Power-to-heat technology represents a promising solution for the decarbonization of the energy sector. The installation of large-scale heat pumps within district heating systems is widely recognized to be a cost-effective and competitive way to provide flexibility to the electric system, enhancing the use of intermittent renewable energy sources. The goal of this paper is to show how the economic and environmental benefits provided by the installation of a large-scale heat pump in existing district heating systems vary according to the installation location in different scenarios. To do that, an integrated methodology is developed. This includes a physical model of the thermo-fluid dynamic of the district heating network and a detailed modeling of the heat pump. To compare the different positions and also the different operating conditions, an approach based on exergy analysis is adopted. Moreover, a specific control strategy of the mass-flow rate is analyzed to further reduce greenhouse gas emissions. The application to a real large-scale district heating network shows that reductions in CO2 emissions of almost 4% can be obtained by installing a single heat pump of about 4 MWe (over a total thermal load of about 305 MWt), while this positive effect can be reduced by up to 63% if placing the heat pump at non-optimal locations.
The combination of different energy vectors in the context of multi-energy systems is a crucial opportunity to reach CO2 reduction goals. In the case of urban areas, multi-energy districts can be connected with district heating networks to efficiently supply heat to the buildings. In this framework, the inclusion of the thermal demand response allows for significantly improve the performance of multi-energy districts by smartly modifying the heat loads. Operation optimization of such systems provides excellent results but requires significant computational efforts. In this work, a novel approach is proposed for the fast optimization of multi-energy district operations, enabling real-time demand response strategies. A 3-step optimization method based on mixed integer linear programming is proposed aimed at minimizing the cost operation of multi-energy districts. The approach is applied to a test case characterized by strongly unsteady heat/electricity and cooling demands. Results show that (a) the total operation cost of a multi-energy district can be reduced by order of 3% with respect to optimized operation without demand side management; (b) with respect to a full optimization approach, the computational cost decreases from 45 min to 1 s, while the accuracy reduces from 3.6% to 3.0%.
26 August 2024 in IEEE Transactions on Sustainable Computing
Integrated modeling and simulation are crucial for optimizing cities' energy planning. Existing sector-specific analyses have implementation limitations in representing interactions across infrastructures, limiting optimization potentials. An integrated framework simulating multiple interacting components from a systemic perspective could reveal efficiency gains, flexibility, and synergies across urban energy networks to guide sustainable energy transitions. Co-simulation approaches are gaining attention for analyzing complex interconnected systems like District Heating (DH). Traditional single-discipline models present limitations in fully representing the interconnectivity between district heating networks and related subsystems such as those in buildings and energy generation. Therefore, we propose a co-simulation based framework to simulate DH system behavior while easily integrating models of other subsystems and Functional Mock-up Unit (FMU) simulators. We tested this Plug&Play modular framework for Demand Side Management (DSM) and Storage-based strategies, evaluating their effectiveness in peak reduction while lowering the temperatures of the network.