Polyethylene oxide (PEO) based polymer electrolytes have been widely used in solid-state lithium batteries (SSBs) owing to the high solubility of lithium salt, favourable ionic conductivity, flexibility for improved interfacial contact and scalable processing.
As implantable medical electronics (IMEs) developed for healthcare monitoring and biomedical therapy are extensively explored and deployed clinically, the demand for non‐invasive implantable biomedical electronics is rapidly surging. Current rigid and bulky implantable microelectronic power sources are prone to immune rejection and incision, or cannot provide enough energy for long‐term use, which greatly limits the development of miniaturized implantable medical devices. Herein, a comprehensive review of the historical development of IMEs and the applicable miniaturized power sources along with their advantages and limitations is given. Despite recent advances in microfabrication techniques, biocompatible materials have facilitated the development of IMEs system toward non‐invasive, ultra‐flexible, bioresorbable, wireless and multifunctional, progress in the development of minimally invasive power sources in implantable systems has remained limited. Here three promising minimally invasive power sources summarized, including energy storage devices (biodegradable primary batteries, rechargeable batteries and supercapacitors), human body energy harvesters (nanogenerators and biofuel cells) and wireless power transfer (far‐field radiofrequency radiation, near‐field wireless power transfer, ultrasonic and photovoltaic power transfer). The energy storage and energy harvesting mechanism, configurational design, material selection, output power and in vivo applications are also discussed. It is expected to give a comprehensive understanding of the minimally invasive power sources driven IMEs system for painless health monitoring and biomedical therapy with long‐term stable functions.
Graphite as a positive electrode material of dual ion batteries (DIBs) has attracted tremendous attentions for its advantages including low lost, high working voltage and high energy density. However, very few literatures regarding to the real-time observation of anion intercalation behavior and surface evolution of graphite in DIBs have been reported. Herein, we use in situ atomic force microscope (AFM) to directly observe the intercalation/de-intercalation processes of PF6− in graphite in real time. First, by measuring the change in the distance between graphene layers during intercalation, we found that PF6− intercalates in one of every three graphite layers and the intercalation speed is measured to be 2 µm·min−1. Second, graphite will wrinkle and suffer structural damages at high voltages, along with severe electrolyte decomposition on the surface. These findings provide useful information for further optimizing the capacity and the stability of graphite anode in DIBs.
Lithium‐ion batteries (LIBs) have been widely used in electric vehicles and energy storage industries. An understanding of the reaction processes and degradation mechanism in LIBs is crucial for optimizing their performance. In situ atomic force microscopy (AFM) as a surface‐sensitive tool has been applied in the real‐time monitoring of the interfacial processes within lithium batteries. Here, we reviewed the recent progress of the application of in situ AFM for battery characterizations, including LIBs, lithium–sulfur batteries, and lithium–oxygen batteries. We summarized advances in the in situ AFM for recording electrode/electrolyte interface, mechanical properties, morphological changes, and surface evolution. Future directions of in situ AFM for the development of lithium batteries were also discussed in this review.