It is crucial to monitor the status of aquaculture objects in recirculating aquaculture systems (RASs). Due to their high density and a high degree of intensification, aquaculture objects in such systems need to be monitored for a long time period to prevent losses caused by various factors. Object detection algorithms are gradually being used in the aquaculture industry, but it is difficult to achieve good results for scenes with high density and complex environments. This paper proposes a monitoring method for Larimichthys crocea in a RAS, which includes the detection and tracking of abnormal behavior. The improved YOLOX-S is used to detect Larimichthys crocea with abnormal behavior in real time. Aiming to solve the problems of stacking, deformation, occlusion, and too-small objects in a fishpond, the object detection algorithm used is improved by modifying the CSP module, adding coordinate attention, and modifying the part of the structure of the neck. After improvement, the AP50 reaches 98.4% and AP50:95 is also 16.2% higher than the original algorithm. In terms of tracking, due to the similarity in the fish’s appearance, Bytetrack is used to track the detected objects, avoiding the ID switching caused by re-identification using appearance features. In the actual RAS environment, both MOTA and IDF1 can reach more than 95% under the premise of fully meeting real-time tracking, and the ID of the tracked Larimichthys crocea with abnormal behavior can be maintained stably. Our work can identify and track the abnormal behavior of fish efficiently, and this will provide data support for subsequent automatic treatment, thus avoiding loss expansion and improving the production efficiency of RASs.
It is urgently desired to develop high-performance wind energy collectors to power numerous microelectronic devices along with the Internet of Things (IoT). A roller-type triboelectric nanogenerator (R-TENG) based on rotational friction between wool and stacked interfaces is proposed and efficiently used for harvesting wind energy. Wool, an electropositive and flexible material, is utilized in the design, effectively reducing abrasion on the contact surface and adjusting the output in response to varying compression levels. The conductive layer greatly enhances the output performance, which produces more induced charge by stacking different triboelectric materials in a particular order. By adding bottom power generation units, the internal space of the unit can be fully utilized to improve its energy conversion efficiency. At 900 rpm of the motor, the instantaneous open-circuit voltage (VOC), short-circuit current (ISC), and transferred charge (QSC) of the R-TENG can reach 1504 V, 67.24 μA and 157.4 nC, respectively. After connection to a load via a rectifier bridge, the R-TENG has a maximum power output of 14.58 mW and an instantaneous power density of 11.7 W m−3. In laboratory wind energy harvesting experiments, the design can easily drive at least 720 LEDs and charge a 2000 μF capacitor up to about 1.5 V in 78 s. In practice, the R-TENG can collect natural wind on windy seashores and moving vehicles to charge capacitors and successfully drive small electronic devices in real time. The experimental results indicate that the stacked PTFE/FKM/Wool R-TENG exhibits considerable output performance, making it a promising solution for efficiently capturing wind energy from all directions.
Developing a self-powered sensor system for real-time measurement of wind speed and direction in dispersed locations is crucial for environmental monitoring. In this study, a rotational wind sensor based on a noncontact triboelectric nanogenerator (TENG) (RWT-sensor) is proposed, which can operate autonomously at ultralow wind speeds and has the capability to measure wind speed and multiple wind directions in real time. The device, featuring a noncontact design, utilizes the gap between the wool and Teflon, along with the lightweight characteristic of the wool material, to achieve a starting wind speed of less than 1 m/s. The wind speed can be determined by reading the sensor’s voltage frequency at various wind speeds. The voltage frequency that the sensor can reach within the wind speed range of 1–12 m/s is 3.5–67.34 Hz, with a sensitivity of 5.88 Hz/(m/s), and a goodness of fit ${R}^{{2}} =0.99$ 781. Meanwhile, the voltage range that the sensor can achieve is approximately 1.5–50 V, and the sensor will monitor eight wind directions based on the output voltage value when the conductive brush approaches without touching one or two reverse electrodes on the base. In addition, the device demonstrates excellent stability and durability at various temperature and humidity conditions. Therefore, the present novel wind sensor has great potential for application in self-powered wind speed sensing and high-sensitivity wind direction sensing.
A PFP-TENG based on a three-tribo-layer structure is proposed. It combines the advantages of elastic and inelastic triboelectric materials, which result in a high power density of 145.3 W m −3 and the ability to drive more than 1400 LEDs.
27 February 2026 in IEEE Transactions on Electron Devices
Self-powered photodetectors with low dark current and high sensitivity are highly desirable for advanced optoelectronic applications. Herein, we report a novel temperature-sensitive photodetector based on a CH3NH3PbI3/VO2 composite film, which integrates the strong visible-light absorption of perovskite and the reversible metal-insulator transition (MIT) of VO2. Operating under zero bias, the device exhibits excellent self-powered performance, achieving a high responsivity of 538 mAW${}^{\text {-1}}$ and a broad spectral response ranging from 450 to800nm. Notably, a unique reversible dark current polarity reversal is observed at temperatures below 306.3 K, where the dark current direction is opposite to that of the photocurrent. Temperature-dependent characterizations reveal enhanced photocurrent dynamics near the phase transition regions of both CH3NH3PbI3 and VO2. At 300 K, the device attains a detectivity of $3.2\times 10^{{12}}$ Jones and an on–off ratio of 342. This work proposes a novel strategy leveraging the synergistic effect of dual phase-transition materials, realizes a temperature-tunable self-powered mechanism induced by spin-coating-induced perovskite inhomogeneity, and bridges the gap between phase-transition materials and hybrid perovskite systems, paving the way for multifunctional photodetectors in dual-parameter sensing and adaptive optical systems.