Edwin Eyram Klu

Mr. Edwin Eyram Klu

Hohai University
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 August 2019 in Metals
Verified
Journal Article
Open access
PDF file
GWGuowei Wang
Guowei Wang
DSDan SONG
Dan SONG
CLCheng Li
Cheng Li
EKEdwin Eyram Klu
Edwin Eyram Klu
Yanxin QiaoYanxin Qiao
Yanxin Qiao
AMAibin Ma
Aibin Ma
Cast Mg-9Li alloy was successfully solid-solution (SS) treated via heating at 575 °C for 4.5 h and rapidly quenched with ice-water mixture. The mechanical property and corrosion resistance of the SS alloy were simultaneously improved. Rapid bcc/hcp phase transition of the alloy occurred during the quenching process, creating the newly precipitated needle-like fine α-Mg phase, uniformly distributed in the β-Li phase matrix. Dramatic grain refinement and uniform distribution of the α-Mg phase, as well as the massively increased α/β phase interfaces, are factors leading to the improved mechanical property of the SS alloy. Meanwhile, due to the modified duplex-phase structure, the SS alloy has a uniform corrosion-resistant surface film on the β-Li phase, which completely covers the entire alloy surface and efficiently protects the substrate. In addition, the SS alloy has fewer difference in the elements concentration and corrosion activity of the duplex phases, which reduces the pitting sensitivity and improves the corrosion resistance of the alloy matrix. The findings in this binary Mg-Li alloy can also serve as a benchmark for other more practical and complicated Mg-Li alloys.

3 September 2021 in Metals
Verified
Journal Article
Open access
PDF file
DSDan SONG
Dan SONG
BLBeibei Lian
Beibei Lian
YFYulong Fu
Yulong Fu
GWGuowei Wang
Guowei Wang
Yanxin QiaoYanxin Qiao
Yanxin Qiao
JJJinghua Jiang
Jinghua Jiang
The formation of a corrosion-resistant coating by the hydrothermal method is an effective way to provide significant protection to magnesium alloys. However, it is a challenge to prepare such a coating on magnesium-lithium alloys because of its high chemical activity. Herein, the dual-layer structured corrosion-resistant conversion coating composed with Mg(OH)2 and LiOH was successfully synthesized on Mg-9Li alloy by the optimization of the hydrothermal reaction in deionized water. The coating synthesized at 140 °C for 2 h has the best anti-corrosion performance in all obtained coatings, which has a uniform and compact coating with thickness of about 3 μm. The improvement of the hydrophobicity due to the stacking structure of the surface layer, as well as the barrier effect of its inner compact coating on corrosive media, lead to the excellent anti-corrosion performance of the obtained hydrothermal conversion coating

14 September 2019 in Metals
Verified
Journal Article
Open access
PDF file
EKEdwin Eyram Klu
Edwin Eyram Klu
DSDan SONG
Dan SONG
CLChen Li
Chen Li
GWGuowei Wang
Guowei Wang
ZZzhou zhikai
zhou zhikai
JJJinghua Jiang
Jinghua Jiang
In this study, a high-strength Mg-9Li alloy was developed via multi-pass equal-channel-angular-pressing (ECAP) and post rolling, of which the yield tensile stress (YTS) and ultimate tensile stress (UTS) were 166 MPa and 174 MPa representing about 219% and 70% increase in YTS and UTS respectively, compared to the cast alloy. The cast alloy was ECAP processed at 200 °C for 4, 8, and 16 passes, followed by room-temperature rolling to a total thickness reduction of 50%. The 8-passes ECAPed (E8) alloy presented the best strength of all the ECAPed alloys, and the post rolling endowed the alloy (E8R) further strengthening and the best strength of all the alloys. Grain-boundary strengthening and dislocation strengthening were the two major factors for the high strength of the processed alloys. The α-Mg phase grains were greatly refined to about 2 μm after 8-passes ECAP, and was further refined to about 800 nm ~1.5 μm after rolling. Significant grain refinement endowed the alloy with sufficient grain-boundary strengthening. Profuse intragranular dislocation accumulated in the deformed matrix, leading to the significant dislocation hardening of the alloy. Rolling-induced strong basal texture of the α-Mg phase also enhanced the further strengthening of the E8R alloy.

15 January 2023 in Coatings
Verified
Journal Article
Open access
PDF file
WLWeilin Liu
Weilin Liu
QWQiuyue Wang
Qiuyue Wang
GZGongnian Zou
Gongnian Zou
EKEdwin Eyram Klu
Edwin Eyram Klu
ZAZhiyong Ai
Zhiyong Ai
DSDan SONG
Dan SONG
Surface nanocrystallization (SNC) modification can be used to realize the high-efficiency derusting of rusted Cr-alloyed rebar and obtain nanostructured grains on the surface of the rebar. The corrosion resistance performance of SNC rebar in a simulated Cl--containing concrete pore solution was evaluated on the basis of electrochemical experiments. Potentiodynamic polarization testing showed that the passivation current density of the SNC rebar was about 18% of that of the rusted rebar. The structural composition of the passivation film of the SNC rebar in a concrete environment was studied using a novel characterization method, namely XPS deep sputtering, which confirmed that it had higher concentrations of Cr/Fe oxide and hydroxide, and therefore exhibited an enhanced degree of oxidation. Moreover, scanning electron microscopy and transmission electron microscopy were employed to investigate the microstructural characteristics of the SNC rebar, which was characterized by nanostructured grains with grain sizes ranging from 250 nm to 300 nm and which contained massive high-energy crystal defects, thereby promoting the film-forming reaction of Cr/Fe elements. The results of XPS depth analysis and microstructure characterization demonstrated that the SNC rebar exhibited excellent passivation performance in the concrete environment. These findings offer a new perspective on enhancing the passivation performance and chloride resistance of alloyed rebar, and provide guidance on the implementation of SNC rebar in actual engineering applications.

28 February 2020 in Coatings
Verified
Journal Article
Open access
PDF file
GWGuowei Wang
Guowei Wang
DSDan SONG
Dan SONG
ZZzhou zhikai
zhou zhikai
EKEdwin Eyram Klu
Edwin Eyram Klu
YLYi Liu
Yi Liu
AMAibin Ma
Aibin Ma
This work analyzes the effects of ultrafine aluminum (Al) grains on the anodizing coating reaction and anticorrosion performance of anodized industrial pure Al. Equal-channel angular pressing (ECAP) was applied to cast pure Al continuously for 16 passes at room temperature, and its average grain size was dramatically refined to about 1.5 μm. The ultrafine-grain (UFG) pure Al was further anodized with a cast sample via a parallel anodizing circuit at a constant total input current. Benefited by the higher volume fraction of grain boundaries and higher internal energy of the UFG substrate, the anodizing process of the ECAP-processed pure Al was significantly accelerated, showing a more intense initial anodizing reaction, a faster initial coating thickening, and much earlier porous-layer formation compared to the cast sample. As the anodizing reaction continued, the newly formed thicker coating of the ECAP-coated sample significantly hindered the diffusion process, weakening the thermodynamic advantage and decreasing the anodizing current of the ECAP-processed sample. During the entire anodizing duration, the ECAP-processed pure Al experienced gradually decreased anodizing current, while the cast sample experienced increased anodizing current. Because of the more total reaction, the ECAP-coated sample always maintained a relatively thicker coating and better anticorrosion performance during the entire anodizing duration.