A high-performance non-enzymatic glucose sensor based on hybrid metal-oxides is proposed. Dumbbell-shaped double-shelled hollow nanoporous CuO/ZnO microstructures (CuO/ZnO-DSDSHNM) were prepared via the hydrothermal method using pluronic F-127 as a surfactant. This structure is studied by various physicochemical characterizations such as scanning electron microscopy, X-ray diffraction spectroscopy, inductively coupled plasma atomic emission spectroscopy, elemental mapping techniques, X-ray photoelectron spectroscopy, and transmission electron microscopy. This unique CuO/ZnO-DSDSHNM provides both a large surface area and an easy penetrable structure facilitating improved electrochemical reactivity toward glucose oxidation. The prepared CuO/ZnO-DSDSHNM was used over the glassy carbon electrode (GCE) as the active material for glucose detection and then coated by Nafion to provide the proposed Nafion/CuO/ZnO-DSDSHNM/GCE. The fabricated glucose sensor exhibits an extremely wide dynamic range from 500 nM to 100 mM, a sensitivity of 1536.80 µA mM−1 cm−2, a low limit of detection of 357.5 nM, and a short response time of 1.60 s. The proposed sensor also showed long-term stability, good reproducibility, favorable repeatability, excellent selectivity, and satisfactory applicability for glucose detection in human serum samples. The achieved high-performance glucose sensing based on Nafion/CuO/ZnO-DSDSHNM/GCE shows that both the material synthesis and the sensor fabrication methods have been promising and they can be used in future researches.
In this work, the process of designing and simulating optical sensors based on photonic crystal (PC) micro-ring resonators (MRRs) has been investigated. According to the PC type, different waveguides and resonators can be designed, and various topologies can be proposed from their combination, for optical sensor applications. Here, the investigated MRR is of the symmetrical micro-hexagonal ring resonator (MHRR) type. Different arrays of MHRR arrangement have been designed to investigate their effects on the output spectrum. The results of the design and simulation of different topologies have been analyzed and compared with other numerical researches. Considering all the necessary aspects of PC optical sensors, a detailed and comprehensive algorithm has been presented for designing these devices and choosing the optimal structure. In a more complementary process, the effects of reflector rods have been investigated, which indicates the existence of similarity and compatibility in the design between the distance of reflector rods and the length of MHRRs to obtain the optimal structure. Finally, the effect of different values of lattice constant and radius of dielectric rods on FWHM, transmission (TR) and resonant wavelength is studied, and the most optimal mode is presented. In order to measure the performance of the proposed optimal sensor, its application for gas detection has been analyzed. TR, FWHM, quality factor (QF), sensitivity (S) and figure of merit (FOM) of the proposed sensor were equal to 96%, 0.31 nm, 2636, 6451 nm/RIU and 2960 RIU−1 respectively. An examination of results from similar research indicates a rational and effective approach for generating diverse topologies, aiming to attain the most optimal configuration for optical sensors employing MRRs. Furthermore, employing a systematic design process based on established principles and the proposed algorithm helps prevent arbitrary parameter variations, facilitating the attainment of desired outcomes in a more streamlined and efficient manner. Given the comprehensive nature of this research, it presents a viable solution for designing optical devices based on MRRs for use in optical integrated circuits (OICs) applications.
Quantum dots (QDs) are used progressively in sensing areas because of their special electrical properties due to their extremely small size. This paper discusses the gas sensing features of QD-based resistive sensors. Different types of pristine, doped, composite, and noble metal decorated QDs are discussed. In particular, the review focus primarily on the sensing mechanisms suggested for these gas sensors. QDs show a high sensing performance at generally low temperatures owing to their extremely small sizes, making them promising materials for the realization of reliable and high-output gas-sensing devices.
In this paper, a selective and sensitive photonic crystal (PC) sensor is designed to detect two types of alcohol, namely ethanol and methanol and to measure their concentration percentages. The use of different concentrations of each compound leads to a change in their densities which have definite correlations with the refractive indexes based on the Gladstone–Dale theory. According to the experimental results and the Gladstone–Dale theory, the value of the refractive index in different percentages of alcohols overlaps, which makes it difficult to detect them with optical techniques. We present a new solution to solve this problem, which is very interesting. The FWHMs for spectrum of the ethanol and methanol mixtures with water are obtained as 1.2 nm and 1.4 nm, respectively. This way, it is possible to distinguish between two types of alcohols. After this process and by diluting the solution of each of the alcohols below 30%, the overlap of the refractive indexes is prevented and the obtained resonance wavelength can be attributed to a determined percentage of alcohol. The performance parameters of the proposed sensor for both alcohols are quite promising so that the transmission, the quality factor, the sensitivity and the FOM are above 97%, 1092, 756 nm/RIU and 593.9 RIU-1 respectively. Even, when two typical samples have the same refractive indexes, the sensor can distinguish the alcohol type and the sample’s concentration. This capability along with the small size (123 μm2) and high sensitivity, are the special features of the proposed PC sensor.
20 August 2020 in Biotechnology and Bioprocess Engineering
In this paper, we have developed an in-vehicle wireless driver breath alcohol detection (IDBAD) system based on Sn-doped CuO nanostructures. When the proposed system detects the ethanol trace in the driver`s exhaled breath, it can alarm and then prevents the car to be started and also sends the location of the car to the mobile phone. The sensor used in this system is a two-sided micro-heater integrated resistive ethanol gas sensor fabricated based on Sn-doped CuO nanostructures. Pristine and Sn-doped CuO nanostructures were synthesized as the sensing materials. The micro-heater is calibrated to provide the desired temperature by applying voltage. The results showed that by Sn-doping in CuO nanostructures, the sensor performance can be significantly improved. The proposed gas sensor has a fast response, good repeatability along with good selectivity that makes it suitable for being used in practical applications such as the proposed system.