Physical parameters sensing, largely benefits the lifetime and operational costs of machines, has been widely used for machine fault detection. Herein, we developed a multi-node sensor network which is fully self-powered by harvesting mechanical vibration energy, to establish a machine fault detection system. A multilayered vibrational triboelectric nanogenerator (V-TENG) was designed to scavenge energy from working machines. Triggered by a vibration motion with the frequency of 8 Hz, the V-TENG can generate an output with power density of 3.33 mW/m3. With a power management module, the micro control unit integrated with sensors and a wireless transmitter can be continuously powered by the V-TENG to construct a self-powered vibration sensor node (SVSN). A supporting vector machine algorithm-based machine fault detection system was then established through a three-SVSN network by acquiring acceleration and temperature data from the working machine. Based on the system, different working conditions of the machine were recognized with an accuracy of 83.6%. The TENG-based SVSN for machine fault detection has demonstrated wide prospects in production monitoring, intelligent manufacturing and smart factory. Moreover, the proposed self-powered sensor network has great potential and wide application in the era of distributed internet of things, artificial intelligent and big data.
The wearable tactile sensors have attracted great attention in the fields of intelligent robots, healthcare monitors and human-machine interactions. To create active tactile sensors that can directly generate electrical signals in response to stimuli from the surrounding environment is of great significance. Triboelectric nanogenerators (TENGs) have the advantages of high sensitivity, fast response speed and low cost that can convert any type of mechanical motion in the surrounding environment into electrical signals, which provides an effective strategy to design the self-powered active tactile sensors. Here, an overview of the development in TENGs as tactile stimulators for multifunctional sensing and artificial synapses is systematically introduced. Firstly, the applications of TENGs as tactile stimulators in pressure, temperature, proximity sensing, and object recognition are introduced in detail. Then, the research progress of TENGs as tactile stimulators for artificial synapses is emphatically introduced, which is mainly reflected in the electrolyte-gate synaptic transistors, optoelectronic synaptic transistors, floating-gate synaptic transistors, reduced graphene oxides-based artificial synapse, and integrated circuit-based artificial synapse and nervous systems. Finally, the challenges of TENGs as tactile stimulators for multifunctional sensing and artificial synapses in practical applications are summarized, and the future development prospects are expected.
With the extensive application of wireless sensing nodes, the demand for sustainable energy in unattended environments is increasing. Here, we report a self-powered and autonomous vibrational wake-up system (SAVWS) based on triboelectric nanogenerators and micro-electromechanical system (MEMS) switches. The energy triboelectric nanogenerator (E-TENG) harvests vibration energy to power the wireless transmitter through a MEMS switch. The signal triboelectric nanogenerator (S-TENG) controls the state of the MEMS switch as a self-powered accelerometer and shows good linearity in the acceleration range of 1–4.5 m/s2 at 30 Hz with a sensitivity of about 14.6 V/(m/s2). When the acceleration increases, the S-TENG turns on the MEMS switch, and the wireless transmitter transmits an alarm signal with the energy from E-TENG, using only 0.64 mJ. Using TENGs simultaneously as an energy source and a sensor, the SAVWS provides a self-powered vibration monitoring solution for unattended environments and shows extensive applications and great promise in smart factories, autonomous driving, and the Internet of Things.