Raja Ram  Pradhananga

Dr. Raja Ram Pradhananga


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 February 2019 in C
Verified
Journal Article
Open access
PDF file
Lok ShresthaLok Shrestha
Lok Shrestha
MTMamata Thapa
Mamata Thapa
RSRekha Goswami Shrestha
Rekha Goswami Shrestha
SMSubrata Maji
Subrata Maji
RPRaja Ram Pradhananga
Raja Ram Pradhananga
Katsuhiko ArigaKatsuhiko Ariga
Katsuhiko Ariga
Iodine and methylene blue adsorption properties of the high surface area nanoporous carbon materials derived from agro-waste and rice husk is reported. Rice husk was pre-carbonized at 300 °C in air followed by leaching out the silica nanoparticles by extraction with sodium hydroxide solution. The silica-free rice husk char was mixed with chemical activating agents sodium hydroxide (NaOH), zinc chloride (ZnCl2), and potassium hydroxide (KOH) separately at a mixing ratio of 1:1 (wt%) and carbonized at 900 °C under a constant flow of nitrogen. The prepared carbon materials were characterized by scanning electron microscopy (SEM), Fourier transformed-infrared spectroscopy (FT-IR), powder X-ray diffraction (pXRD), and Raman scattering. Due to the presence of bimodal micro- and mesopore structures, KOH activated samples showed high specific surface area ca. 2342 m2/g and large pore volume ca. 2.94 cm3/g. Oxygenated surface functional groups (hydroxyl, carbonyl, and carboxyl) were commonly observed in all of the samples and were essentially non-crystalline porous particle size of different sizes (<200 μm). Adsorption study revealed that KOH activated samples could be excellent material for the iodine and methylene blue adsorption from aqueous phase. Iodine and methylene blue number were ca. 1726 mg/g and 608 mg/g, respectively. The observed excellent iodine and methylene blue adsorption properties can be attributed to the well-developed micro- and mesopore structure in the carbon material. This study demonstrates that the agricultural waste, rice husk, and derived nanoporous carbon materials would be excellent adsorbent materials in water purifications.

11 April 2020 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Lok ShresthaLok Shrestha
Lok Shrestha
RSRekha Goswami Shrestha
Rekha Goswami Shrestha
SMSubrata Maji
Subrata Maji
BPBhadra P. POKHAREL
Bhadra P. POKHAREL
RRRinita Rajbhandari
Rinita Rajbhandari
Katsuhiko ArigaKatsuhiko Ariga
Katsuhiko Ariga
Nanoporous activated carbon materials derived from agro-wastes could be suitable low-cost electrode materials for high-rate performance electrochemical supercapacitors. Here we report high surface area nanoporous carbon materials derived from Lapsi seed agro-waste prepared by zinc chloride (ZnCl2) activation at 700 °C. Powder X-ray diffraction (pXRD) and Raman scattering confirmed the amorphous structure of the resulting carboniferous materials, which also incorporate oxygen-containing functional groups as confirmed by Fourier transform infrared (FTIR) spectroscopy. Scanning and transmission electron microscopy (SEM and TEM) analyses revealed the granular, nanoporous structures of the materials. High-resolution TEM (HR-TEM) confirmed a graphitic carbon structure containing interconnected mesopores. Surface areas and pore volumes of the materials were found, respectively, in the ranges from 931 to 2272 m2 g−1 and 0.998 to 2.845 cm3 g−1, and are thus superior to commercially available activated carbons. High surface areas, large pore volumes and interconnected mesopore structures of these Lapsi seed-derived nanoporous carbon materials lead to their excellent electrochemical supercapacitance performance in aqueous electrolyte (1 M H2SO4) with a maximum specific capacitance of 284 F g−1 at a current density of 1 A g−1. Furthermore, the electrodes showed high-rate capability sustaining 67.7% capacity retention even at high current density of 20 A g−1 with excellent cycle stability achieving 99% capacitance retention even after 10,000 charge–discharge cycles demonstrating the potential of Lapsi seed derived nanoporous carbons as suitable electrode materials in high-performance supercapacitor devices.

1 April 2023 in Heliyon
Verified
Journal Article
Open access
DSDevendra Shrestha
Devendra Shrestha
TNTulsi Nayaju
Tulsi Nayaju
MKM.R. Kandel
M.R. Kandel
RPRaja Ram Pradhananga
Raja Ram Pradhananga
CPChan Hee Park
Chan Hee Park
CKCheol Sang Kim
Cheol Sang Kim
Biogenic silica nanoparticle is a superb alternative to synthetic silica because of their highly active, polar, and porous nanostructure with a large interior area. Among the available agricultural bioresources, biogenic silica extracted from rice husks could be a simple, easily available, and cost-effective resource to use as the stationary phase for the column chromatographic technique. In the present study, highly pure amorphous biogenic silica nanoparticles (bSNPs) were synthesized using rice husk by a controlled combustion route followed by the sol-gel method. The bSNPs show better performance for the separation and isolation of ortho- and para-nitrophenol and nitroaniline. The outstanding performance of the as-synthesized bSNPs is attributed to the high surface area, high porosity, and presence of Si–OH polar bonds. These preliminary findings imply that rice husk, an agricultural waste, could be an alternative source of silica and applicable as a stationary phase in column chromatography.

