The electrochemical behaviour for passivation of new alloy corrosion-resistant steel Cr10Mo1 immersed in alkaline solutions with different pH values (13.3, 12.0, 10.5, and 9.0) and chloride contents (0.2 M and 1.0 M), was investigated by various electrochemical techniques: linear polarization resistance, electrochemical impedance spectroscopy and capacitance measurements. The chemical composition and structure of passive films were determined by XPS. The morphological features and surface composition of the immersed steel were evaluated by SEM together with EDS chemical analysis. The results evidence that pH plays an important role in the passivation of the corrosion-resistant steel and the effect is highly dependent upon the chloride contents. In solutions with low chloride (0.2 M), the corrosion-resistant steel has notably enhanced passivity with pH falling from 13.3 to 9.0, but does conversely when in presence of high chloride (1.0 M). The passive film on the corrosion-resistant steel presents a bilayer structure: an outer layer enriched in Fe oxides and hydroxides, and an inner layer, rich in Cr species. The film composition varies with pH values and chloride contents. As the pH drops, more Cr oxides are enriched in the film while Fe oxides gradually decompose. Increasing chloride promotes Cr oxides and Fe oxides to transform into their hydroxides with little protection, and this is more significant at lower pH (10.5 and 9.0). These changes annotate passivation characteristics of the corrosion-resistant steel in the solutions of different electrolyte.
Surface nanocrystallization (SNC) modification can be used to realize the high-efficiency derusting of rusted Cr-alloyed rebar and obtain nanostructured grains on the surface of the rebar. The corrosion resistance performance of SNC rebar in a simulated Cl--containing concrete pore solution was evaluated on the basis of electrochemical experiments. Potentiodynamic polarization testing showed that the passivation current density of the SNC rebar was about 18% of that of the rusted rebar. The structural composition of the passivation film of the SNC rebar in a concrete environment was studied using a novel characterization method, namely XPS deep sputtering, which confirmed that it had higher concentrations of Cr/Fe oxide and hydroxide, and therefore exhibited an enhanced degree of oxidation. Moreover, scanning electron microscopy and transmission electron microscopy were employed to investigate the microstructural characteristics of the SNC rebar, which was characterized by nanostructured grains with grain sizes ranging from 250 nm to 300 nm and which contained massive high-energy crystal defects, thereby promoting the film-forming reaction of Cr/Fe elements. The results of XPS depth analysis and microstructure characterization demonstrated that the SNC rebar exhibited excellent passivation performance in the concrete environment. These findings offer a new perspective on enhancing the passivation performance and chloride resistance of alloyed rebar, and provide guidance on the implementation of SNC rebar in actual engineering applications.
New alloy corrosion-resistant steel Cr10Mo1 shows excellent corrosion resistance to chloride. UPS combined with XPS were used to characterize the chemical composition and electronic structure of passive films on the steel exposed to chloride at different contents (0 M, 0.2 M and 2.0 M), to understand the high corrosion resistance of this steel. XPS results show that, the passive film formed on the steel includes Fe/Cr oxides and maintain good stability irrespective of chloride increasing. According to the UPS analysis, Cr-enriched passive film on the steel shows low reactivity with chlorine ions, for the electronic structure at the oxides film surface hardly gets affected by chloride even at 2.0 M, which supports high stability of the Cr-enriched passive film against chloride, and thus CR steel exhibits excellent corrosion resistance in presence of high chloride.