Flexible pressure sensors are attracting great interest from researchers and are widely applied in various new electronic equipment because of their distinct characteristics with high flexibility, high sensitivity, and light weight; examples include electronic skin (E-skin) and wearable flexible sensing devices. This review summarizes the research progress of flexible pressure sensors, including three kinds of transduction mechanisms and their respective research developments, and applications in the fields of E-skin and wearable devices. Furthermore, the challenges and development trends of E-skin and wearable flexible sensors are also briefly discussed. Challenges of developing high extensibility, high sensitivity, and flexible multi-function equipment still exist at present. Exploring new sensing mechanisms, seeking new functional materials, and developing novel integration technology of flexible devices will be the key directions in the sensors field in future.

Highly conductive ink with low sintering temperature is important for printed electronics on paper substrate. Silver nanoparticles (Ag NPs) of different average radii ranging from 48 to 176 nm were synthesized by adjusting the Ag+ concentration in the reaction process. The electric resistivity of the Ag NP-based ink film in relation to Ag NP size, sintering temperature, amount of PVP capping agent on Ag NP surface, and morphology evolution of the film during heating process was investigated. It was found that the resistivity of the films reduced very rapidly with increasing particle size due above all to reduced amount of protective agent capping on the Ag NPs. A semi-empirical relationship between the resistivity and the particle size was proposed. With the help of this mathematical expression, one gains both systematic and detailed insight to the resistivity evaluation with regard to the Ag particle size. The optimal electric resistivity of 4.6 μΩ cm was achieved at 140 °C for 10 min which was very close to the resistivity value of bulk Ag (1.58 μΩ cm). Mechanical flexibility of the printed electronics with the Ag NP-based ink on paper substrates was investigated. The prints on the art coated paper exhibited better flexibility compared to that on the photopaper. This might be attributed to the surface coating composition, surface morphology of the paper, and their corresponding ink absorption property.

Flexible pressure sensors have attracted tremendous attention from researchers for their widely applications in tactile artificial intelligence, electric skin, disease diagnosis, and healthcare monitoring. Obtaining flexible pressure sensors with high sensitivity in a low cost and convenient way remains a huge challenge. In this paper, the composite dielectric layer based on the mixture of carbon nanotubes (CNTs) with different aspect ratios and polydimethylsiloxane (PDMS) was employed in flexible capacitive pressure sensor to increase its sensitivity. In addition, the screen printing instead of traditional etching based methods was used to prepare the electrodes array of the sensor. The results showed that the aspect ratio and weight fraction of the CNTs play an important role in improving the sensitivity of the printed capacitive pressure sensor. The prepared capacitive sensor with the CNTs/PDMS composite dielectric layer demonstrated a maximum sensitivity of 2.9 kPa⁻¹ in the pressure range of 0–450 Pa, by using the CNTs with an aspect ratio of 1250–3750 and the weight fraction of 3.75%. The mechanism study revealed that the increase of the sensitivity of the pressure sensor should be attributed to the relative permittivity increase of the composite dielectric layer under pressure. Meanwhile, the printed 3 × 3 and 10 × 10 sensor arrays showed excellent spatial resolution and uniformity when they were applied to measure the pressure distribution. For further applications, the flexible pressure sensor was integrated on an adhesive bandage to detect the finger bending, as well as used to create Morse code by knocking the sensor to change their capacitance curves. The printed and flexible pressure sensor in this study might be a good candidate for the development of tactile artificial intelligence, intelligent medical diagnosis systems and wearable electronics.

The thermally expandable microspheres (TEMs) were prepared through suspension polymerization with acrylonitrile (AN), methyl methacrylate (MMA) and methyl acrylate (MA) as the main monomers. Simultaneously, iso-pentane, n-hexane, iso-octane and other low-boiling hydrocarbons were prepared as blowing agents under two conditions, including high-pressure nitrogen and atmospheric conditions. The above physical foaming microspheres have a core-shell structure and excellent foaming effects. A layer of polyaniline (PANI) was deposited on the surface of the prepared TEMs by emulsion polymerization to obtain conductive and heat-expandable microspheres. Afterwards, the foaming ink was prepared by mixing the conductive TEMs and water-based ink. Finally, a conductive three-dimensional picture was obtained by screen-printing technology. This paper specifically focuses on the effects of particle size, morphology and the thermal expansion properties of the microspheres. The present research methods expect to obtain microspheres with a high foaming ratio, uniform particle size and antistatic properties, which may be applied to physical foaming ink.

Herein, a series of Ba_0.5Sr_0.5Al₂O₄: xEu²⁺ (x = 0.01, 0.02, 0.03, 0.04, 0.06) nanophosphors were synthesized by a combustion method. The investigation encompassed the characterization of the phase purity, morphology, elemental composition, and photoluminescence behavior of Ba_0.5Sr_0.5Al₂O₄: xEu²⁺ nanoparticles. Under excitation by 303 nm and 365 nm ultraviolet light, the nanoparticles exhibited blue-green emission arising from the 4f⁶5d→4f⁷ transition of Eu²⁺ ions. The optimal doping concentration was determined to be 2%. Notably, the nanoparticles demonstrated fluorescence lifetimes and quantum yields of 1010 ns ($\lambda$_ex = 303 nm), 112 ns ($\lambda$_ex = 365 nm), 10.5%, and 10.3%, respectively. Additionally, a comprehensive analysis of the band structure and electronic density of states was conducted, revealing a theoretical direct band gap of 4.05 eV for the Ba_0.5Sr_0.5Al₂O₄ host. In addition, the prepared fluorescent powder can be used to prepare fluorescent flexible films. This film does not change the characteristic emission of Eu²⁺ ions and has more stable physicochemical properties, which may be more suitable for use in harsh environments. Also, the fluorescent powder can be blended with polyacrylic acid to form colorless anti-counterfeiting ink that can be applied to banknotes as an anti-counterfeiting mark. A clover pattern was successfully printed using screen-printing technology, proving its potential application in the field of anti-counterfeiting.

Recent advancements in carbon nanotubes and graphene have driven significant research into other low-dimensional materials, with phosphorus-based materials emerging as a notable area of interest. Phosphorus nanowires and thin sheets show promise for applications in devices such as batteries, photodetectors, and field-effect transistors. However, the presence of multiple allotropes of phosphorus complicates their characterization. Accurate identification of these allotropes is essential for understanding their physical, optical, and electronic properties, which influence their potential applications. Researchers frequently encounter difficulties in consolidating literature for the confirmation of the structure of their materials, a process that can be time-consuming. This minireview addresses this issue by providing a comprehensive, side-by-side comparison of Raman and X-ray diffraction characteristic peaks, as well as electron microscopic images and lattice spacings, for the various phosphorus allotropes. To our knowledge, this is the first compilation to integrate all major structural fingerprints into unified summary tables, enabling rapid cross-referencing. This resource aims to support researchers in accurately identifying phosphorus phases during synthesis and device fabrication workflows. For example, distinguishing between red phosphorus polymorphs is crucial for optimizing anode materials in sodium-ion batteries, where electrochemical performance is phase-dependent.