Titanium, stainless steel, and CoCrMo alloys are the most widely used biomaterials for orthopedic applications. The most common causes of orthopedic implant failure after implantation are infections, inflammatory response, least corrosion resistance, mismatch in elastic modulus, stress shielding, and excessive wear. To address the problems associated with implant materials, different modifications related to design, materials, and surface have been developed. Among the different methods, coating is an effective method to improve the performance of implant materials. In this article, a comprehensive review of recent studies has been carried out to summarize the impact of coating materials on metallic implants. The antibacterial characteristics, biodegradability, biocompatibility, corrosion behavior, and mechanical properties for performance evaluation are briefly summarized. Different effective coating techniques, coating materials, and additives have been summarized. The results are useful to produce the coating with optimized properties.

Pakistan is facing a severe energy crisis due to its heavy dependency on the import of costly fossil fuels, which ultimately leads to expansive electricity generation, a low power supply, and interruptive load shedding. In this regard, the utilization of available renewable energy resources within the country for production of electricity can lessen this energy crisis. Livestock waste/manure is considered the most renewable and abundant material for biogas generation. Pakistan is primarily an agricultural country, and livestock is widely kept by the farming community, in order to meet their needs. According to the 2016–2018 data on the livestock population, poultry held the largest share at 45.8%, followed by buffaloes (20.6%), cattle (12.7%), goats (10.8%), sheep (8.4%), asses (1.3%), camels (0.25%), horses (0.1%), and mules (0.05%). Different animals produce different amounts of manure, based upon their size, weight, age, feed, and type. The most manure is produced by cattle (10–20 kg/day), while poultry produce the least (0.08–0.1 kg/day). Large quantities of livestock manure are produced from each province of Pakistan; Punjab province was the highest contributor (51%) of livestock manure in 2018. The potential livestock manure production in Pakistan was 417.3 million tons (Mt) in 2018, from which 26,871.35 million m³ of biogas could be generated—with a production potential of 492.6 petajoules (PJ) of heat energy and 5521.5 MW of electricity. Due to its favorable conditions for biodigester technologies, and through the appropriate development of anaerobic digestion, the currently prevailing energy crises in Pakistan could be eliminated.

Biofuels are environmental friendly renewable fuels, that can be directly used in a diesel engine. However, a few shortcomings like a higher density, viscosity, a lower calorific value and increase in NOx emissions, has caused researchers to look for fuel additives to improve the physiochemical properties of these fuels and to enhance their performance and reduce harmful emissions. It is for this reason that modern research is focused on blending oxygenated additives such as alcohols and ethers with different generations of biodiesel. Since most studies have covered the effect of alcohol on biodiesel, there are few studies which have investigated the effect of oxygenated additives such as alcohols and ethers, especially related to second-generation biodiesel. Moreover, the details of their composition and molecular structure are still lacking. Hence, this study focuses on the performance and emission characteristics of biodiesel with the inclusion of oxygenated additives (alcohols and ethers) of non-edible-oil-based second-generation blends. The reviewed results showed that Neem biodiesel with methanol or diethyl ether reduced brake-specific fuel consumption by 10%, increased brake thermal efficiency by 25% and reduced CO and HC emissions due to a higher oxygen content. Diethyl ether reduced NOx emissions as well by producing a cooling effect, i.e., a reduced in-cylinder temperature. The addition of heptane, butanol and di ethyl ether to Jatropha biodiesel showed an improved brake thermal efficiency and an increment in brake-specific fuel consumption (5–20%), with reduced HC and CO₂ (3–12%) emissions. Calophyllum inophyllum biodiesel also showed impressive results in terms of improving efficiency and reducing emissions with addition of butanol, pentanol, decanol and hexanol. Other factors that influenced emissions are the cetane number, viscosity, density and the latent heat of evaporation of tested biodiesel blends. This review would help the research community and the relevant industries to consider an efficient biodiesel blend for future study or its implementation as an alternate fuel in diesel engines.

Poultry are one of the most vulnerable species of its kind once the temperature-humidity nexus is explored. This is so because the broilers lack sweat glands as compared to humans and undergo panting process to mitigate their latent heat (moisture produced in the body) in the air. As a result, moisture production inside poultry house needs to be maintained to avoid any serious health and welfare complications. Several strategies such as compressor-based air-conditioning systems have been implemented worldwide to attenuate the heat stress in poultry, but these are not economical. Therefore, this study focuses on the development of low-cost and environmentally friendly improved evaporative cooling systems (DEC, IEC, MEC) from the viewpoint of heat stress in poultry houses. Thermodynamic analysis of these systems was carried out for the climatic conditions of Multan, Pakistan. The results appreciably controlled the environmental conditions which showed that for the months of April, May, and June, the decrease in temperature by direct evaporative cooling (DEC), indirect evaporative cooling (IEC), and Maisotsenko-Cycle evaporative cooling (MEC) systems is 7–10 °C, 5–6.5 °C, and 9.5–12 °C, respectively. In case of July, August, and September, the decrease in temperature by DEC, IEC, and MEC systems is 5.5–7 °C, 3.5–4.5 °C, and 7–7.5 °C, respectively. In addition, drop in temperature-humidity index (THI) values by DEC, IEC, and MEC is 3.5–9 °C, 3–7 °C, and 5.5–10 °C, respectively for all months. Optimum temperature and relative humidity conditions are determined for poultry birds and thereby, systems’ performance is thermodynamically evaluated for poultry farms from the viewpoint of THI, temperature-humidity-velocity index (THVI), and thermal exposure time (ET). From the analysis, it is concluded that MEC system performed relatively better than others due to its ability of dew-point cooling and achieved THI threshold limit with reasonable temperature and humidity indexes.