Maria Camila Montoya Ospina

Mrs. Maria Camila Montoya Ospina

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 October 2022 in Polymer Engineering & Science
Verified
Journal Article
Open access
MOMaria Camila Montoya Ospina
Maria Camila Montoya Ospina
HVHenk Verhoogt
Henk Verhoogt
MOMark Ordner
Mark Ordner
XTXiao Tan
Xiao Tan
TOTim A. Osswald
Tim A. Osswald
Maleic anhydride‐grafted‐polyethylene was dynamically cross‐linked via reactive melt blending with 4,4′‐dithiodianiline. Thermal and mechanical properties of polyethylene vitrimers with different cross‐linking density were investigated. The results indicate that the degree of crystallinity decreased with increasing cross‐linking density. This behavior was directly related to short‐term and long‐term mechanical properties: vitrimers showed a decrease in yield strength and creep performance. The yield strength of PE vitrimers decreased linearly in relation to the degree of crystallinity. Polarized optical microscopy revealed that the cross‐links inhibit the growth of spherulites structure in polyethylene vitrimers. Thermogravimetric analysis indicated an increase in the onset degradation temperature and decomposition rate for vitrimers with increased cross‐linking density. The stiffness of the vitrimers decreased with increasing cross‐linking density which led to higher damping properties. Finally, it was demonstrated that reprocessing of polyethylene vitrimer was possible without significant impact in mechanical properties.

3 December 2021 in SPE Polymers
Verified
Journal Article
Open access
PDF file
MOMaria Camila Montoya Ospina
Maria Camila Montoya Ospina
HVHenk Verhoogt
Henk Verhoogt
TOTim A. Osswald
Tim A. Osswald
Vitrimers are a new class of materials that consist of chemically cross-linked networks that engage in thermoactivated associative exchange reactions. These exchange reactions can impart malleability, healing, and recyclability properties to thermosets. In this study, a one-step protocol to prepare linear low-density polyethylene (LLDPE) vitrimer-like materials with disulfide exchange bonds via reactive blending is presented. The cross-linking reaction of maleic anhydride-grafted-linear low-density polyethylene (LLDPE-MAH) and 4,4′-dithiodianiline was followed in a torque rheometer. The degree of MAH-functionalization and its impact on the melt rheology, dynamic mechanical properties, and thermal properties of the vitrimer was studied. The cross-linked LLDPE possessed a mostly elastic behavior, with storage modulus ( G ′) higher than loss modulus ( G ′ ′) in the entire frequency range. The complex viscosity of cross-linked LLDPE at high frequencies (>100 rad/s) was comparable to the thermoplastic LLDPE. The MAH-groups and formation of cross-links decreased the degree of crystallinity, which led to a decrease in the storage modulus at a temperature of 35°C. The storage modulus and dimensional stability of the materials improved with cross-linking density, suggesting potential benefits of LLDPE vitrimers in secondary manufacturing processes. Finally, the reprocessing ability was demonstrated via internal mixing and the rheological and mechanical properties were retained.

7 March 2023 in Polymers
Verified
Journal Article
Open access
PDF file
MOMaria Camila Montoya Ospina
Maria Camila Montoya Ospina
JZJiachen Zeng
Jiachen Zeng
XTXiao Tan
Xiao Tan
Tim OsswaldTim Osswald
Tim Osswald
Polyethylene (PE) is one of the most widely used polymers in conventional polymer manufacturing processes. However, it remains a challenge to use PE in extrusion-based additive manufacturing (AM). Some of the challenges that this material presents include low self-adhesion and shrinkage during the printing process. These two issues lead to higher mechanical anisotropy when compared to other materials, along with poor dimensional accuracy and warpage. Vitrimers are a new class of polymers that have a dynamic crosslinked network, allowing the material to be healed and reprocessed. Prior studies on polyolefin vitrimers suggest that the crosslinks reduce the degree of crystallinity and increase the dimensional stability at elevated temperatures. In this study, high-density polyethylene (HDPE) and HDPE vitrimers (HDPE-V) were successfully processed using a screw-assisted 3D printer. It was demonstrated that HDPE-V were able to reduce shrinkage during the printing process. This shows that 3D printing with HDPE-V will provide better dimensional stability when compared to regular HDPE. Furthermore, after an annealing process, 3D-printed HDPE-V samples showed a decrease in mechanical anisotropy. This annealing process was only possible in HDPE-V due to their superior dimensional stability at elevated temperatures, with minimal deformation above melting temperature.

