Model predictive control (MPC) is an efficient and growing approach to power converter control. This paper proposes an improved and simplified model predictive current control (MPCC) technique for a four-level nested neutral point clamped (4L-NNPC) converter. Conventional MPCC exhibits better performances as compared to the conventional linear control system such as fast dynamic response, consideration of the system constraints, and nonlinearities. However, the application of the conventional model predictive current control (MPCC) approach on complex systems provokes a significant number of calculations, which is the main hurdle to its practical implementation. To fix this flaw, this paper proposes an effective algorithm to shorten the execution time of the conventional MPCC. In this proposed technique, 216 current predictions of the conventional MPCC are skipped and converted into one required voltage vector (RVV) prediction. With this equivalent reference voltage transformation, the calculation burden of MPCC is significantly reduced, while the output performance is not influenced. The results of the simplified MPCC for the 4L-NNPC converter are analyzed and compared with the conventional MPCC. The computational time is reduced by 19.56% using the simplified MPCC, while keeping an approximately similar error of output currents. The switching frequency and total harmonic distortion (THD) of the proposed method are reduced by 8.16% and 0.07%, respectively, as compared to the conventional technique. These results demonstrate the fact that that the performance of a conventional MPCC is enhanced with the proposed MPCC. The proposed algorithm can be applied to several inverter topologies.
11 December 2025 in Journal of Electrical Systems and Information Technology
Interior Permanent Magnet Synchronous Motors (IPMSMs) are a leading technology for electric vehicles (EVs) owing to their high efficiency and power density, yet their performance is limited by torque ripple, drive losses, and sensitivity to parameter variations. This paper presents a robust rotor profile optimization (RPO) framework that integrates a modified adaptive particle swarm optimization (MAPSO) algorithm with finite-element analysis to enhance torque production and minimize torque fluctuations. Unlike conventional optimization approaches, the proposed framework incorporates sensitivity and robustness evaluation, ensuring stable performance under input uncertainties. The optimized rotor design achieves an 8.65% increase in average torque (92.45 → 100.45 Nm), a 69.61% reduction in torque ripple (22.17% → 6.74%), and a slight efficiency improvement (97.08% → 97.12%) while maintaining the same 25 kW power rating and 2250 rpm base speed. Additionally, the 6% refers to the overall or representative robustness level, confirming robustness against parameter deviations. These results demonstrate that the proposed optimization method enables reliable rotor geometry refinement within the same motor envelope, leading to higher torque density, reduced pulsations, and improved suitability for high-performance EV traction applications.