The influence of the carbohydrate-based wall matrix (glucose syrup, GS, and maltodextrin, MD21) and the storage temperature (4 °C or 25 °C) on the oxidative stability of microencapsulated fish oil was studied. The microcapsules (ca. 13 wt% oil load) were produced by spray-drying emulsions stabilized with whey protein hydrolysate (WPH), achieving high encapsulation efficiencies (>97%). Both encapsulating materials showed an increase in the oxidation rate with the storage temperature. The GS-based microcapsules presented the highest oxidative stability regardless of the storage temperature with a peroxide value (PV) of 3.49 ± 0.25 meq O2/kg oil and a content of 1-penten-3-ol of 48.06 ± 9.57 ng/g oil after six weeks of storage at 4 °C. Moreover, low-fat mayonnaise enriched with GS-based microcapsules loaded with fish oil and containing WPH as a film-forming material (M-GS) presented higher oxidative stability after one month of storage when compared to low-fat mayonnaise enriched with either a 5 wt% fish oil-in-water emulsion stabilized with WPH or neat fish oil. This was attributed to a higher protective effect of the carbohydrate wall once the microcapsules were incorporated into the mayonnaise matrix.
The secondary structure of whey protein concentrate hydrolysate (WPCH), used as an emulsifier in oil delivery systems, was investigated using Synchrotron Radiation Circular Dichroism (SRCD). The effect of pH on the conformation of peptides in solution and adsorbed at the oil/water interface, as well as the thermal stability of the systems was studied. Furthermore, oil-loaded microcapsules were produced by spray-drying or electrospraying to investigate the influence of encapsulating agents (glucose syrup, maltodextrin) and drying technique on the secondary structure of WPCH at the oil/water interface. Enzymatic hydrolysis resulted in peptides with a highly unordered structure (∼60% turns and unordered regions) in solution. However, WPCH adsorption onto the oil/water interface increased the α-helical content resulting in an improved thermal stability. The encapsulating agents and spray-drying process did not modify the conformation of WPCH at the oil/water interface. Nonetheless, electrospraying affected the SRCD spectra obtained for WPCH adsorbed at the oil/water interface.
The impact of the encapsulation technology on the oxidative stability of fish-oil-loaded capsules was investigated. The capsules (ca. 13 wt% oil load) were produced via monoaxial or coaxial electrospraying and spray-drying using low molecular weight carbohydrates as encapsulating agents (e.g., glucose syrup or maltodextrin). The use of spray-drying technology resulted in larger capsules with higher encapsulation efficiency (EE > 84%), whilst the use of electrospraying produced encapsulates in the sub-micron scale with poorer retention properties (EE < 72%). The coaxially electrosprayed capsules had the lowest EE values (EE = 53–59%), resulting in the lowest oxidative stability, although the lipid oxidation was significantly reduced by increasing the content of pullulan in the shell solution. The emulsion-based encapsulates (spray-dried and monoaxially electrosprayed capsules) presented high oxidative stability during storage, as confirmed by the low concentration of selected volatiles (e.g., (E,E)-2,4-heptadienal). Nonetheless, the monoaxially electrosprayed capsules were the most oxidized after production due to the emulsification process and the longer processing time.
The oxidative stability and the oxygen permeability of oil-loaded capsules were investigated by Electron Spin Resonance (ESR). The capsules were produced by spray-drying or electrospraying in the monoaxial or coaxial configuration using glucose syrup as the encapsulating agent. ESR-spin trapping results showed that electrosprayed capsules oxidized faster and during the early stages of incubation, irrespective of the emitter configuration (monoaxial or coaxial), when compared to those produced by spray-drying. Furthermore, ESR oximetry showed that oxygen inside the spray-dried capsules reached equilibrium with the surrounding atmosphere significantly slower than the monoaxially electrosprayed capsules (i.e., ∼2h and ∼10 min, respectively). These findings have been attributed to the larger particle size of the spray-dried capsules influencing the oxygen diffusion area (i.e., lower surface-to-volume ratio) and diffusion path (i.e., thicker encapsulating wall for a fixed oil load). Together, the lower oxygen uptake reported for the spray-dried capsules correlated well with their higher oxidative stability.
The encapsulation of fish oil by monoaxial electrospraying using kafirin or zein proteins as hydrophobic wall materials was investigated. Kafirin resulted in spherical fish oil-loaded nanocapsules (>50% of capsules below 1 µm), whereas zein led to fish oil-loaded nanocapsules with non-spherical morphology (>80% of capsules below 1 µm). Both hydrophobic encapsulating materials interacted with fish oil, successfully entrapping the oil within the protein matrix as indicated by Fourier-transform infrared spectroscopy (FTIR) and Raman spectroscopy results. FTIR also suggested hydrogen bonding between fish oil and the proteins. Trapped radicals in the encapsulation matrix that were detected by electron paramagnetic resonance (EPR), indicated oxidation during electrospraying and storage. Results from isothermal (140 °C) differential scanning calorimetry (DSC) denoted that the encapsulation of fish oil by electrospraying using both kafirin or zein as wall materials protected fish oil from oxidation. In particular, the zein-based nanocapsules were 3.3 times more oxidatively stable than the kafirin-based nanocapsules, which correlates with the higher oil encapsulation efficiency found for zein-based capsules. Thus, this study shows that kafirin might be considered a hydrophobic wall material for the encapsulation of fish oil by electrospraying, although it prevented lipid oxidation to a lower extent when compared to zein.