Ship locks on mountain rivers usually experience difficulties owing to harsh flow conditions such as strong oblique flow and backflow, which significantly affect navigation safety and efficiency. To improve navigation conditions, a structural measure involving pile-foundation permeable dislocation-type diversion vanes, a new type of diversion structure, is proposed by analyzing the features and working mechanisms of the existing diversion structures. Based on a typical mountain ship lock—the Wuqiangxi Lock—model tests including various schemes were conducted to investigate the effects of the new diversion structure. The new diversion structure obtained better results than other existing diversion structures, particularly in terms of reducing the transverse flow velocity extremums. By controlling the diversion volume, stabilizing the deflection angle, and dissipating the flow energy, the new diversion structure could effectively weaken the oblique flow intensity at the entrance area. In addition, comparisons of its cost efficiency with that of a hybrid measure combining riverbed dredging and diversion piers was carried out. Moreover, its performance of practical application in the reconstruction project of the Wuqiangxi Lock was demonstrated. Based on the investigation presented herein, the new diversion structure is a promising approach for improving flow conditions at the entrance area of the lock approach.
To comprehensively examine the dynamic shear characteristics of the marine silica sand–geogrid interface under representative marine environmental conditions, a series of cyclic direct shear tests with controlled temperature were carried out using a custom-designed experimental apparatus. The interface between marine silica sand (particle size 0.075–2 mm) and a biaxial geogrid was examined across a wide temperature range (−5°C–80°C) and under varying normal stresses (50, 150, and 250 kPa). The coupled effects of temperature and normal stress on the interfacial cyclic shear response were systematically analyzed. The results demonstrate that the interfacial shear behavior is markedly influenced by the combined effects of temperature and normal stress. Under a normal stress of 50 kPa, the peak shear stress increases progressively with the number of loading cycles, indicating shear hardening behavior. At normal stress of 150 kPa, the peak shear stress gradually stabilizes, indicating a movement toward mechanical equilibrium. In contrast, at a normal stress of 250 kPa, the shear stress increases during the initial cycles but then declines, demonstrating a shift toward shear softening behavior. Additionally, as the temperature increases from −5 °C to 20 °C, both the interfacial strength and stiffness show noticeable improvement. However, further heating to 80 °C results in a significant deterioration of these mechanical properties. Notably, the interface behavior under 250 kPa exhibits the highest sensitivity to temperature variation. Furthermore, the maximum dynamic shear stiffness increases with temperature up to 20 °C and subsequently declines, whereas the damping ratio is highest during the initial cycle and gradually stabilizes with continued cyclic loading. The results emphasize the significant and interconnected impacts of temperature and normal stress on the dynamic behavior of the interface between marine silica sand and geogrid. These findings provide valuable insights for the design, improvement, and long-term assessment of geosynthetic-reinforced systems in marine engineering applications.