Electric Vehicles (EVs) are rapidly becoming the forerunners of vehicle technology. First electric vehicles were overlooked because of not having adequate battery capacity and because of low efficiency of their electric motors. Developing semiconductor and battery technologies increased the interest in the EVs. Nevertheless, current batteries still have insufficient capacity. As a result of this, vehicles must be recharged at short distances (approximately 150 km). Due to scheduled departure and arrival times EVs appear to be more suitable for city buses rather than regular automobiles. Thanks to correct charging technology and the availability of renewable energy for electric buses, the cities have less noise and CO2 emissions. The energy consumption of internal combustion engines is higher than of the electric motors. In this paper, studies on the commercial electric vehicle charging methods will be reviewed and the plug-in charging processes will be described in detail. This study strives to answer the questions of how plug-in charging process communication has performed between the EV and Electric Vehicle Supply Equipment (EVSE).
The rapid and reliable diagnosis of anaerobic bacteria constitutes one of the key procedures in clinical microbiology. Automatic jar gassing systems are commonly used laboratory instruments for this purpose. The most critical factors affecting the cultivation performance of these systems are the level of residual oxygen remaining in the anaerobic jar and the reaction rate determined by the Pd/Al2O3 catalyst. The main objective of the presented study is to design and manufacture an enhanced jar gassing system equipped with an extremum seeking-based estimation algorithm that combines real-time data and a reaction model of the Pd/Al2O3 catalyst. The microkinetic behavior of the palladium catalyst was modeled through a learning-from-experiment methodology. The majority of microkinetic model parameters were derived from material characterization analysis. A comparative validation test of the designed cultivation system was conducted using conventional gas pouches via six different bacterial strains. The results demonstrated high cell viability, with colony counts ranging from 1.26 × 105 to 2.17 × 105 CFU mL−1. The favorable catalyst facets for water formation on Pd surfaces and the crystal structure of Pd/Al2O3 pellets were identified by X-Ray diffraction analysis (XRD). The doping ratio of the noble metal (Pd) and the support material (Al2O3) was validated via energy-dispersive spectroscopy (EDS) measurements as 0.68% and 99.32%, respectively. The porous structure of the catalyst was also analyzed by scanning electron microscopy (SEM). During the reference clinical trial, the estimation algorithm was terminated after 878 iterations, having reached its predetermined termination value. The measured and modelled reaction rates were found to converge with a root-mean-squared error (RMSE) of less than 10−4, and the Arrhenius parameters of ongoing catalytic reaction were obtained. Additionally, our research offers a comprehensive analysis of anaerobic jar gassing systems from an engineering perspective, providing novel insights that are absent from the existing literature.