We consider a multiple-input multiple-output amplify-and-forward wireless multiple-hop sensor network (WMSN). The simultaneous wireless information and power transfer technology is deployed to potentially achieve an autonomous system. We investigate two practical receiver schemes, which are the power splitting (PS) and the time switching (TS). The power splitting receiver splits received signals into two streams, one for information decoding (ID) and the other for energy harvesting (EH). On the other hand, the time switching receiver only serves in ID mode or energy harvesting mode during a certain time slot. Subject to transmit power constraints and destination harvested energy constraint, we aim to obtain a joint beam-forming solution of source and relay precoders to maximize the maximum achievable rate of the WSN. In order to make the non-convex problem tractable, diagonalization-based alternating optimization algorithms are proposed. Numerical results show the convergence and good performance of the proposed algorithms under both PS and TS protocols.
Near field communication (NFC) has been a widely used radiofrequency identification (RFID) technology, credited to its convenience and security features. However, the transmitted signals can be easily eavesdropped or relayed in an open wireless channel. One of the challenges is relay attack, where an attacker simply relays the signal and bypasses encryption or other means in the application layer. Prior works on relay attack countermeasures have focused on distance-bounding protocols or ambient-based solutions. This paper focuses on ISO/IEC 14443-A and proposes an NFC relay detection method based on RF fingerprinting of transmitted wireless signals in the physical layer. To this end, we first designed and implemented two realizations of NFC relay attacks, wired and wireless relays, and built an SDR-based testbed. We collected the normal and relayed signals of four NFC tags, and the answer to request type A (ATQA) segments were selected for RF fingerprinting. The created dataset comprised 66,366 samples, with four tags’ normal and wired relayed signals and the wireless relayed signals. The dataset was then fed into a deep CNN for training. Finally, our experiment results showed that the method effectively distinguished normal and relayed signals with a high accuracy of 99%, confirming that RF fingerprinting can be a promising countermeasure to NFC relay attacks.
This paper proposes an approach to compute an EOH (edge-oriented histogram) descriptor with main orientation. EOH has a better matching ability than SIFT (scale-invariant feature transform) on multispectral images, but does not assign a main orientation to keypoints. Alternatively, it tends to assign the same main orientation to every keypoint, e.g., zero degrees. This limits EOH to matching keypoints between images of translation misalignment only. Observing this limitation, we propose assigning to keypoints the main orientation that is computed with PIIFD (partial intensity invariant feature descriptor). In the proposed method, SIFT keypoints are detected from images as the extrema of difference of Gaussians, and every keypoint is assigned to the main orientation computed with PIIFD. Then, EOH is computed for every keypoint with respect to its main orientation. In addition, an implementation variant is proposed for fast computation of the EOH descriptor. Experimental results show that the proposed approach performs more robustly than the original EOH on image pairs that have a rotation misalignment.
Nowadays, OpenID is a popular specification and provided by several large websites. It is decentralized, open standard to authenticate user's identity. We don't deny that OpenID has some disadvantages. In our proposal, we try to improve the performance of OpenID. The proposed OpenID authentication mechanism is embedded with One-time password (OTP) technology which solves the security problems of OpenID. We also illustrate the OpenID architecture with OTP and a typical authentication process between mobile terminal and OpenID provider. Finally, we analyses the system security and performance of OpenID. The results demonstrate the proposed authentication mechanism will be safer than the standard OpenID system.
The simultaneous wireless information and power transfer (SWIPT) technique has been regarded as an appealing approach to prolong the lifetime of wireless sensor networks. However, co-channel interferences with SWIPT in wireless networks have not been investigated from a green communication perspective. In this paper, joint transmit and receive beamforming design for a full-duplex multiple-input multiple-output amplify-and-forward relay system with simultaneous wireless information and power transfer in WSNs is investigated. Multiple co-channel interferers are considered at the relay and destination sensor nodes. To minimize the mean-squared-error of the system, joint source and relay beamforming optimization is proposed while guaranteeing the transmit power constraints and destination’s energy harvesting constraint. An iterative algorithm based on alternating optimization with successive convex approximation which converges to a local optimum is proposed to solve the non-convex problem. Moreover, a low-complexity scheme is derived to reduce the computational complexity. Simulations for MSE versus iterations and MSE versus signal-to-noise ratio (SNR) demonstrate the convergence and good performance of the proposed schemes.
In this article, we investigate a multi-user multiple-input-single-output full-duplex system with simultaneous wireless information and power transfer under the non-linear energy harvesting model, where channel state information is imperfect. Since the channel estimation error is considered in our proposed system, the self-interference cannot be canceled perfectly. For such a system, a robust optimization problem that maximizes the minimum average total harvested power by jointly optimizing the uplink and downlink beamforming matrices is formulated. As the problem is non-linear and non-convex under channel estimation errors, a novel Newton method based iterative optimization algorithm is proposed to solve it efficiently. In each iteration, the semidefinite relaxation technique and S-Procedure method are applied to obtain the optimal beamforming vectors, which are proved to be optimal solutions with rank-one. Simulation results reveal that the proposed robust design can achieve better system performance than the non-robust scheme, both of which are based on the non-linear energy harvesting model.