28 March 2022 in Materials
Verified
Journal Article
Open access
PDF file
GCGerardo Mazzei Capote
Gerardo Mazzei Capote
MOMaria Camila Montoya Ospina
Maria Camila Montoya Ospina
ZLZijie Liu
Zijie Liu
MMMichael Sabatini Mattei
Michael Sabatini Mattei
BLBoyuan Liu
Boyuan Liu
Tim OsswaldTim Osswald
Tim Osswald
Additive Manufacturing (AM) techniques allow the production of complex geometries unattainable through other traditional technologies. This advantage lends itself well to rapidly iterating and improving upon the design of microwave photonic crystals, which are structures with intricate, repeating features. The issue tackled by this work involves compounding a high-permittivity material that can be used to produce 3D microwave photonic structures using polymer extrusion-based AM techniques. This material was acrylonitrile butadiene styrene (ABS)-based and used barium titanate (BaTiO3) ceramic as the high-permittivity component of the composite and involved the use of a surfactant and a plasticizer to facilitate processing. Initial small amounts of the material were compounded using an internal batch mixer and studied using polymer thermal analysis techniques, such as thermogravimetric analysis, rheometry, and differential scanning calorimetry to determine the proper processing conditions. The production of the material was then scaled up using a twin-screw extruder system, producing homogeneous pellets. Finally, the thermoplastic composite was used with a screw-based, material extrusion additive manufacturing technique to produce a slab for measuring the relative permittivity of the material, as well as a preliminary 3D photonic crystal. The real part of the permittivity was measured to be 12.85 (loss tangent = 0.046) in the range of 10 to 12 GHz, representing the highest permittivity ever demonstrated for a thermoplastic AM composite at microwave frequencies.

30 November 2021 in ChemRxiv
Verified
Preprint
Open access
PDF file
GCGerardo A. Mazzei Capote
Gerardo A. Mazzei Capote
MOMaria Camila Montoya Ospina
Maria Camila Montoya Ospina
ZLZijie Liu
Zijie Liu
MMMichael S. Mattei
Michael S. Mattei
BLBoyuan Liu
Boyuan Liu
TOTim A. Osswald
Tim A. Osswald
Additive Manufacturing techniques allow the production of complex geometries unattainable through other traditional technologies. This advantage lends itself well to rapidly iterate and improve upon the design of microwave photonic devices, which are structures with intricate, repeating features. The issue tackled by this work involves compounding a high-dielectric constant material that can be used to produce 3D topological structures using polymer extrusion-based AM techniques. This material was ABS based, and used barium titanate ceramic as the high-dielectric compound of the composite, and involved the use of a surfactant and a plasticizer to facilitate processing. Initial small amounts of material were compounded using an internal batch mixer, and studied using polymer thermal analysis techniques, such as thermogravimetric analysis, rheometry, and differential scanning calorimetry to determine the proper processing conditions. The production of the material was then scaled-up through the use of a twin-screw extruder system, producing homogeneous pellets. Finally, the thermoplastic composite was used with a screw-based, material extrusion additive manufacturing technique to produce a slab for measuring the dielectric constant of the material, as well as a preliminary 3D photonic crystal. The real part of dielectric constant of the composite was measured to be 12.85 in the range of 10GHz to 12GHz, representing the highest dielectric constant ever demonstrated for a thermoplastic AM composite at microwave frequencies. The dielectric loss tangent was equal to 0.046, representing a low-loss dielectric.