The industrial and environmental applications of laccase, especially in wastewater treatment, have gained focus in recent years. Therefore, developing the proper laccase immobilization techniques, which could improve the stability of the enzymes and simplify the required downstream processes, is needed. A novel two-step immobilization process was developed, resulting in cross-linked enzyme aggregates (CLEA) in the pores of the membrane. Laccase adsorption on a biodegradable cellulose acetate microfiltration membrane along with cross-linking was investigated to maximize the enzyme load and immobilization efficiency. The optimization was done regarding the: pH, temperature, enzyme concentration, adsorption time, cross-linker concentration, and temperature. It was concluded that the highest immobilization efficiency (76%) could be achieved in acidic buffers at 29 C with high surface activity (1174 U·m) at the cost of partial denaturation and membrane fouling. The membrane was successfully utilized for the enzymatic treatment of diclofenac, and 58% removal efficiency was achieved. The results indicated that cellulose acetate is a suitable carrier for adsorption-based immobilization of laccase for the potential for environmental utilisation.
Micropollutants are persistent and hazardous materials in low concentrations (ng·L− 1 – µg·L− 1), including substances such as pharmaceuticals, personal care products and industrial chemicals. The advancement of analytical chemistry has allowed for the detection of micropollutants; however, an efficient and economical treatment solution is yet to be installed. Fungal laccase has been a successful biocatalyst of these compounds. However, large-scale application of free enzyme is currently not feasible for removing water-borne micropollutants, partly due to relatively rapid loss in enzyme stability. In this paper, three types of cyclodextrin, α, β and γCD, were chosen to immobilise the laccase under various conditions with the aim to improve the stability of the enzyme. Laccase activity was chosen as a response parameter, and laccase-cyclodextrin binding was evaluated by Fourier-transform infrared spectroscopy (FTIR). Results showed an optimum using α-cyclodextrin immobilisation. At that level, α-cyclodextrin increased the half-life of laccase and slightly improved its activity in all tested pH by physically bonding to laccase. By protecting the enzyme structure, activity was maintained under a range of circumstances (acidic conditions, from 10°C to 50°C). Under room temperature and at pH 5, α-cyclodextrin-laccase nanocomposite had a better removal efficiency of diclofenac compared to free laccase of the same concentration.
15 October 2025 in Cleaner Engineering and Technology