A substantial part of the world building heritage has been performed by earthen building. The durability of this existing heritage and mainly of the new buildings built with earth is particularly conditioned by the erosion caused by water action, especially in countries with high levels of rainfall. This research aims to contribute to the increase of knowledge about the ancient building techniques that provide enhanced durability. It is possible to analyse the ancestral practices used to protect the earth material from the water action in order to understand how the old earthen buildings were preserved over the centuries, resisting to harsh weather conditions. Among these techniques are: the incorporation of biopolymers (such as oils or fats from animal or vegetable origin); the addition of some minerals; and the earth stabilization with lime. However, this knowledge seems to be forgotten, probably due to the prejudice related to earthen constructions, which several times are associated with a poor building. This research also focuses on the study of new methods of earth stabilization with lime and biopolymers, adapting the ancient knowledge to improve the durability related to the water action. Therefore, alternative solutions can be obtained to improve the performance of earthen buildings, mainly the resistance of the material in the presence of water, reducing its permeability to water. In addition, with the proposed solutions it is possible to obtain good levels of water vapour permeability, one of the major advantages of the construction with earth.
Earthen construction is one of the world’s oldest and most popular construction methods, and it is still the target of prejudice due to the loss of ancestral knowledge. Due to the need for more effective and healthy building solutions, this study conducted a survey to determine the interest and knowledge of construction professionals regarding sustainable and natural materials and building techniques to understand how open these professionals are to changes in their working methods and if they identify urgency in that change. With the intent of proving the durability of earthen construction materials, laboratory research was developed which involved the preparation and performance evaluation of samples of earthen elements from the most-used techniques: rammed earth and compressed earth blocks. This evaluation was performed using the accelerated erosion test, simulating periods of rainfall and drying, and the post-test loss of resistance was also evaluated. According to the results obtained from the research survey, there is a predominant lack of knowledge about earthen construction and other traditional and sustainable materials. On the other hand, the experiments demonstrated that earthen construction can be durable when using either a small percentage of stabilizing material or a covering plaster.
Bio-based materials help reduce the consumption of non-renewable resources, contributing to the development of sustainable construction. Industrial Hemp Concrete (IHC), which uses hemp stalk (HS) as an aggregate and a lime-based binder, is a bio-based material with various applications. This research developed a new hybrid composite in order to improve the mechanical strength and durability of hemp concrete, with the incorporation of sugarcane bagasse (SCB) as an aggregate, a resource of a renewable origin that is abundant in several countries. Different formulations were used, which were molded and pressed manually, evaluating their cohesion and compactness. The performance of the developed hybrid composite was measured considering mechanical, thermal, and durability properties. The compression test results showed an increase of 19–24% for composites with 75% hemp and 25% SCB. Thermal conductivity and thermal resistance coefficients were also improved, reaching 0.098 (W/m °C) and 0.489 (m2 °C/W), respectively. This aggregate combination also showed the lowest water absorption coefficient (reducing by 35%) and the best performance in durability tests compared to IHC. The resistance to freeze–thaw is highlighted, increasing 400%. The main reason is the influence of the SCB addition because the short and thin fiber form helps to maintain the physical integrity of the composite by filling the spaces between the hemp aggregates.
Each year, hundreds of millions of tons of processed sugarcane generate, by weight, 25 to 30% of bagasse as waste, whose destination is combustion for energy cogeneration. This research proposes an alternative and more sustainable use for this waste. The use of sugarcane bagasse (SCB) as the single aggregate in composites for building blocks was studied. The raw bagasse was used without any treatment. As the binder, aerial lime and/or soil were used. Both provided enough mechanical strength for non-load-bearing walls. The composite of SCB with soil achieved the best performance in terms of mechanical resistance: 2.6 MPa in compressive strength and 2.1 MPa in bending strength, while the composite of SCB with lime achieved 1.76 MPa and 1.7 MPa, respectively. The higher number of fibers in the SCB/lime mixture provides better thermal insulation than clay brick or conventional concrete, such as “hempcrete”. The lime composites obtained greater water resistance and less loss of mechanical strength when saturated. However, the higher water absorption coefficient makes it necessary to apply a waterproof mortar on surfaces exposed to the weather. The replacement of supplied blocks by SCB blocks can offer a better and more economical solution that improves the quality of the built environment and is more ecofriendly.
The sustainable world’s economic growth and people’s life improvement greatly depend on the use of alternative products in the architecture and construction, such as industrial wastes conventionally called “green materials”. This paper concerns the main results of an experimental work carried out with the objective of developing new composite materials based on gypsum and incorporating waste material as granulated cork, a by-product of cork industry, and cellulose fibres, a waste of paper industry. Such materials are intended to be used as composite boards for non structural elements of construction, such as dry walls and ceiling. Cork (bark of the plant Quercus Suber L), a substance largely produced in Portugal, is a material whose characteristics are of considerable interest for the construction industry. It is regarded as a strategic material with enormous potential by its reduced density, elasticity, compressibility, waterproof, vibration absorption, thermal and acoustic insulation efficiency [1]. During the first stage of this research work the gypsum binder and its properties were studied. Then, composites with mineral additions (added to increase the waterproofing and resistance) were also developed and submitted to tests to determine their physical and mechanical properties. In last stage, reinforced composites using different industrial by-products have been developed. This paper will present the properties and the manufacture methods used to produce the above mentioned eco-friendly composites that can ease ways for using industrial wastes as new construction materials, with excellent inherent thermal and acoustic properties.