Artificial air entrainment has been widely used to avoid cavitation damage in spillways where high-velocity flow occurs, and its performance is very important for spillway safety. In order to evaluate the performance of the aeration system in the spillway tunnel of the Jinping-I Dam, which is the highest arched dam in the world to date, systematic prototype observation was conducted. Ventilation characteristics of the air supply system and aeration-related characteristics of the aeration devices were examined at the prototype scale. The results showed that air flows smoothly in the air intake well and the real effect of air entrainment of the aeration device was desirable. In contrast with results from laboratory tests with a physical model at a scale of 1/30 following the gravity similarity, it was found that air demand in the prototype is much greater, clearly indicating the scale effect. By summing up and analyzing the air demand ratio of the prototype to the model in some projects, the scale effect was found to be ignorable when the model scale was greater than 1/10. In addition, based on a series of prototype data on air demand, a brief evaluation of present calculation methods for air demand was conducted and a new form of calculation method for air demand related to unit width flow rate was established. The present prototype results can be used as a reference for similar engineering design, and to validate and verify numerical simulations as well as model tests.
Better understanding of the complex mechanical properties of ice is the foundation to predict the ice fail process and avoid potential ice threats. In the present study, uniaxial compressive strength and fracture mode of natural lake ice are investigated over moderate strain-rate range of 0.4–10 s−1 at −5 °C and −10 °C. The digital speckle correlation method (DSCM) is used for deformation measurement through constructing artificial speckle on ice sample surface in advance, and two dynamic load cells are employed to measure the dynamic load for monitoring the equilibrium of two ends’ forces under high-speed loading. The relationships between uniaxial compressive strength and strain-rate, temperature, loading direction, and air porosity are investigated, and the fracture mode of ice at moderate rates is also discussed. The experimental results show that there exists a significant difference between true strain-rate and nominal strain-rate derived from actuator displacement under dynamic loading conditions. Over the employed strain-rate range, the dynamic uniaxial compressive strength of lake ice shows positive strain-rate sensitivity and decreases with increasing temperature. Ice obtains greater strength values when it is with lower air porosity and loaded vertically. The fracture mode of ice seems to be a combination of splitting failure and crushing failure.
Ship locks on mountain rivers usually experience difficulties owing to harsh flow conditions such as strong oblique flow and backflow, which significantly affect navigation safety and efficiency. To improve navigation conditions, a structural measure involving pile-foundation permeable dislocation-type diversion vanes, a new type of diversion structure, is proposed by analyzing the features and working mechanisms of the existing diversion structures. Based on a typical mountain ship lock—the Wuqiangxi Lock—model tests including various schemes were conducted to investigate the effects of the new diversion structure. The new diversion structure obtained better results than other existing diversion structures, particularly in terms of reducing the transverse flow velocity extremums. By controlling the diversion volume, stabilizing the deflection angle, and dissipating the flow energy, the new diversion structure could effectively weaken the oblique flow intensity at the entrance area. In addition, comparisons of its cost efficiency with that of a hybrid measure combining riverbed dredging and diversion piers was carried out. Moreover, its performance of practical application in the reconstruction project of the Wuqiangxi Lock was demonstrated. Based on the investigation presented herein, the new diversion structure is a promising approach for improving flow conditions at the entrance area of the lock approach.
A joint distribution of significant wave heights () and peak wave periods () in the northwestern South China Sea is created using a conditional distribution model in this work. An unstructured triangular mesh wave model covering the northwestern South China Sea is established based on the third-generation spectral wave model SWAN. This wave model has been extensively validated against field data and was run from 1979 to 2020 to generate long enough one-hourly and . Four probability density functions including Normal, Lognormal, Gamma and 3P Weibull distributions are adopted to construct the marginal independent distribution of . The results show that the 3P Weibull distribution is more suitable in fitting the marginal distribution of compared to the other three distributions. Three combinations of dependence functions (), namely, power3 and exp3, insquare2 and asymdecrease3, and logistics4 and alpha3, are used to create the Normal and Lognormal distributions for . The estimations of dependence functions and corresponding fitted demonstrate that the using power3 and exp3 perform best in producing the conditional distribution of . In addition, the environmental contours derived by an IFORM are used to generate the extreme sea states with return periods of 1, 5, 10, 25, 50 and 100 years.
Floating, pouring, prefabrication, and temporary storage of the immersed tunnel element require mooring inside a harbor or a dock. However, the dynamics of a moored tunnel element in such semi-open waters are rarely studied, and some mechanisms are not well understood yet. Clarifying the dynamic response characteristics of a tunnel element moored inside a harbor is useful for the evaluation and design of the mooring system. In this paper, by carrying out physical model tests, the law of wave development in the harbor was investigated, and the motion response of the tunnel element and cable force of the mooring system were also measured. Dynamic response characteristics under different environmental factors, the influence of tunnel element load conditions, and the mutual interference of multiple elements moored simultaneously were analyzed. The results show that dynamic response characteristics under wind are significantly different from those under waves. Under no-load or half-load conditions, which correspond to greater freeboard-to-draft ratios, the dynamic responses of the tunnel element are more unfavorable than those under heavy-load or full-load conditions. The scheme of simultaneous mooring of multiple elements inside a harbor is feasible if there is appropriate spacing between them.