2 W−1 under the illumination of a 193 nm laser. The high crystallinity of the AlN guarantees a high spectral selectivity of responsivity with a 193 nm/280 nm rejection ratio of 3 × 102. This work would inspire the development of wide-bandgap-semiconductor-based VUV photodetectors in terms of methodology and mechanism.
Aluminum nitride (AlN) exhibits excellent high-temperature resistance, chemical stability, and a wide bandgap, making it a prime candidate material for deep ultraviolet detectors. In this study, a modified metal–semiconductor–metal (MSM) photodetector using titanium (Ti) electrodes and millimeter-scale AlN bulk polycrystals grown through physical vapor transport is developed, demonstrating photoresponse to light from visible to vacuum ultraviolet. An additional tungsten (W) electrode is designed on the backside of the device, transforming it into a W-MSM device. A proper bias to the W electrode (VW) is found valid to boost the performance of the photodetector. Representatively, with a V of 20 V and VW of −12 V applied, the device achieves improvements in responsivity (R), detectivity (D*), and external quantum efficiency of 112.84%, 30.5%, and 112.84%, respectively, to 532 nm light and 123.18%, 36.84%, and 123.18%, respectively, to 193 nm light. Furthermore, it is found that with the total voltage being instant, optimizing the distribution of voltage between the Ti electrode and the W electrode would induce a better photoresponse than applying voltage solely to the Ti electrode (VW = 0 V). The reason is elaborated through modeling the voltage distribution in the device, revealing the particular role of the bulk semiconductor in this feature. This research provides a facile and innovative approach to developing low-power photodetectors for bulk materials.
Wurtzite aluminum nitride (AlN) crystal has a non-centrosymmetric crystal structure with only a single axis of symmetry. In an AlN crystal, the electronegativity difference between the Al atom and N atom leads to a distortion of electron cloud distribution outside the nucleus and a spontaneous polarization (SP) along the c-axis direction. The N-polar surface along the directions of [000-1] has higher surface energy than the Al-polar surface along the directions of [0001]. Due to the different atomic arrangement, Al atoms on the Al-polar surface bond with O and OH− in the environment to generate Al2O3·xH2O, which prevents the reaction from occurring inside the crystal. After the Al2O3·xH2O dissolve in an alkaline environment, N atoms have three dangling bonds exposed on the surface, which can also protect OH− from destroying the internal Al-N bonds, so the Al-polar surface is more stable than the N-polar surface.
1 April 2021 in Journal of Physics: Conference Series
A series of AlxGa1-xN films are deposited on Si (111) substrates by radio frequency magnetron sputter with different experimental Parameters. Crystallinities, elemental components and surface morphologies of films are investigated in terms of their deposition Parameters. The results reveal that the films grow along with the (004) crystal direction and have a more Al component than the target, which is attributed to the higher bond energy of Al-N. A higher pressure and nitrogen concentration lead to more surface structures such as bubbles on the AlxGa1-xN films. Using a pressure of 1.0 Pa and nitrogen concentration of 33%, AlxGa1-xN films with good quality are finalized achieved.