26 April 2017 in C
Verified
Journal Article
Open access
PDF file
RPRaja Ram Pradhananga
Raja Ram Pradhananga
LALaxmi Adhikari
Laxmi Adhikari
RSRekha Goswami Shrestha
Rekha Goswami Shrestha
MAMandira Pradhanaga Adhikari
Mandira Pradhanaga Adhikari
RRRinita Rajbhandari
Rinita Rajbhandari
Lok ShresthaLok Shrestha
Lok Shrestha
In this paper, wool carpet dye adsorption properties of nanoporous activated carbon materials (NCMs) prepared from bamboo agro-product is reported. Bamboo cane powder was chemically activated with phosphoric acid at different temperatures (400, 500, and 600 °C) at an impregnation ratio of 1:1. We found that the specific surface area and the total pore volume of NCM increases with temperature giving the highest surface area and pore volume ca. 2130 m2·g−1 and 2.69 cc·g−1 at 600 °C. Owing to superior surface textural properties, bamboo-derived NCM showed excellent adsorption capacity for wool carpet dyes Lanasyn orange (LO) and Lanasyn gray (LG). The adsorption phenomena could be described by Langmuir/Freundlich adsorption isotherm models. The maximum adsorption capacity was ca. 2.60 × 103 and 3.04 × 103 mg·g−1 for LO and LG, respectively. The adsorption followed pseudo second order kinetics with the second order rate constant of 1.24 × 10−3 g·mg−1·min−1 (LO) and 7.69 × 10−4 g·mg−1·min−1 (LG), respectively. This study demonstrated that the high surface area NCMs prepared from agro-product can be used as efficient and cost-effective adsorbent materials for the removal of dyes from industrial effluent.

27 December 2021 in C
Verified
Journal Article
Open access
PDF file
SJSahira Joshi
Sahira Joshi
RSRekha Goswami Shrestha
Rekha Goswami Shrestha
RPRaja Ram Pradhananga
Raja Ram Pradhananga
Katsuhiko ArigaKatsuhiko Ariga
Katsuhiko Ariga
Lok ShresthaLok Shrestha
Lok Shrestha
Nanoporous carbon materials from biomass exhibit a high surface area due to well-defined pore structures. Therefore, they have been extensively used in separation and purification technologies as efficient adsorbents. Here, we report the iodine and methylene blue adsorption properties of the hierarchically porous carbon materials prepared from Areca catechu nut. The preparation method involves the phosphoric acid (H3PO4) activation of the Areca catechu nut powder. The effects of carbonization conditions (mixing ratio with H3PO4, carbonization time, and carbonization temperature) on the textural properties and surface functional groups were studied. The optimum textural properties were obtained at a mixing ratio of 1:1, carbonized for 3 h at 400 °C, and the sample achieved a high specific surface area of 2132.1 m2 g−1 and a large pore volume of 3.426 cm3 g−1, respectively. The prepared materials have amorphous carbon structures and contain oxygenated surface functional groups. Due to the well-defined micro-and mesopore structures with the high surface area and large pore volume, the optimal sample showed excellent iodine and methylene blue adsorption. The iodine number and methylene blue values were ca. 888 mg g−1 and 369 mg g−1, respectively. The batch adsorption studies of methylene dye were affected by pH, adsorbent dose, contact time, and initial concentration. The optimum parameters for the methylene blue adsorption were in alkaline pH, adsorbent dose of 2.8 g L−1, and contact time of 180 min. Equilibrium data could be best represented by the Langmuir isotherm model with a monolayer adsorption capacity of 333.3 mg g−1. Thus, our results demonstrate that the Areca catechu nut has considerable potential as the novel precursor material for the scalable production of high surface area hierarchically porous carbon materials that are essential in removing organic dyes from water.

23 November 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Lok ShresthaLok Shrestha
Lok Shrestha
RSRekha Goswami Shrestha
Rekha Goswami Shrestha
RCRashma Chaudhary
Rashma Chaudhary
RPRaja Ram Pradhananga
Raja Ram Pradhananga
BTBirendra Man Tamrakar
Birendra Man Tamrakar
Katsuhiko ArigaKatsuhiko Ariga
Katsuhiko Ariga
Biomass-derived activated carbon materials with hierarchically nanoporous structures containing nitrogen functionalities show excellent electrochemical performances and are explored extensively in energy storage and conversion applications. Here, we report the electrochemical supercapacitance performances of the nitrogen-doped activated carbon materials with an ultrahigh surface area prepared by the potassium hydroxide (KOH) activation of the Nelumbo nucifera (Lotus) seed in an aqueous electrolyte solution (1 M sulfuric acid: H2SO4) in a three-electrode cell. The specific surface areas and pore volumes of Lotus-seed–derived carbon materials carbonized at a different temperatures, from 600 to 1000 °C, are found in the range of 1059.6 to 2489.6 m2 g−1 and 0.819 to 2.384 cm3 g−1, respectively. The carbons are amorphous materials with a partial graphitic structure with a maximum of 3.28 atom% nitrogen content and possess hierarchically micro- and mesoporous structures. The supercapacitor electrode prepared from the best sample showed excellent electrical double-layer capacitor performance, and the electrode achieved a high specific capacitance of ca. 379.2 F g−1 at 1 A g−1 current density. Additionally, the electrode shows a high rate performance, sustaining 65.9% capacitance retention at a high current density of 50 A g−1, followed by an extraordinary long cycle life without any capacitance loss after 10,000 subsequent charging/discharging cycles. The electrochemical results demonstrate that Nelumbo nucifera seed–derived hierarchically porous carbon with nitrogen functionality would have a significant probability as an electrical double-layer capacitor electrode material for the high-performance supercapacitor applications.